USA
Catalog   /   Tools & Gardening   /   Power Tools   /   Multi Power Tools

Comparison Pro-Craft PG 400 vs Intertool Storm WT-0516

Add to comparison
Pro-Craft PG 400
Intertool Storm WT-0516
Pro-Craft PG 400Intertool Storm WT-0516
from $23.00
Outdated Product
from $33.68 up to $39.96
Outdated Product
TOP sellers
Main
Tripod. Additional handle. Case for nozzles. Case.
Product typerotary engraverrotary engraver
Specs
Power consumption400 W170 W
Rotation speed10000 – 30000 rpm8000 – 35000 rpm
Collet diameter2.4, 3.2 mm3.2 mm
Features
Functions
speed controller
speed controller
Total number of nozzles4040
Power source
Power sourcemains (230 V)mains (230 V)
In box
Additional handle
Case (bag)
Flexible shaft
Tripod
General
Weight0.5 kg
Added to E-Catalogapril 2016november 2014

Power consumption

The electrical power consumed by the tool during normal operation. Usually, the characteristics indicate the power at the maximum speed / frequency of movements of the working nozzle.

Usually, the higher this indicator, the more intense the tool can act on the material being processed, the better it is suitable for difficult conditions (large volumes of work, hard materials). At the same time, note that high power significantly affects energy consumption; in mains-powered models (see below), this puts strain on the wiring, and in battery-powered models, it requires the use of bulky and heavy batteries and significantly reduces battery life. Yes, and this parameter significantly affects the dimensions, weight and price of the tool itself. Therefore, it is worth choosing a model according to power consumption, taking into account the specifics of the work for which it is planned to be used: for example, it hardly makes sense to purchase a high-performance professional tool for minor repairs around the house or in the country.

Specific recommendations on the optimal power values, depending on the type of tool and the purpose of its use, can be found in special sources.

Rotation speed

The speed of rotation of the working nozzle provided by the tool. Some models have a fixed rotation speed, others allow you to adjust it within a certain range (see "Number of speeds").

For different types of tools and types of work, different values of this parameter will be optimal; therefore, it is worth choosing taking into account the tasks that are planned to be solved using the tool (it is best to consult with special sources). We note only a couple of general patterns. So, for engraving on relatively soft and pliable materials (wood, glass, soft metals), high speed is not required, but for hard and difficult to process (steel, precious stones), a high-speed tool is better suited. But when drilling, note that for the same power consumption (see above), more revolutions, usually, means lower torque values. That is, here “high-speed” tools are better suited just for soft materials, and low-speed tools are better suited for hard and heavy materials.

Collet diameter

The diameter of the collet provided in the design of the rotary engraver (see "Device").

A collet is a specific type of fastening: a split sleeve, the “petals” of which can be compressed and unclenched by twisting / unscrewing the clamp. For a number of technical reasons, this mount is considered optimal for engravers. In order to properly install the working nozzle in such a tool, it is necessary that it fits the diameter of the collet (to be more precise, the mounting size of the nozzle should not exceed this diameter).

Note that there are several standard collet sizes. The most popular is 3.2 mm, but there are other options. And some engravers can be equipped with several mounts of different sizes.

Additional handle

The presence of an additional handle in the design or delivery set of the tool (it can be either built-in or removable).

This handle makes it easier to hold the tool with two hands, which is important when processing hard materials that require significant effort — or in delicate work, where precision and maximum control are important. Note that, as a standard, it is done based on right-handed users, however, many tools allow you to change the location of the handle, for the convenience of "left-handed" work.

Weight

The weight of the tool can be indicated according to different rules: some manufacturers take into account only the body without a nozzle, others — with a standard working nozzle, for multi-tools (see "Device") the weight of the main unit without a replaceable head, etc. can be indicated. These points are usually specified in the specifications or detailed documentation.

In the case of a power tool, weight has a dual meaning. On the one hand, the smaller it is, the easier it is to hold the unit in your hands during long work and the more convenient it is to carry out fine, accurate processing. On the other hand, a light tool is less stable and has an increased tendency to jerk, which is important under difficult conditions and hard materials.
Pro-Craft PG 400 often compared
Intertool Storm WT-0516 often compared