DIN size
The size of the car radio in width and height, which determines the possibility of installing it in a car. To successfully install the radio, it is necessary that the corresponding socket in the car is the same size as the radio itself, or larger.
The universal unit of measurement for installation dimensions is DIN: 1 DIN corresponds to a width of 178 mm and a height of 50 mm. In this case, devices of different standard sizes have the same width and differ only in height:
-
1 DIN. The most common size of modern car radios (see dimensions above).
-
2 DIN. This standard size corresponds to a radio height of 100 mm and a width of 178 mm. Typically, 2 DIN size devices have quite powerful devices with a large number of additional functions - for example, they are often equipped with large color screens, suitable even for watching videos.
A separate variety is the so-called.
standard radios. These are devices that were originally manufactured for a specific brand of car and, as a rule, are supplied immediately with them in one of the complete sets. Such radios have their own unique mounting dimensions, often not related to the DIN standard, as a result of which they cannot be installed in any car models other than tech for which they were originally intended. In addition, installation and dismantling of standard radios is usually much more diffi
...cult than that of universal ones. For additional information, see paragraph “Original radio for”.Front panel
Features of the design of the front panel installed in the radio. One device can combine several features at once - for example, the removable panel may well be folding.
—
Removable panel. Possibility to remove the front panel of the car radio and take it with you when leaving the car. The meaning of this function is to protect against theft: firstly, the front panel is the most accessible and attractive part of the radio for thieves; secondly, this reduces the likelihood of the theft of the radio itself, because a device without a control panel is of rather little value.
—
Retractable screen. A retractable screen is usually the preserve of premium radios. When folded, such a screen is hidden in the mounting socket of the radio in a horizontal position, and when working, it moves out and becomes vertical. Thus, with the relatively small dimensions of the radio itself (see Mounting size), it can be equipped with a fairly large screen, allowing you to even watch videos comfortably.
—
Motorized. This feature means that the display of the radio is equipped with a motor drive, due to which you can change the angle of the screen. This function is especially important in light of the fact that in relatively inexpensive types of matrices the image is normally visible only from a certain angle. However, the ability to adjust the tilt of the screen may be usef
...ul in any case.
- Tesla Style. The front panel is made in the style of the on-board computer of Tesla cars. The main feature of this design is a huge touch screen by the standards of a car radio (about 12"), from which you can control not only the radio, but also various functions of the car itself - for example, climate control. Accordingly, such radios have extensive capabilities. They They are usually standard (see “Original radio for”), and are produced not only for Tesla, but also for other car brands.Number of fixed settings
The number of fixed settings (presets) provided in the car radio equalizer.
The presence of such settings can greatly simplify the adjustment: choosing the right preset is easier than manually adjusting each EQ band. At the same time, presets are often selected by the manufacturer for certain genres of music and have the appropriate names — "Rock", "Pop", "Jazz", etc.; this simplifies the task even more. And the more fixed settings in the device, the wider the choice of the user. In some radio tape recorders, in addition to pre-flashed ones, user presets are also provided — they can be programmed in advance and turned on in the same way as the preset ones.
Tuner bands
— FM. This term refers to the part of the ultra-short wave (VHF) range ranging from 87.5 MHz to 108 MHz. It uses frequency modulation, which allows you to broadcast music in stereo with a fairly high sound quality, as well as transmit RDS signals (see RDS support). At the moment, most music radio stations in the CIS are broadcasting in this range. The disadvantage of FM is the limited reception area — a maximum of several tens of kilometers from the broadcasting station — so they can usually be listened to within the same city and surrounding areas.
— AM (English amplitude modulation — amplitude modulation) — broadcasting using amplitude modulation. It can be carried out in different bands, but most commercial broadcasts are carried out on medium waves in the range of 520-1610 kHz; most consumer AM receivers, including those in car radios, are designed for the same frequencies. AM broadcasting has a much longer reception range than FM (it can be hundreds of kilometers), but the sound quality is lower, so this format is broadcast mainly by “talk” and news radio stations.
— LW (English long wave) — broadcasting on long waves in the range of 148-408 kHz. Such broadcasting has a reception range of hundreds and even thousands of kilometers, and is almost independent of the time of day and atmospheric interference. It is used mainly at stations of national importance.
— MW (English medium wave) — broadcasting on medium waves in the range of 522-1...720 kHz, in fact — the same as AM (see above).
— SW (English short wave) — broadcasting on short waves, is carried out in a whole set of bands, the lower limit of which is at the level of 2.5 MHz, and the highest — 26.1 MHz. The features of the propagation of short waves are such that they can be received on the opposite side of the globe, but it is not always possible to hear within a few tens of kilometers from the transmitter. Therefore, shortwave broadcasting is mainly used for foreign broadcasts.
— VHF. In this case, not the entire VHF band is meant, but the sub-band 65.9-74 MHz, using the so-called OIRT modulation. In this format, VHF broadcasting was originally conducted in the countries of the Soviet Union and Eastern Europe, but at the moment it is not very popular due to the development of FM. VHF OIRT is technically similar to FM (see above); the main differences are the bandwidth occupied and the inability to transmit RDS signals in OIRT (see RDS support).
