USA
Catalog   /   Mobile Phones & Gadgets   /   Mobile Phones & Accessories   /   Powerbank

Comparison Power Plant PP-LA9263 vs Power Plant PB-LA9267

Add to comparison
Power Plant PP-LA9263
Power Plant PB-LA9267
Power Plant PP-LA9263Power Plant PB-LA9267
Outdated Product
from $29.00 up to $31.68
Outdated Product
TOP sellers
Battery capacity8000 mAh12000 mAh
Battery typeLi-PolLi-Pol
Charging gadgets (outputs)
USB-A22
Power bank charging
Power bank charging inputs
microUSB
microUSB
Power bank charge current via USB
1 А /5 V/
1 А /5V/
Full charge time8 h12 h
Features
Bundled cables (adapters)
microUSB
microUSB
Features
solar charging
solar charging
Solar panel power
100 mAh /10 H/
General
Body materialplasticplastic
Dimensions130x78x18 mm163х88х21 mm
Weight164 g243 g
Color
Added to E-Catalogjanuary 2018may 2016

Battery capacity

The higher the battery capacity, the more energy the power bank is able to accumulate and then transfer when charging to gadgets connected to it. But it should be borne in mind that not all of the accumulated energy goes specifically to charging – part of it is spent on service functions and inevitable losses in the process of transmission. So in the specifications, the real capacity of the power bank is also often specified. If there is no data on real capacity, then when calculating it is worth proceeding from the fact that it is usually somewhere 1.6 times lower than the nominal one. For example, for a model with a nominal capacity of 10,000 mAh, the actual value will be approximately 6300 mAh.

As for the specific values of the nominal capacity, then in models with the lowest performance it is 5000 – 7000 mAh and even less ; such power banks are suitable as a backup source of energy for 1 – 2 smartphone charging with a not very capacious battery or other similar gadget. The 10,000 mAh solutions are the most popular nowadays – in many cases, this option provides the best price-capacity ratio. The 20,000 mAh and 30,000 mAh options are also very common. But even a capacity of 40,000 mAh or more, thanks to the development of modern...technology, is quite common.

Full charge time

The time required to fully charge a battery discharged “to zero”. Features of the charging process in different models may be different, respectively, and the time required for this may differ markedly even with the same capacity.

Fast-charging batteries tend to be more expensive. Therefore, choosing this option makes sense if you do not have much time to replenish your energy supply — for example, for hiking. However, keep in mind that charging at full speed may require a charger that supports certain fast charging technologies (see below).

It must also be said that in most modern batteries, the charging speed is uneven — it is highest at the several first percent from zero, then gradually decreases. Therefore, the time required to replenish the energy supply by a certain percentage will not be strictly proportional to the total claimed charge time; moreover, this time will depend on how much the battery is already charged at the time the procedure starts. For example, charging from 0 to 50% will take less time than from 50 to 100%, although both there and there we are talking about half the capacity.

Solar panel power

Panel with photocells to generate electricity under the influence of sunlight. Through its surface, you can recharge the power bank during the daytime, whether it is far from civilization or when there is no available outlet at hand. Common solar panels include monocrystalline, polycrystalline and film. The former have the highest efficiency, the latter have relatively low efficiency. However, the competitive advantage of film panels is flexibility and light weight. The power at solar surfaces is usually small, which is due to their relatively small area.
Power Plant PP-LA9263 often compared
Power Plant PB-LA9267 often compared