USA
Catalog   /   Tools & Gardening   /   Hand Tools   /   Tool Kits

Comparison Makita D-37194 vs Bosch 2607019330

Add to comparison
Makita D-37194
Bosch 2607019330
Makita D-37194Bosch 2607019330
from $269.89 
Outdated Product
from $68.40 up to $72.04
Outdated Product
TOP sellers
Main
33 drills. 124 different size bits. Crowns on wood. Flashlight. Level. Roulette, cutters. Long nose pliers. Flexible extension.
Total number of items200100
Heads and bits
Socket heads (6 points)188
Socket heads sizes (6 points)5 — 13 mm5 — 13 mm
Bits12440
Adapter12
Bit holder11
Drills3335
Screwdriver handle1
/reversible/
Extension
flexible /1/
Wrenches
Adjustable wrench
Hex wrenches1
General accessories
Pliers1
Wire cutters1
Knife
Special tools
Countersink cutter11
Punch
More features
Level
Tape measure
Torch
Also in kit
drilling depth stop (4 pcs), diameter template /chuck holder/
diameter template, tsifenbor (4 pcs), depth gauges (4 pcs)
Tool storageplastic caseplastic case
Dimensions372x105x343 mm340x70x369 mm
Weight6.2 kg2.73 kg
Added to E-Catalogjune 2015january 2015

Total number of items

The total number of core items included in the set.

In this case, the main items are all devices that are directly used during work: non-separable tools (traditional wrenches, hammers, pliers ...), elements of collapsible tools (for example, a ratchet for removable heads and 5 such heads will be considered 6 units) , as well as accessories (such as extensions or universal joints). Additional accessories — such as lights — may or may not be included in this count, depending on the manufacturer; however, there are usually few such accessories, and they do not fundamentally affect the total number of items.

The most modest modern tool kits include up to 25 units. However, such kits are very popular — they are inexpensive and at the same time can be very versatile. 25 – 50 items is still quite a small number, 50 – 75 pcs can be called an average, 76 – 100 items are more than average, and the most extensive modern sets can include 100 – 150 items or even more.

The general rules for choosing this parameter are obvious: a more extensive set, usually, is more multifunctional, but more expensive, weighs more and takes up more space. It is also worth bearing in mind that with a similar number of items, the specific assortment of these items in differ...ent sets may be different; so when choosing, it is worth specifying not only the number of tools, but also their specific composition.

Socket heads (6 points)

Number of hex sockets included in the tool kit.

All end heads are accessories for a collapsible tool; during operation, they are mounted on a ratchet, wrench or other similar device. The head itself has the appearance of a characteristic “cap”, which, during operation, is put on a bolt, nut, etc. This design, among other things, allows you to work with parts located in recesses and some other hard-to-reach places that cannot be reached with open-ended, captive or split keys. And compared to a set of classic socket wrenches, the holder plus socket set takes up much less space, providing almost the same functionality.

As for the 6 faces, this type of socket head is the most famous and widespread, because. most modern nuts and bolts have this shape.

Bits

The number of bits supplied with the tool kit. A bat in this case is called a working nozzle, which plays the role of a screwdriver tip; in fact, they are most often used with screwdriver handles (see above).

Many types of splines (slots) are used in modern fasteners — starting with the well-known straight, cross-shaped ( Phillips and Pozidriv), Torx sprockets and ending with exotics like Torq-set (a cross with lines shifted from the centre), Pentalobe (with five ledges), etc. .P. In addition, the size of the slots can also vary, and in many cases, tool matching in size is very important. Accordingly, the more bits supplied with the set, the more versatile it is, the higher the probability that it will contain a nozzle of the desired type and size. However, the specific list of bits in the kit also does not hurt to clarify — in order to make sure that it has all the varieties you need. In the characteristics of individual sets, these data are given in the paragraph "Bit sizes" (see below).

Adapter

An adapter for docking seemingly incompatible elements from a set. For example, socket heads with an unsuitable landing square on a ratchet, screwdriver handle or in a drill driver. The adapter provides full-fledged work with all the required list of tools from the set.

Drills

The number of drills supplied in the kit. Note that some modern kits include only the overhead, without any other fixtures or accessories.

Modern drills can differ both in diameter and in purpose (for wood, metal, concrete, etc.), as well as in the type of shank. As with other bits, more drills mean more options, but the specific set of options can vary, so it doesn't hurt to check them out.

It is also worth noting that, unlike most of the working nozzles described above, drills are not designed for use with hand tools — except with rotaries, which are extremely rare today. Therefore, it is worth paying attention to sets equipped with such accessories only if the farm has a drill or rotary hammer (or if such a tool is planned to be purchased in the future). And many sets with numerous drills are initially created precisely as an addition to electric or pneumatic tools.

Extension

The type of extension included with the tool kit.

Extensions refer to "intermediate" devices, if necessary, installed between the main tool (like a screwdriver handle, see above) and the working nozzle. As the name implies, they allow you to increase the length of the working part of the tool — for example, to get to hard-to-reach places. Here are the main options for such devices:


Hard. Rigid rod extension. It does not give such freedom of action and the ability to get to hard-to-reach places as flexible (see below), but it is considered more reliable, allows you to develop great efforts (often the same as when working without an extension cord) and even allows the use as an improvised lever. Some rigid extensions may also have a crank function (see above).

Flexible. An extension in the form of a flexible tube, usually made of a metal spiral. Such an extension, like a universal joint (see above), allows you to position the nozzle at an angle to the axis of rotation of the main tool — while the range of such angles is much wider (in some cases they can reach 180 °), and the long length and high mobility of the device are even more expands freedom of action. The disadvantage of flexible extensions is less suitability for work with greater efforts than the rigid ones described above.

— Rigid/flexible. This option is indicated for sets equipped with both types of...extensions described above. This makes it possible to choose an option depending on the specific situation.

If there are several extensions of the same type in the kit, they, usually, differ in the size of the attachment (see "Landing square").

Adjustable wrench

Adjustable wrenches are all types of wrenches in which the distance between the jaws (that is, the working size) can be changed at the request of the user. The most famous type of such a tool is open-end wrenches (see above), in which one sponge is made movable and moves using a characteristic worm mechanism; colloquially, they are sometimes referred to as plumbing. Also referred to as adjustable are the so-called gas or pipe wrenches. Their jaws are located at an angle to the handle, and the mechanism is designed in such a way that the key not only adheres to the fastener, but also compresses it. Both varieties are quite common, so before purchasing a set of tools with an adjustable wrench, it would be useful to clarify the type of this wrench.

Note that the range of adjustment of such tools is quite extensive. In one fixture, it may well cover almost all sizes of fasteners found both in everyday life and in many areas of professional use (with the exception of perhaps the smallest or largest — but other tools can be provided for them). Therefore, usually, it does not make sense to include more than one wrench in the delivery set.

Hex wrenches

The number of hex wrenches supplied in the kit. Note that some modern kits include only hex wrenches, without any other fixtures or accessories. It is also worth emphasizing that in this case we are talking about the simplest hex wrenches. Imbus tools — similar in purpose, but different in design — are highlighted in our catalog in a separate category (see below),

Keys of this type usually have the form of L-shaped handles made of a hexagonal rod. Thus, the user can work with both the short and long side of the key; in the first case, the long part of the letter "G" works as a lever, providing a good effort, in the second — it plays the role of an extension. And such tools are used for bolts and other similar parts with a hexagonal cut in the cap. Such splines have a number of advantages over the classic straight and cross splines (in particular, better tolerating high torques), which makes them quite popular — in particular, in bicycles.

As for the quantity, it is worth considering here: sets with the same number of keys of the same type may differ in the specific sizes of these tools. Such nuances should be clarified before buying separately.

Pliers

Number of pliers supplied in the kit.

Initially, pliers are a device for holding, manipulating and squeezing various parts, having two handles and two characteristic flat jaws (hence the name). However, in the case of tool sets, this term often means a more functional device — pliers. Modern pliers, in addition to the flat part, have the following equipment:

— one or two recesses on the jaws, allowing you to capture pipes and other round / polyhedral parts;
— a pair of blades that allows you to use the tool as wire cutters;
— devices for cutting wire from the outside of the jaws (usually on both sides).

In most modern tool kits, only one pliers are provided, and, usually, these are pliers — thanks to the extensive capabilities of such products, such equipment is most often quite sufficient. However, there are also exceptions to this rule. In such cases, additional pliers can be both smaller pliers and other types of tools; this point should be clarified separately, and the options may be as follows:

— actually pliers of a traditional design, without additional equipment;
— thin-nosed pliers with long, elongated jaws, well suited for delicate work;
— round-nose pliers — with round-shaped jaws, used, in particular, for bending wire and other parts.
Makita D-37194 often compared
Bosch 2607019330 often compared