Comparison Sony Extra Bass SRS-XB10 vs Sony SRS-X11

— Bluetooth. Wireless technology for transmitting sound from mobile phones, tablets, etc. Allows you to connect a device wirelessly at a short distance from the signal source. The quality and overall capabilities of Bluetooth vary depending on the version:

Bluetooth 4. Each version brings improvements relative to the previous one. So in version 4.0, three standards were actually combined: traditional Bluetooth, a high-speed channel and an energy-saving mode for small amounts of data. This allowed us to optimize channel usage and battery consumption. In version 4.1. Noise immunity has been enhanced when working near 4G LTE modules. And version 4.2 introduced mainly general improvements in speed and security.

Bluetooth 5.0. One of the most important innovations of the Bluetooth 5.0 standard is the expansion of the capabilities of the BLE (Bluetooth Low Energy) mode: if necessary, the device can increase the range by reducing the speed, or speed up transmission by reducing the range. In addition, a number of improvements have been introduced regarding simultaneous work with multiple connected devices.

- Bluetooth 5.1. A significant upgrade in version 5.1 was the ability to accurately position the signal transmitter (receiver). If previous versions could only determine distance, then version 5.1 can also determine d...irection. Thus, navigation began to function better and more accurately, which improved work with the smart home system, searching for connected devices, etc. In addition to this, the improvements again concerned saving energy consumption and simultaneous work with several connected devices.

- Bluetooth 5.2. The next update, after 5.1, is Bluetooth 5th generation. The main innovations in this version are a number of security improvements, additional optimization of power consumption in LE mode and a new audio signal format for synchronizing parallel playback on multiple devices.

— Bluetooth 5.3 The Bluetooth v 5.3 wireless communication protocol was introduced at the dawn of 2022. Among the innovations in it, they accelerated the process of negotiating a communication channel between the controller and the device, implemented the function of quickly switching between the operating state in a low duty cycle and a high-speed mode, and improved the throughput and stability of the connection by reducing susceptibility to interference. When unexpected interference occurs in Low Energy mode, the procedure for selecting a communication channel to switch from now on has been accelerated. There are no fundamental innovations in protocol 5.3, but a number of qualitative improvements are evident in it.

- Bluetooth 5.4. The version was presented at the beginning of 2023, the range and data exchange speed were increased. Also in Bluetooth v 5.4, the energy-saving BLE mode has been improved. This protocol uses new security features to protect data from unauthorized access, has increased connection reliability by selecting the best channel for communication, and prevents connection losses due to interference.

—Mini-Jack (3.5 mm). Standard Aux audio input for connecting speakers to an audio source, such as a laptop or smartphone.

- USB. The presence of a USB connector allows you to connect a flash drive, mobile phones, MP3 players and other similar peripherals to the portable speakers. Accordingly, such models have a built-in player and allow you to use connected gadgets exclusively as a drive.

- Card reader. Like the USB described above, this item implies the presence of a built-in player in the acoustics. And the card reader allows you to use memory cards as a drive on which songs will be recorded.

— FM receiver. A built-in tuner allows the speaker system to work as a full-fledged FM radio receiver - this is the range that is popular among music radio stations (in particular, due to the ability to broadcast sound in stereo format).

The total power of all channels of the speaker system. The higher the power, the larger the size of the room in which the audio system can be used, however, more powerful portable speakers usually have larger dimensions and weight.

The model supports the ability to synchronize the operation of several speakers connected to one signal source. This solution allows you to realize truly stereo sound, improve the quality and power of sound reproduction, and also expand the stereo panorama. The only thing is that both speakers must support the appropriate connection type. Different brands may have their own technologies for combining speakers (JBL Connect, JBL PartyBoost, Sony Party Chain), or maybe a universal TWS.

Initially, sound transmission via Bluetooth provides a rather strong signal compression, which can greatly spoil the impression when listening to music. To eliminate this shortcoming, various technologies are used (the most popular of which is the aptX codec). Of course, to use any of the technologies, it must be supported not only by acoustics, but also by the Bluetooth device with which it is used.

— aptX. A Bluetooth codec designed to greatly improve the quality of Bluetooth audio. According to the creators, it allows you to achieve quality comparable to Audio CD (16-bit/44.1kHz). The benefits of aptX are most noticeable when listening to high-quality content, but even on regular MP3 it can provide a noticeable improvement in sound.

aptX HD. This codec is a further development and improvement of the original aptX technology, which allows you to transmit sound in even higher quality — Hi-Res (24-bit / 48kHz). According to the creators, this standard allows you to achieve signal quality that is superior to AudioCD, and sound purity comparable to wired communication. The latter is often questioned, but it can be argued that, in general, aptX HD provides very high sound quality. On the other hand, all the advantages of this technology become noticeable only on Hi-Res audio — with a quality of 24-bit / 48kHz or higher; otherwise, the quality is limited not so much by the characteristics of the connection as by the propert...ies of the source files.

aptX Low Latency. A specific variation of the aptX described above, designed not so much to improve sound quality, but to reduce delays in signal transmission. Such delays inevitably occur when working via Bluetooth; they are not critical for listening to music, however, when watching videos or playing games, there may be a noticeable out of sync between the image and sound. The aptX LL codec eliminates this phenomenon by reducing latency to 32ms, a difference that is imperceptible to human perception (although it is still too high for serious tasks like studio work with sound).

— AAC. A codec used primarily in Apple portable technology to improve Bluetooth audio. In this sense, it is similar to aptX (see relevant paragraphs), but noticeably inferior to it in terms of capabilities: if the sound of aptX is compared with Audio CD, then AAC is at the level of a medium-quality MP3 file. However, this is quite enough for listening to the same MP3s, the difference becomes noticeable only on more advanced formats.

— LDAC. Sony proprietary Bluetooth codec. In terms of bandwidth and potential sound quality, it surpasses even aptX HD, providing performance at the Hi-Res level of 24-bit / 96kHz sound; there is even an opinion that this is the maximum quality that it makes sense to provide in wireless headphones — further improvement will simply be imperceptible to the human ear.

- LCD display. Such a screen makes device management more intuitive: it can display the operating mode, equalizer settings, battery level, etc.

- Handle / strap. The presence of a handle or strap makes wearing the speaker more comfortable. So the handle is used mainly in large stereo speakers and makes them look like boomboxes ( radio tape recorders) of yesteryear. The strap can be used both for large speakers and for miniature ones, which allows you to hang them on your hand, on elements of a backpack, etc.

- Flashlight. Such a function most likely will not replace a high-end specialized flashlight. The power of the built-in flashlight is usually enough to illuminate at least a distance of 2 - 3 meters, and models with a bike mount (see above) can even play the role of a headlight (although, again, they are inferior to specialized bicycle lights).

— Carabiner A latch-like device that allows you to attach the speaker to items of clothing, backpack straps, etc.

- Bike mount. A special device designed to fix the column on a bicycle - usually on the handlebars, at the user's fingertips. Such models are often complemented by a speakerphone function that allows you to talk on the phone without taking your hands off the steering wheel.

Operating time of a portable audio system without connecting to an external power source (network or USB port, depending on the capabilities). Note that manufacturers tend to indicate battery life in their specifications under optimal conditions for energy saving: at low volume, without using additional functions, etc. Therefore, in fact, this indicator may be noticeably lower than the claimed one, and speakers with a long operating time will not sound at full volume for the specified hours.

The presence in the design of the acoustics of a protected housing that prevents dust and moisture from entering the sensitive electronic filling. The specific degree of such protection in different models may be different — some speakers are able to endure even complete immersion under water ( waterproof), others are designed only for exposure to moderate rain. Therefore, the specifics of the protected case should be clarified separately according to the manufacturer's official data. However, anyway, such speakers will be more resistant to bad weather and better suited for outdoor use than those that do not have dust and water protection; therefore, if you are choosing acoustics for outdoor trips, it makes sense to pay attention to models with this function.

Some models with this feature are officially IP certified. The IP index includes two digits — for example, IP54. The first digit indicates the degree of protection against dust, the second — from moisture; the higher the number, the higher the corresponding degree of protection, detailed data can be found in special sources.