Comparison Wacom Intuos Pro Large 2013 vs Wacom Intuos4 XL

The paper size that corresponds to the size of the tablet's active surface.

This parameter is specified only for traditional tablets and smart-notebooks (see "Type"). At the same time, the specific size of the device does not always strictly correspond to the specified format. For example, an A4 tablet can be either a little larger or a little smaller than a standard landscape sheet of 210x297 mm. Nevertheless, according to the specified format, one can easily estimate the dimensions of the tablet as a whole and its general “weight category”.

Nowadays, on the market you can find devices in formats from A3 to A7, and the most popular options are the A4 mentioned above, as well as A5(148x210 mm) and A6(105x148 mm). In general, larger tablets are easier to use, but also more expensive.

The exact size of the active area of a tablet (or screen in a graphic display) in width and height. In general, it is more of a reference than a practically significant parameter: when choosing a traditional graphics tablet, there is often enough information about the format (see above), and for displays, primarily the diagonal (see above) and aspect ratio (see below) are of practical importance . However, the exact dimensions can also be useful in fact: for example, you can determine the aspect ratio from them (for classic tablets, this parameter is often not indicated).

The aspect ratio of the tablet working area (width to height). This parameter allows you to evaluate the overall proportions of the device: for example, the ratio of 4:3 gives an almost square shape of the work area, and in 16:9 models it is noticeably elongated in width.

Actually, "widescreen" aspect ratios — 16:9 and 16:10 — are now much more common than the classic 4:3. The 3:2 standard is also rare, although it is actually also a widescreen. This situation is due to the fact that, ideally, the aspect ratio of the monitor and tablet should be the same (otherwise, there may be a mismatch in the movement of the pen and the cursor on the screen, or part of the screen or tablet area will be unused). And the most popular nowadays are just monitors in 16:9 and 16:10 formats, the 4:3 standard is much less common, and 3:2 is extremely rare.

A touch-sensitive surface, usually located along one of the edges of the front panel of the tablet case. The touch strip provides additional controls such as scrolling, zooming, canvas rotation, and other gestures that can be customized to perform different tasks. Thus, the strip can often be reprogrammed for certain actions, be it quickly switching between tools in a graphic editor or changing brush parameters.

Regular way to connect a tablet to a computer.

— Wired. Wired connection, usually via a USB port. This method is not very convenient: the wire limits the maximum distance from the tablet to the PC, and sometimes it has to be pulled to hard-to-reach places (for example, if the system unit is installed under the table with ports to the wall, and there are no available connectors on the front panel). On the other hand, in most cases, these inconveniences are not critical, and the wired tablets themselves are not as expensive as wireless ones, and besides, they do not require their own power supply.

— Wireless. Wireless connection can be carried out in two main ways — either via technology or via a dedicated radio channel. The first option is convenient because the tablet can be connected to any computer with Bluetooth — for example, a laptop or monoblock — without the use of special adapters; however, if there is no Bluetooth module in the computer, you will still need an adapter, and you will have to buy it separately. Models connected via radio, by definition, are equipped with an adapter and work only through it. Anyway, wireless tablets are more convenient than wired ones: the communication range usually reaches several metres, which allows you to freely move away from the comp...uter (for example, draw in your favorite chair, holding the tablet on your lap). On the other hand, these devices are significantly more expensive, require their own power supplies, and have limited battery life.

— Wired/wireless. Models that support both of the connection options described above. Thus, they combine the advantages and partly compensate for the shortcomings of wired and wireless models. So, when the user is sitting right at the computer, the tablet can be connected with a wire and save battery power, and if freedom of movement is needed, the device can be disconnected and use a wireless connection. However, these models are not cheap.

- microUSB. A smaller version of the USB connector designed for portable devices. Currently it is losing ground to the USB type C interface with a more convenient symmetrical contact group.

- miniUSB. Almost the same interface as described above, which differs only in the size and shape of the connector.

— USB A. Standard (full-size) USB connector used to connect the device to a computer and other external devices.

— USB C. A miniature version of the USB connector, gaining popularity and in the future capable of displacing microUSB. The interface has a high data transfer rate, and most importantly, it is symmetrical, so the plug can be connected to either side.

- Branded. A connection connector that does not belong to generally accepted standards and is used to a limited extent - in models of one or several manufacturers. However, due to general standardization, this option has practically disappeared from the scene.

The ability to work on a graphics tablet with your fingers — just like on the touch screen of a smartphone or tablet PC. Touch input can be useful both during "non-working" hours (for example, if the tablet is used as a touchpad for a PC), and when drawing, to implement some specific techniques. At the same time, note that the accuracy of typing with a finger is much lower than when using a pen.

The height within which pen movements above the working surface are recorded by the tablet electronics even in the absence of direct contact.

Many tablets allow you to work in a "non-contact" way — without directly touching the stylus to the work surface. Thanks to this, it is possible, for example, with a raised pen to bring the cursor in the graphics editor to the desired point and turn on the drawing mode by touching the tablet with the stylus. And the greater the maximum reading height, the more convenient it is to use this mode, the less demanding the tablet is for the accuracy of movements. In many modern models, this parameter exceeds 10 mm.

The resolution of the graphics tablet's working area, expressed in lines per inch (lpi). The parameter includes the density of sensors on the tactile surface of the device per inch. It is these sensors that recognize the signal upon contact with the pen. The higher the resolution, the more accurately and in detail the movements of the pen across the working area of the tablet are transferred. This ensures the creation of objects with a high degree of detail.

The simplest devices are characterized by an indicator of 2540 lpi. The “golden mean” is 4000 lpi. And in professional graphics tablets the a resolution of 5080 lpi can be found. Moreover, it is important to take into account that higher accuracy significantly affects the cost of the device.