Comparison Apple iMac 27" 5K 2017 MNEA2 vs Asus Vivo AiO V230IC V230ICGK-BC273X

Diagonal of the screen installed in a monoblock (see "Type").

In general, the larger the diagonal, the more advanced both the screen and the computer as a whole are considered. The large display size is convenient for games, movies, and some special tasks like layout of large printed materials; in addition, a higher resolution can be provided for such a screen, and more space is available inside the case for advanced components. On the other hand, a larger monoblock will cost much more than a relatively small one, even if the other characteristics of such models are completely the same. In addition, the power of the hardware is not directly related to the size of the screen — high-end monoblocks can be quite small.

As for specific numbers, a diagonal of 20" or less is considered very limited nowadays, monoblocks of 21.5" are small, a 24" screen is medium, and values of 27" and 32" indicate large sizes.

Resolution of the screen installed in the monoblock (see "Type").

The higher the resolution, the clearer and more detailed image the screen can produce, but the more expensive it is. In addition, high resolutions require corresponding powerful graphics, which further affects the price of the entire computer. The minimum indicator for modern monoblocks is actually 1366x768 — this resolution allows, in particular, to play HD 720p video in proper quality. However, nowadays, the more advanced format is most widely used — Full HD, providing a resolution of 1920x1080. And in high-end monoblocks with a large diagonal and powerful graphics, there are also more solid resolutions — Quad HD(2560x1440, 3440x1440), Ultra HD 4K(3840x2160, 4096x2304) and even 5K(5120x2880) standards.

Type of own screen cover in monoblock (see "Type").

— Glossy. The most common type of coating in modern PCs. Such a surface (with the same characteristics of the matrix) noticeably surpasses the matte one in terms of brightness and colour saturation in the visible image. The main disadvantage of gloss is the tendency to glare in bright ambient light; however, all-in-one PCs are not often used in such conditions, and this phenomenon can be compensated by increasing the brightness of the backlight. With all this, this type of coverage is quite inexpensive.

— Glossy (anti-glare). A modified version of the glossy finish (see above) that, as the name suggests, is more resistant to glare. At the same time, in terms of picture quality, such screens are usually not inferior to classic gloss. On the other hand, the anti-reflective surface is somewhat more expensive, and its advantages in this case are not often really significant. Therefore, screens with such a coating are found in modern monoblocks much less often than glossy ones.

— Matte. The key advantages of a matte finish are its low cost and the almost complete absence of glare, even in bright ambient light. On the other hand, the image on such a screen is dimmer than on glossy displays (including anti-glare) with similar matrix characteristics. Therefore, this type of coating is rarely used...nowadays — mainly in relatively inexpensive household and business models, for which a bright picture with saturated colours is not fundamental.

The maximum brightness provided by the monoblock screen (see "Type").

The more intense the ambient light, the higher the screen brightness should be for normal visibility. The most "dim" screens in monoblocks are capable of delivering up to 200 cd / m2 — this is more than enough to work under ordinary artificial lighting, but under sunlight it will take at least 300 cd / m2. At the same time, modern monoblocks can also have a larger margin of brightness — in some models up to 500 cd / m2. This expands the possibilities for customizing the screen for different situations and user preferences. In addition, high brightness has a positive effect on image quality and colour saturation, in light of which it is often a sign of a fairly advanced screen.

The model of the chipset used in the standard configuration of the PC.

A chipset can be described as a set of chips that provides the combined operation of the central processor, RAM, I / O devices, etc. It is this chipset that underlies any motherboard. Knowing the chipset model, you can find and evaluate its detailed characteristics; most users do not need such information, but for specialists it can be very useful.

The main manufacturers of processors nowadays are Intel and AMD, also in 2020, Apple introduced its M1 series CPUs (with further development as M1 Max and M1 Ultra), later showing the next generation M2(M2 Pro, M2 Max, M2 Ultra). The list of current Intel series includes Atom, Celeron, Pentium, Core i3, Core i5, Core i7, Core i9, Core Ultra 9 and Xeon. For AMD, in turn, this list looks like this: AMD Athlon, AMD FX, Ryzen 3, Ryzen 5, Ryzen 7, Ryzen 9 and Ryzen Threadripper.

In general, each series includes processors of different generations, similar in general level and positioning. Here is a more detailed description of each of the options described above:

— Atom. Processors originally designed for mobile devices. Accordingly, they are distinguished by compactness, high energy efficiency and low heat dissipation, but they “do not shine” with performance. Perfect for microcomputers (see "Type"), among the more "large-format" systems are extremely rare — mostly in the most modest configurations.

— Celeron. Low-cost-level processors, the most simple and inexpensive consumer-level desktop chips from Intel, with the appropriate characteristics.

— Pentium. A family of low-cost desktop processors from Intel that is slightly more advanced than Celeron, but inferior to models from the Core i* series.

— Core i3. The simplest and most inexpensive series of desktop Core chips from Intel includes chips of the low-cost and inexpensive middle class, which, nevertheless, surpass Celerons and Pentiums in terms of performance.

— Core i5. Medium-level family among Intel Core processors; and in general, the chips of this series can be attributed to the average level by the standards of desktop systems.

— Core i7. A series of high-performance processors that has long been the top among Core chips; only in 2017 did it lose this position to the i9 family. However, the presence of an i7 processor still means a fairly powerful and advanced configuration; in particular, such CPUs are found in premium-level monoblocks, and are also quite popular in gaming systems.

— Core i9. The top series among Core processors, the most powerful among general purpose Intel desktop chips. In particular, the number of cores even in the most modest models is at least 6. Such chips are used mainly in gaming PCs.

— Xeon. High-end Intel processors, the capabilities of which go beyond the standard desktop chips. Designed for specialized applications, among PCs they are found mainly in powerful workstations.

— AMD FX. A family of processors from AMD, positioned as high-performance and at the same time inexpensive solutions, including for gaming systems. Interestingly, some models come standard with liquid cooling.

— Ryzen 3. AMD Ryzen chips (all series) are promoted as high-end solutions for gamers, developers, graphic designers and video editors. It was among these chips that AMD pioneered the Zen microarchitecture, which introduced simultaneous multithreading, which made it possible to significantly increase the number of operations per clock at the same clock frequency. And Ryzen 3 is the most inexpensive and modest family among the "ryzens" in terms of characteristics. Such processors are produced using the same technologies as the older series, however, half of the computing cores are deactivated in Ryzen 3. Nevertheless, this line includes quite performant models, designed, among other things, for gaming configurations and workstations.

— Ryzen 5. A family related to the middle level among Ryzen processors. The second series on this architecture, released in April 2017 as a more affordable alternative to Ryzen 7 chips. Ryzen 5 chips have slightly more modest performance characteristics (in particular, lower clock speeds and, in some models, L3 cache size). Otherwise, they are completely similar to the "sevens" and are also positioned as high-performance chips for gaming and workstations.

— Ryzen 7. Historically the first series of AMD processors based on the Zen microarchitecture (for more details, see "Ryzen 3" above). One of the older families among the "ryzens", in terms of performance it is second only to the Threadripper line; many PCs based on these chips are gaming.

— Ryzen Threadripper. Specialized Hi-End processors designed for maximum performance. They are mainly installed in gaming systems and workstations.

— Apple M1. A series of processors from Apple introduced in November 2020. They belong to mobile solutions (see "Type" above), are performed according to the system-on-chip scheme: a single module combines a CPU, a graphics adapter, RAM (in the first models — 8 or 16 GB), an NVMe solid-state drive and some other components (specifically Thunderbolt 4 controllers). Accordingly, among PCs, the main scope of such chips are compact nettops. As for the characteristics, in the initial configurations, the M1 processors are equipped with 8 cores — 4 performant and 4 economical; the latter, according to the creators, consume 10 times less energy than the former. This, combined with the 5nm process technology, has made it possible to achieve very high energy efficiency and at the same time performance.

— Apple M1 Max. An uncompromisingly powerful SoC with a focus on maximizing Apple desktop productivity for complex tasks. The Apple M1 Max line was introduced in the fall of 2021, it debuted on board Mac Studio computers.

Apple M1 Max consists of 10 cores: 8 of them are productive, and 2 more are energy efficient. The maximum amount of built-in combined memory reaches 64 GB, the “ceiling” of its bandwidth is 400 GB / s. The graphics performance of the Max version of the M1 single-chip system is about twice that of the Apple M1 Pro. The chip contains over 57 billion transistors. An additional accelerator for the professional ProRes video codec has also been introduced into its design, which allows you to easily play multiple streams of high-quality ProRes video in 4K and 8K frame resolutions.

— Apple M1 Ultra. Formally, the M1 Ultra chip consists of two Apple M1 Max processors on a single UltraFusion substrate, which allows information transfer at speeds up to 2.5 Tbps. In the language of "dry" numbers, this bundle consists of 20 ARM computing cores (16 high-performance and 4 energy efficient), a 64-core graphics subsystem and a 32-core neural computing unit. The system-on-chip supports up to 128 GB of combined memory. About 114 billion transistors are packed into the processor package. The main purpose of the Apple M1 Ultra is to confidently work with complex resource-intensive applications in the manner of processing 8K video or 3D rendering. In life, the processor can be found on board Mac Studio desktop computers.

In addition to the series described above, in modern PCs you can find the following processors:

— AMD Fusion A4.... The entire Fusion processor family was originally created as integrated graphics devices, combining a central processing unit and a graphics card in one chip; such chips are called APU — Accelerated Processing Unit. Series with the index "A" are equipped with the most powerful integrated graphics in the family, which in some cases can compete on equal terms with inexpensive discrete video cards. The higher the number in the series index, the more advanced it is; A4 is the most modest series among Fusion A.

— AMD Fusion A6. A series of processors from the Fusion A line, relatively modest, but somewhat more advanced than the A4. For common features of all Fusion A, see "AMD Fusion A4" above.

— AMD Fusion A8. A rather advanced series of Fusion A processors, the middle option between the relatively modest A4 and A6 and the high-end A10 and A12. For common features of all Fusion A, see "AMD Fusion A4" above.

— AMD Fusion A9. Another advanced series from the Fusion A family, slightly inferior only to the A10 and A12 series. For common features of all Fusion A, see "AMD Fusion A4" above.

— AMD Fusion A10. One of the top series in the Fusion A line. See "AMD Fusion A4" above for general features of this line.

— AMD Fusion A12. The top series in the APU Fusion A line, introduced in 2015; positioned as professional-level processors with advanced (even by APU standards) graphics capabilities. For general features of the Fusion A range, see "AMD Fusion A4" above.

— AMD E-series. This series of processors belongs to the APU, like the Fusion A described above, however, it is fundamentally different in specialization: the main scope of the E-Series are compact devices, in the case of PCs, mostly nettops (see "Type"). Accordingly, these processors have compactness, low heat dissipation and power consumption, but their computing power is also low.

— Athlon X4. A series of low-cost consumer-level processors, originally released in 2015 as relatively inexpensive and at the same time relatively performant solutions for the FM + socket.

— AMD G. A family of ultra-compact and energy-efficient processors from AMD, made on the principle of "system on a chip" (SoC). Unlike many similar chips, it uses the x86 architecture, not ARM. Positioned as a solution for devices with an emphasis on graphics, in particular, gaming. However, we are not talking about gaming PCs: like most processors of a similar "weight category", AMD G is found mainly in thin clients (see "Type").

— VIA. Processors from the company of the same name, mainly related to energy-efficient "mobile" solutions — in particular, many VIA models are directly compared with Intel Atom. However, despite the modest performance, such CPUs are found even among desktop systems; and in the future, the company plans to create full-fledged desktop chips, competing with AMD and Intel.

— ARM Cortex-A. A group of processors from ARM, the creator of the microarchitecture of the same name and the largest manufacturer of chips based on it. A feature of this microarchitecture compared to the classic x86 is the so-called reduced instruction set (RISC): The processor operates with a simplified instruction set. This somewhat limits the functionality, but allows you to create more compact, "cold" and at the same time performant chips. For a number of reasons, the ARM architecture is mainly used in "mobile" processors designed for smartphones, tablets, etc. This is also true for the ARM Cortex-A series; in PCs, such CPUs are rarely installed, and usually we are talking about a compact, modest device like a “thin client” (see “Type”).

— Nvidia Tegra. Initially, these processors were created for portable devices, but recently they have also been installed in PCs, mainly in monoblocks. They are "system-on-chip" devices that do not use the "desktop" x86 architecture, but the "mobile" ARM architecture, which requires the use of appropriate operating systems; the most commonly used is Android (see "Preinstalled OS").

— Armada. Another type of ARM architecture processors, positioned as high-performance solutions for cloud computing and home servers, including NAS. It is found in single models of "thin clients" (see "Type").

— Tera. A specialized family of processors designed specifically for "thin clients" (see "Type") and fundamentally different from classic CPUs (both full-size and compact). Tera-based systems are usually full-fledged "zero clients" (zero client), absolutely not capable of autonomous operation. In other words, these are devices designed to create a "virtual desktop": the user works with the interface and terminal equipment (monitor, keyboard, mouse, etc.), but all operations take place on the server. This allows you to provide increased security when working with sensitive data. But in more traditional PCs, Tera processors are practically inapplicable.

Of the outdated series of processors that can still be found in use (but not for sale), we can mention the Sempron, Phenom II and Athlon II from AMD, as well as the Core 2 Quad and Core 2 Duo from Intel.

Note that on the market there are configurations that are not equipped with a processor — in the expectation that the user can pick it up on his own; however, this is a rather rare option.

The specific model of the processor installed in the PC, or rather, its index within its series (see "Processor"). The full model name consists of the series name and this index — for example, Intel Core i3 3220; knowing this name, you can find detailed information about the processor (characteristics, reviews, etc.) and determine how suitable it is for your purposes.

The number of threads supported by the bundled PC processor.

A thread in this case is a sequence of instructions executed by the kernel. Initially, each individual core is able to work with only one such sequence. However, among modern CPUs, more and more often there are models in which the number of threads is twice the number of cores. This means that the processor uses multi-threading technology, and each core works with two instruction sequences: when pauses occur in one thread, the core switches to another, and vice versa. This allows you to significantly increase performance without increasing the clock frequency and heat dissipation, however, such CPUs are also more expensive than single-threaded counterparts.

Clock speed of the CPU installed in the PC.

In theory, higher clock speeds have a positive effect on performance because they allow the CPU to perform more operations per unit of time. However, this indicator is rather weakly related to real productivity. The fact is that the actual capabilities of the CPU strongly depend on a number of other factors - the overall architecture, cache size, number of cores, support for special instructions, etc. As a result, you can compare by this indicator only chips from the same or similar series (see “CPU”), and ideally, also from the same generation. And that's pretty approximate.