Comparison Andes DC1018P vs TTN DC-1018
Add to comparison |  |  |
|---|---|---|
| Andes DC1018P | TTN DC-1018 | |
| Outdated Product | Outdated Product | |
| User reviews | ||
| TOP sellers | ||
This model is available in different capacities (8.8 Ah and 10.4 Ah). Please confirm the details with the store before ordering. | ||
| Type | low voltage UPS (router, camera) | low voltage UPS (router, camera) |
| Form factor | standard (flat) | standard (flat) |
| Full load operating time | 10 min | |
Input | ||
| Input voltage | 1 phase (230V) | 1 phase (230V) |
| Input voltage range | 85 – 265 В | 85 – 265 В |
| Bypass (direct connection) | in absent | in absent |
Output | ||
| Output voltage | DC (constant voltage) | DC (constant voltage) |
| Rated output power | 18 W | 18 W |
| USB-A for charging | 1 pcs | 1 pcs |
| PoE output (LAN) | 15 H/24 H 0.6 A | |
Battery | ||
| Total battery capacity | 8.8 Ah | 12 Ah |
| Battery type | Li-ion (lithium-ion) | Li-ion (lithium-ion) |
Protection | ||
| Protection | short circuit protection overload protection | short circuit protection overload protection |
General | ||
| Operating temperature | 0 – 45 °C | 0 – 45 °C |
| Dimensions (HxWxD) | 32x160x102 mm | 33x160x105 mm |
| Weight | 0.4 kg | 0.39 kg |
| Added to E-Catalog | october 2024 | september 2024 |
Compare Andes DC1018P and TTN DC-1018
You may be interested in
My comparisons
Andes DC1018P often compared
TTN DC-1018 often compared
Glossary
Full load operating time
UPS continuous operation time from a fully charged battery when connected to a load with a power equal to the UPS output power (maximum or effective, depending on the type of load, see the relevant paragraphs for details). For a UPS designed to work with a home or office PC, a time of about 10-15 minutes is considered sufficient, this is enough to save data and complete work. To power servers, it is worth using devices with an operating time of 20 minutes or more.
PoE output (LAN)
Availability of a LAN connector in the UPS with support for PoE (Power over Ethernet) power supply. This technology allows energy to be transmitted via an Ethernet cable to power network devices. It is possible to power such devices directly from the UPS, which ensures equipment backup in case of power supply interruptions. Such devices include IP video surveillance cameras, access points, various sensors, etc.
Total battery capacity
The capacity of the battery installed in the UPS. For models with multiple batteries, this is both the total working capacity and the capacity of each individual battery: the batteries in such devices are usually connected in series, so that their total capacity corresponds to the capacity of each individual cell.
Theoretically, a higher battery capacity means the ability to power loads of a given capacity for longer. However, in fact, this parameter is more of a reference than practically significant. The fact is that the actual amount of energy stored by the battery depends not only on the capacity in amp-hours, but also on the voltage in volts; this voltage is often not specified in the characteristics, despite the fact that for accurate calculations it must be known. So when choosing, you should focus on more "close to life" characteristics — first of all, on the directly claimed operating time in different modes (see above).
Theoretically, a higher battery capacity means the ability to power loads of a given capacity for longer. However, in fact, this parameter is more of a reference than practically significant. The fact is that the actual amount of energy stored by the battery depends not only on the capacity in amp-hours, but also on the voltage in volts; this voltage is often not specified in the characteristics, despite the fact that for accurate calculations it must be known. So when choosing, you should focus on more "close to life" characteristics — first of all, on the directly claimed operating time in different modes (see above).