Catalog   /   Automotive   /   Car Audio   /   Car Stereos

Comparison Cyclone MP-7125 vs Cyclone MP-7124

Add to comparison
Cyclone MP-7125
Cyclone MP-7124
Cyclone MP-7125Cyclone MP-7124
Outdated ProductOutdated Product
TOP sellers
Application areacarcar
DIN size2DIN2DIN
Short body
Media types
microSD
USB storage (front)
iPod/iPhone connection
Android connection
microSD
USB storage (front)
iPod/iPhone connection
Android connection
Screen
Screen size6.9 "7 "
Resolution1024x600 px800x480 px
Screen typeTFT
Touch screen
Equipment
Multimedia
Windows CE 6.0
Dashcam mode
Bluetooth
MirrorLink
Windows CE 6.0
Dashcam mode
Bluetooth
MirrorLink
Equalizer
Number of fixed settings33
Amplifier specs
Power per channel45 W45 W
Number of channels44
Control
Volume controlknob controlknob control
Control functions
remote control
steering wheel controls
remote control
steering wheel controls
Outputs
Speaker connectionISO/RCAISO/RCA
Line out22
Video output (composite)22
Subwoofer output
Inputs
AUX
Video input (composite)1
front AUX
For backup camera
More features
Tuner bandsFM/AМFM/AМ
Illumination colour selection
BacklightRGBRGB
Added to E-Catalogjune 2021february 2021
Compare Cyclone MP-7125 and MP-7124
Cyclone MP-7124 often compared
Glossary

Screen size

Diagonal display size of car radio. The larger the screen, the larger the image on it and the better, usually, information is perceived; in addition, large size is important if the screen is touch-sensitive (see Touch screen). On the other hand, in car radios, the display size is limited by mounting dimensions and almost never exceeds seven inches.

Resolution

Display size in dots (pixels) horizontally and vertically. The higher the resolution, the more detailed and smoothed the image is capable of producing the screen. High resolution is especially important for large diagonal displays; on the other hand, it significantly affects the cost of the device, and for a small screen it may even turn out to be superfluous (since the image will turn out to be too small).

Screen type

The type of screen matrix installed in the radio.

This parameter is indicated mainly in cases where the screen uses a high-end IPS type matrix. This technology provides high colour quality, good brightness and wide viewing angles, and thanks to the improvement and reduction in price, the price of IPS screens is constantly decreasing. At the same time, it makes no sense to use this technology in a small display intended only for service information; therefore, the presence of an IPS matrix usually means a rather large screen, often a touch screen (see below).

AUX

Standard input for analogue audio transmission. The presence of such a connector allows you to connect an external sound source (for example, an audio player) to the radio to play music through the car's acoustics. The specific connector type used in such an input may vary. The same goes for its location; AUX on the front panel is most convenient, this feature is indicated separately in our catalog (see below).

Video input (composite)

Number of composite video inputs provided in the design of the car stereo.

A composite video input is usually an RCA connector (commonly known as "tulip") of a characteristic yellow color. It can be used to connect any video signal source with a corresponding output, such as a portable DVD player. Note that in this case, only the input intended for video is implied; a different interface would need to be used for sound output, such as a line-in (see above). The image quality when connecting through a composite connector is relatively low, and HD resolutions are not supported. However, this is hardly a serious drawback, considering the characteristics of displays in modern car stereos (and even separately made car TVs/monitors to which the signal can be broadcast from the car stereo).

The more composite video inputs provided in the car stereo, the more signal sources can be connected to it simultaneously.