Comparison Discovery Trek AM DD 26 2024 frame 18 vs Discovery Bastion AM DD 26 2022 frame 18

The year to which the manufacturer classifies the bicycle (more precisely, the model range that includes this model).

The significance of this parameter is that the model range is updated every year, and two bicycles with the same name, but from different years, can differ significantly in characteristics and equipment. At the same time, new models ( 2024, 2025) usually cost more, and older ones ( 2022, 2023, etc.) are sold at reduced prices.

It is worth considering that a later year of manufacture in itself does not necessarily mean more advanced characteristics - manufacturers can change them in the direction of simplification. So the model of previous years may be in no way inferior to the new bike.

The age group to which the bike belongs. This parameter in our catalogue is indicated only for teenage models; if the age group is not specified, it means that the car belongs to “adults” (children’s bikes are placed in a separate section of the catalogue).

Teenager bikes are designed for teens aged about 10-14 years old, for whom children's bikes are already small, but adults are still too big. Such bicycles are similar in design to adults and differ from them mainly in slightly reduced sizes — in particular, the diameter of the wheels (see below) in them usually does not exceed 24 "(there are exceptions, but extremely rarely).

The maximum load allowed for a bicycle is, in other words, the maximum weight that it can normally carry in normal use. Of course, when calculating the load, the weight of both the cyclist himself and the additional load that he carries with him is taken into account.

The permissible load must definitely not be exceeded: even if the bike does not break down immediately, off-design loads can weaken the structure, and an accident can occur at any time. Also note that it is desirable to have a certain weight margin — at least 15 – 20 kg: this can be useful in case of transporting heavy loads and will give an additional guarantee in emergency situations (for example, when a wheel gets into a pit). Considering that the average weight of an adult is about 70 – 80 kg, bicycles with a permissible load of up to 100 kg can be classified as "lightweights", from 100 to 120 kg — to the middle category, more than 120 kg — to "heavy trucks".

The user's height recommended by the manufacturer is calculated according to several parameters. One is the wheel diameter, and the second and more important is the frame size. If everything is simple with the wheel size — it is round and always the same, then the frame size complicates the choice. Different types of bicycles have their own frame shape, so even the same size can be suitable for different heights. And this is not to mention the features of the manufacturer, who like to do everything for themselves, and not in a general manner. Therefore, the size of the frame of each bicycle has its own size and it is still better to choose a bicycle by personally “saddling” it. If this is not possible, then our point will tell you what height, according to the manufacturer, this configuration (frame + wheel) of the bike is designed for.

— Steel. Steel is distinguished by high strength and rigidity, in terms of resistance to deformation, it noticeably surpasses other alloys and is inferior only to carbon fiber. At the same time, such frames dampen vibrations well, are inexpensive, and in the event of a breakdown, they are easily repaired. On the other hand, steel is heavy, three times heavier than aluminium and twice as heavy as titanium; therefore, such frames are found mainly among inexpensive mountain and city bikes, for which a lot of weight is not critical. It is also worth considering that this material is susceptible to corrosion if the protective coating is damaged.

— Chromium molybdenum steel(Cro-Mo). An advanced variation of the steel described above. By themselves, chromium-molybdenum alloys have high strength and reliability, and frames made from them can have different wall thicknesses (depending on the load that a particular section is subjected to) — this allows you to slightly reduce weight. Thanks to this, Cro-Mo alloys are found even among fairly advanced road bikes, and they are also popular in touring models. At the same time, such frames cost much more than “ordinary” steel ones.

— Aluminium. Actually, bicycles do not use pure aluminium, but various alloys based on it. They differ somewhat in characteristics, but they have a number of common features, the main of whi...ch is low weight combined with good strength characteristics. Due to this, aluminium alloys are widely used in road bikes, as well as in touring mountain bikes (see “Intended Use”). The main disadvantage of these materials is rigidity: they absorb vibrations worse than steel, which is why they are poorly suited for models without shock absorption (see below), and with a strong impact, such a frame will break rather than bend.

— Carbon. Resin-bonded carbon fiber composite. It is used in high-end bicycles, as it is very expensive, but it is characterized by very high strength combined with low weight. Moreover, the properties of carbon fiber make it possible to increase strength not just in certain areas, but in certain directions, which contributes to even greater reliability. Note that carbon frames can be either solid (monolithic) or composite — in the latter case, individual elements are connected by metal parts, which reduces the cost, but makes the structure susceptible to corrosion. It is also worth considering that the quality of carbon in general depends on the price category of the bike, and relatively inexpensive frames can be sensitive to strong point impacts. This material is almost impossible to repair.

— Titan. A fairly advanced material that combines high strength, elasticity (which provides soft vibration damping), corrosion resistance and very low weight. However, the cost of such frames is quite high, and therefore they are used mainly in premium mountain and road bikes.

— Magnesium alloy. This material is notable primarily for its very low weight (many times lighter than aluminium), while it has good stiffness and elasticity characteristics, dampens vibrations well, and its price is relatively low. At the same time, magnesium alloys have a number of significant drawbacks. In particular, they do not tolerate impacts, especially point impacts, and are also extremely sensitive to corrosion even with minor damage to the protective coating, which is why such frames are very demanding for care and storage.

Tyre model supplied with the bike as standard. Different tyres have different purposes and characteristics; knowing the tyre model, you can clarify these points and check how they correspond to your wishes. This is especially important when choosing a machine for serious cycling.

Model of the derailleur (derailer) installed on the rear wheel cassette as standard on the bike. For more information on why you need to know the model of a particular bicycle component, see paragraph "Cassette Model".

Additional equipment supplied with the bike.

— Wings. Protective devices in the form of shields that are installed over the wheels and protect the cyclist and others from water and dirt flying from the wheels while riding. Usually, they are made removable — in case you need to minimize the weight of the car.

— Saddle with springs. A saddle equipped with springs that make it softer and provide cushioning. Note that soft spring-loaded saddles are designed mainly for a calm, leisurely ride — for high-speed bikes (including advanced road bikers), narrow hard saddles are considered more suitable.

— Shield on the chain. Protective shield covering the bicycle chain. Note that the dimensions and design of such a shield can be different: in some models it covers the entire upper section of the chain from the front to the rear sprocket, in others it protects only the front sprocket itself from the outside. Anyway, the main task of such a device is to protect the chain from foreign objects, primarily the edges of the cyclist's clothing. The shield can be made removable — in case you need to reduce weight.

— Footboard. A device in the form of a small folding pin that provides additional support. With a footrest, the bike does not need to be leaned on a pole, wall, fence, etc. — it can be placed vertically on an...y relatively flat surface. Note that many bikes without a kickstand allow you to buy and install it separately.

— Peggy. Special devices installed on the axles of "stunt" bikes — BMX or mountain bikes of the corresponding specialization (see "Application"). Pegs look like extensions of axes pointing in both directions. The standard size of one such "continuation" is 11 cm in length and 4 cm in diameter. They are used for a variety of acrobatic routines, ranging from riding on pegs to sliding on edges, railings, etc.

— Boot. A classic bike rack is a platform for carrying various cargoes, mounted above the rear wheel. It is found mainly in city bikes (see "Application"), as well as some relatively simple mountain and road models. Separately, we note that it is at least highly discouraged to carry passengers on the boot, and in many countries it is expressly prohibited by traffic rules.

— Front boot. Boot (see above), located above the front wheel. The advantage of this arrangement is that the transported luggage is constantly in front of the cyclist's eyes. On the other hand, the front rack is usually attached to the steering wheel and turns with it; thus, the additional load can significantly complicate management. Therefore, this feature is relatively rare, usually as an addition to the traditional (rear) boot; the exception is tourism models (see "Application").

— Basket on the steering wheel. A basket for transporting various goods, installed in front of the steering wheel, above the front wheel; a kind of analogue of the front boot described above. At the same time, on the one hand, the basket is more massive, on the other hand, it is better suited for transporting large items or numerous small items. In addition, the cargo on the boot needs to be additionally secured, while this is not always required for the basket.

— Signal / call. A bell or other sound signal — for example, a horn — usually mounted on the steering wheel, at the cyclist's hand. This equipment is very useful for warning other road users of an approaching bicycle. And in some countries, the presence of a sound signal is mandatory according to traffic rules.

— Lighting equipment. In this case, the presence of a headlight, a taillight, and in some cases, both at once, may be implied; specific configuration should be specified separately. Anyway, such equipment is indispensable for riding at night: it makes the cyclist visible to other road users, and the headlight also illuminates the road. In many countries, traffic rules expressly prohibit driving at night without lights.

— Bottle holder. Dedicated water bottle holder, usually mounted on the frame. It is more convenient to carry a supply of water with you on such a mount than to keep a bottle in a backpack, bag, on the boot, etc. Some bike models with this function are immediately equipped with a bottle, for others it needs to be purchased separately.

— Pump. The presence of the pump in the delivery set eliminates the need to buy it separately; in addition, the “native” pump initially fits the existing mounts, while problems may arise with a third-party one. Note that most often the kit comes with relatively simple and compact hand pumps; they are not designed for large volumes of work, but they can quite cope with everyday tasks like pumping a flat tyre.