Comparison Karcher KWD 1 vs Karcher WD 2

The ability to use a vacuum cleaner to collect spilt water and other liquids.

By definition, all washing vacuum cleaners have this function (see above) but the matter is not limited to this. Water suction can also be provided for in simpler models (including even units that do not have a wet cleaning function). Accordingly, the specific possibilities for collecting liquid may be different — first of all, this concerns the maximum volume. Before use, it's ok to clarify the restrictions on the types of liquids being such. However, even the simplest vacuum cleaner with this feature can be an excellent alternative to a sponge or rag. Especially if there is a lot of liquid and it would take a long time to wipe it manually. And if a unit with similar functionality does not support wet cleaning (see “Cleaning type”) you can use water collection as an alternative: pour the liquid over the floor and then collect it with a vacuum cleaner. Of course, such a procedure can only be carried out on materials that are resistant to moisture — for parquet and laminate, not to mention carpets, it is not suitable.

Ability of operation of the vacuum cleaner in the air blowing mode.

As the name suggests, it is the opposite of the standard suction mode. The air is not drawn into the hose but is forced out of it. This function significantly expands the functionality of the vacuum cleaner. In particular, it allows you to use the unit as a leaf blower for cleaning fallen leaves from the porch or paths in the yard, or for sweeping large debris into one pile. At the same time, blowing is especially useful where suction cannot be applied — like on paths covered with rubble. In addition, this mode can be useful for cleaning some hard-to-reach places — for example, radiators and other slots in the “hardware” of a computer: for several reasons, blowing out such places often turns out to be more effective than drawing in dirt.

Usually, to use this mode, it is enough to rearrange the hose from the main working port to the "purge" one.

The noise level produced by the vacuum cleaner during operation. Usually, the value for normal operation at maximum engine power is indicated here. With less power, the loudness of the unit may be lower, but the key is precisely the maximum indicator.

Regarding specific numbers, keep in mind that the decibel used to measure the noise level is a non-linear quantity. Therefore, it is worth evaluating specific indicators using special comparative tables. In general, vacuum cleaners are quite noisy appliances; so in this case, models are considered quiet if this indicator does not exceed 65 dB — this is the level of a loud conversation between 2 – 3 people at a distance of 1 m. The quietest of these models give out only 40 dB — this is the average volume of a person’s speech in normal tones (and the minimum volume allowed for constant noise sources in living quarters during the day). For louder units, the comparison table looks like this:

— 66 – 70 dB — loud conversations between several groups of people at a distance of about 1 m;
— 71 – 75 dB — the volume of a cry or laughter in full voice at a distance of about 1 m;
— 76 – 80 dB — the volume of a mechanical alarm clock or the engine of an old truck;
— more than 80 dB — a very high noise level, exceeding the level of a loud scr...eam; when working with a vacuum cleaner having such specifications for a long time, it is highly desirable to use hearing protection.

Also note that the noise level largely depends on the engine power, as well as some other features (for example, it is strongly affected by the presence of an aquafilter — see "Dust collector"). At the same time, there is no hard connection here, and units with a similar set of specifications can differ markedly in actual loudness. In such cases, when choosing here, it is worth proceeding from the fact that a quieter vacuum cleaner will be more comfortable to use. However, it will most likely cost noticeably more.

The type of rigid tube supplied with the vacuum cleaner.

The most popular are telescopic tubes, extension tubes are much less common, and with some upright with handheld vacuum cleaners (see "Type"), tubes with a hinge are supplied in the kit (they are also "bendable" or "flex"). Here is a more detailed description of each option:

— Telescopic tube. Non-separable tube folded telescopically — by inserting one section into another. This option is the most convenient from the user's point of view. Firstly, such accessories are easy to unfold and fold — just press or slide the release key and pull or push the halves in the right direction. Secondly, many telescopic tubes are equipped with a mechanism that allows the structure to be unfolded incompletely. Thanks to this, you can adjust the length during the cleaning process (for example, reduce it to work in cramped conditions). Thirdly, the individual parts of such a tube can't be lost, which simplifies storage. The main disadvantage of this option is considered to be somewhat lower strength and reliability than that of extension tubes. However, this difference is noticeable only at high loads. Thus, telescopic tubes are very popular in conventional vacuum cleaners (see "Type"), but they are found in other types, including industrial (construction). The “telescope” cannot be found in only three types of vacuum cleaners: in robots (they do no...t use tubes), as well as, in industrial handheld units and fireplace models — they most often work only with a hose.

— Extension tubes. A tube consists of several parts connected during operation and disassembled for storage/transportation. Such designs are somewhat less convenient to use than telescopic ones, but they endure high loads much better and last longer. Thus, extension tubes are rarely used in conventional vacuum cleaners, but they are popular in professional units — industrial, workshop, etc.

— Bendable tube. A tube has a hinge in the middle and can bend at an upward angle. It is a rather specific option, used in some vacuum cleaners of the "upright with handheld" type. This design makes it much easier to clean with such a vacuum cleaner under sofas, beds, tables, etc. By bending the tube, you can effectively treat such places without lowering the vacuum cleaner body to the floor. On the other hand, the hinge significantly complicates the design and increases its cost, and far from all users, these disadvantages are outweighed by the mentioned ease of use. That is why this type of pipe is extremely rare.

The presence in the vacuum cleaner of a special device for storing nozzles and sometimes other accessories.

Such a device can be either a compartment in the case or a set of external fasteners; the latter, in particular, is quite common in industrial vacuum cleaners (see "Type"). Anyway, the attachment compartment makes it much easier to store and transport various accessories: they are not scattered or lost, and you do not need to look for a separate package for them. However, such a compartment is often not intended for all nozzles and accessories but only for the smallest ones. However, even in such cases, it makes life much easier for the user. The disadvantages of such equipment include the fact that it inevitably affects the dimensions of the case. However, in full-size vacuum cleaners — conventional, industrial, for workshop (see "Type") — this disadvantage is often not important.

The length of the power cord that is equipped with a vacuum cleaner powered by an outlet.

Here we note that manufacturers select the specific length of the cord depending on the general purpose of the unit. In general, the length of 4 – 5 m and less can be called small, 5 – 6 m — medium, 6 – 7 m and 7 – 8 m — more than average, and in some models this figure is more than 8 m. However, a lot depends on the specifics of the vacuum cleaner. For example, among conventional units there are many models with a 4-5 m wire (this is enough for cleaning on the scale of an apartment, a private house or a small office space), but for industrial solutions this is a very limited indicator.

Keep in mind that a longer power cord is not always more convenient. On the one hand, it provides more freedom when working. On the other hand, it can create inconvenience at a short distance from the outlet as well as during storage/transportation. In addition, you can use an extension cord to work away from the outlet. So when choosing, you need to take into account the specific needs of the use of a vacuum cleaner. Detailed recommendations for different situations can be found in special sources.