Comparison Yamaha YDP-165 vs Yamaha P-45

— Stationary. Stationary tools have their own stand and are designed to be installed directly on the floor. At the same time, in accordance with the name, such models are designed for constant stay in one place and are poorly suited for regular movements even within the same room, not to mention longer distances. However, this is not a disadvantage, but only a characteristic feature of such cases. But the unequivocal disadvantage of stationary tools can be called their rather high cost. On the other hand, such models are as similar as possible to real pianos in appearance, layout and equipment: the keyboard, usually, is located at a standard height, and pedals are installed in the lower part of the case (and there are usually as many as three of them, a complete set). And it is much easier to provide high-quality sound and an abundance of features in such an instrument than in a portable one — the manufacturer does not need to pay special attention to compactness and weight reduction.

— Portable. Portable are called digital pianos, made in the form of portable keyboards and devoid of stands; to play such a keyboard, you need to put it on a table or other support. Outwardly, such instruments are similar to synthesizers, and sometimes almost indistinguishable from them. At the same time, unlike synthesizers, portable digital pianos have mostly full-size keyboards with 88 keys, and displays are rarel...y equipped. And in terms of functionality, the differences are that digital pianos are more oriented towards traditional music: they can provide relatively few timbres, often do not support auto-accompaniment (see below), but provide a fairly high sound quality. If we compare portable models with stationary ones, then the key advantage of this option is obvious — the tool can be moved from place to place with relative ease and even carried with you, if you have the appropriate case. The disadvantage also naturally follows from the design — it will be extremely difficult to play such an instrument without additional support, and not every piece of furniture can play the role of such a support. So it is almost impossible for a portable digital piano to do without a stand (see "Packaging").

The presence of its own cover in the design of a digital piano.

Such a cover during off-hours closes the keyboard, and often also additional controls. This not only gives the instrument a neat appearance, but also protects the keys — primarily from dust (and dust can not only create discomfort during use, but also cause mechanical failures, accumulating under the keys).

Note that this function is typical for stationary tools (see "Body"). Portable models with lids would be too bulky and heavy, so it is suggested that they use cases or other similar devices.

The presence of built-in pedals in the design of a digital piano.

Pedals are an indispensable element of equipping a classical piano; accordingly, they are often provided in digital counterparts. Actually, this function is practically obligatory for models of a stationary layout (see "Hull"). But in portable ones, on the contrary, built-in pedals are not found — there is simply nowhere to install them, external plug-in pedals are available for such models (see below).

The traditional number of built-in pedals is three; there are practically no other options in a power tool. Note that in many models, the specific functions of the pedals can change depending on the set timbre, or even manually, at the request of the musician.

The number of voices supported by the digital piano — more precisely, the maximum number of voices that the instrument can play at the same time.

This parameter should not be confused with the number of notes that can be played simultaneously on the keyboard. The fact is that in many timbres, several voices (tone generators) are used for each note at once — this is the only way to achieve a more or less reliable sound. Thus, the required number of voices can be many times higher than the number of notes — for example, the simplest chord of 3 notes may require 9 or even 12 voices. In addition, tone generators are used to play auto accompaniment parts and built-in songs (see below), and here the number of voices can already be measured in tens.

In light of all this, polyphony of less than 90 voices is typical mainly for relatively simple and inexpensive instruments that are not designed for complex tasks. The smallest number found in modern digital pianos is 32 voices. It is desirable for a more or less solid instrument to have at least 96 voices, and in top models this figure can reach 256.

The range over which the tempo of the sound played by the instrument can change. It can be either a built-in melody or a part recorded on a sequencer, or an auto accompaniment, a tutorial or a metronome. For more information on all of these features, see the corresponding glossary entries. Here we note that a change in tempo is often required in fact — for example, to speed up an initially "sluggish" accompaniment or slow down a training programme that is difficult to master at the original tempo.

Tempo is traditionally indicated in beats per minute. The classical, "academic" range covers options from 40 bpm ("grave", "very slow") to 208 bpm ("prestissimo", "very fast"), however, in modern digital pianos, the working range of tempos is often significantly wider.

The presence of a sequencer in the design of a digital piano.

This function allows you not only to play music on the instrument, but also to record it with the possibility of later playback. However, this is at least; in addition to recording the parts of the instrument itself, the sequencer can provide recording an audio or MIDI signal from the corresponding input, mixing several parts (including recording the music being played over the music being played “on the go”), working with the parameters of individual tracks (volume, tone, timbre), as well as specific functions such as quantization (smoothing uneven tempo). The specific functionality of the sequencer may be different, it's ok to check it before buying. However, anyway, this function can be a good help for the musician; it is especially useful for those who are not limited to the performance of ready-made music and want to compose their own compositions.

The presence of an octave shift function in the digital piano.

This function makes it possible to "shift" the sound by a certain number of octaves up or down — for example, in such a way that the bass register sounds on the keys of the first octave, or vice versa, the first octave "slid" lower, into the bass, and notes of the second sounded in its place or even the third octave.

This feature significantly expands the range of the instrument, allowing you to play notes that were not originally covered by the keyboard. This is especially important for instruments with 61 or 73 keys (see "Number of Keys"), but octave shifting is not uncommon in full-sized 88-key models — it can be useful when splitting the keyboard (see above), when available for each hand the range is noticeably reduced, and the batch can be very low or very high. However, there are other options for using transfer — for example, so that when playing an updated version of the melody, you do not have to move from the usual octaves.

Additional features and sound customization options provided by the instrument in addition to those listed above. In this paragraph, usually, various original proprietary technologies and solutions are indicated; the specific meaning of these functions is best specified in the documentation for the tool.

The number of headphone outputs provided in the design of the digital piano.

Headphones can come in handy in situations where it is inconvenient or undesirable for one reason or another to use the digital piano's built-in speakers — for example, if you need to keep quiet and not disturb others with music, or vice versa, the environment is too noisy and it is difficult to hear the sound of the instrument. At the same time, many digital pianos have two headphone outputs, which allows two people to use the “ears” at the same time. This feature can be useful, for example, when playing 4 hands on one keyboard, or when teaching (the second pair of headphones in such cases is used by the teacher).

The outputs of this type themselves most often use a 3.5 mm mini-Jack or 6.35 mm Jack connector. The first option is the most popular in modern headphones; the Jack connector, in turn, is somewhat more reliable, and the “ears” with a mini-Jack plug can be connected to such a jack using a simple adapter.