Comparison Bambi 168-E vs Myriwell RP100B
Add to comparison |  |  |
|---|---|---|
| Bambi 168-E | Myriwell RP100B | |
| Outdated Product | from $54.00 | |
| TOP sellers | ||
Display for displaying parameters. Automatic plastic feed. Smooth speed control. Working with ABS and PLA plastic. Auto power off after 2 min. inaction. | ||
| Product Type | hot printing | hot printing |
| Filament Material | ABS + PLA | ABS + PLA |
| Min thread diameter | 1.75 mm | 1.75 mm |
| Nozzle Diameter | 0.7 mm | |
| Print Speed | 40 mm/s | |
Features | ||
| Temperature Adjust |  | |
| Smooth Speed Adjust | | |
| Auto Power Off | | |
| Display | | |
General | ||
| Tip Material | ceramics | ceramics |
| Country of brand origin | China | China |
| Dimensions | 190 mm | 180 mm |
| Weight | 65 g | 60 g |
| Added to E-Catalog | february 2022 | july 2015 |
Compare Bambi 168-E and Myriwell RP100B
You may be interested in
My comparisons
Bambi 168-E often compared
Myriwell RP100B often compared
Glossary
Nozzle Diameter
The diameter of the nozzle provided in the pen.
The larger the nozzle, the thicker the lines produced by the pen will be (ceteris paribus; the actual thickness of the lines will also depend on the type of plastic and the adjusted temperature). In the thinnest models, the nozzle diameter is less than 0.5 mm, in the thickest models it is about 0.9 mm. Most modern 3D pens have nozzles in the range of 0.6 – 0.7 mm — this value is considered the most versatile and convenient for practical use.
The larger the nozzle, the thicker the lines produced by the pen will be (ceteris paribus; the actual thickness of the lines will also depend on the type of plastic and the adjusted temperature). In the thinnest models, the nozzle diameter is less than 0.5 mm, in the thickest models it is about 0.9 mm. Most modern 3D pens have nozzles in the range of 0.6 – 0.7 mm — this value is considered the most versatile and convenient for practical use.
Print Speed
The material feed rate provided by the pen. The higher this speed, the faster you can work with this model; on the other hand, the rapid supply of material requires increased accuracy and serious skills. The maximum value of this parameter in modern 3D pens is about 40 mm/s. Models with adjusted speed is also available (see below); for them, usually, the highest speed of operation is given in the specs.