Comparison Atem Zhytomyr-M AOGV-5 SN 5 kW vs TermoBar KS-GS-5S 5 kW

Clear Table
Add to comparison
	Atem Zhytomyr-M AOGV-5 SN 5 kW	TermoBar KS-GS-5S 5 kW
	from $160.00 up to $180.36 Outdated Product	from $158.15 up to $184.36 Outdated Product
all specs only differences
TOP sellers	Find prices on Amazon.com Find prices on eBay.com	Find prices on Amazon.com Find prices on eBay.com
Energy source	gas	gas
Installation	parapet	parapet
Type	single-circuit (heating only)	single-circuit (heating only)
Heating area	40 m²	40 m²
Technical specs
Heat output	5 kW	5 kW
Power supply	230 V	230 V
Coolant min. T		40 °С
Coolant max. T	90 °С	80 °С
Consumer specs
Circulation pump
Boiler specs
Efficiency	90 %	90 %
Combustion chamber	closed (turbocharged)	closed (turbocharged)
Inlet gas pressure	13 mbar	13 mbar
Max. gas consumption	0.3 m³/h	0.56 m³/h
Connections
Gas supply	1/2"	1/2"
Central heating flow	1 1/2"
Central heating return	1 1/2"
Safety
Safety systems	gas pressure drop water overheating flame loss draft control	gas pressure drop water overheating flame loss draft control
More specs
Dimensions (HxWxD)	590x310x325 mm	565x400x260 mm
Weight	34.5 kg	40 kg
Added to E-Catalog	august 2014	august 2014

Coolant min. T

The minimum operating temperature of the heat medium in the boiler system when operating in heating mode.

Coolant max. T

The maximum operating temperature of the heat medium in the boiler system when operating in heating mode.

Max. gas consumption

Maximum gas consumption in the boiler with the corresponding energy source (see above). Achieved when the gas heater is operating at full capacity; with reduced power and consumption, respectively, will be lower.

Note that boilers of the same power may differ in gas consumption due to the difference in efficiency. While the more fuel-efficient models tend to cost more, the price difference pays off in gas savings.

Central heating flow

The diameter of the pipe for connecting the pipe through which the heated water enters the heating system from the boiler.

Diameters are indicated in inches. In some cases, it is allowed to connect a pipe of a different diameter through an adapter, but the best option is still a match in size. Among which models stand out for 3/4", 1", 1 1/4" and 1 1/2".

Central heating return

The diameter of the pipe for connecting the pipe through which the cooled water returns from the heating system to the boiler.

Diameters are indicated in inches. In some cases, it is allowed to connect a pipe of a different diameter through an adapter, but the best option is still a match in size.