Comparison Razer Naga V2 Pro vs Razer Naga Pro Wireless

The model of the sensor installed in the mouse. This information is indicated mainly for models equipped with high-end sensors, which are significantly superior in their capabilities to simpler solutions. Such characteristics are important primarily for gaming mice, so most of the devices for which the sensor model is specified belong to this category.

Knowing the name, you can find detailed data on the sensor and evaluate its capabilities. Note that one of the most popular brands nowadays, under which advanced sensors are produced, is PixArt ; on the market are often found, in particular, sensors PixArt 3325(advanced low-cost level), PixArt 3360(top class) and PixArt 3389(an even more improved version of the 3360 model). The second common brand is Avago(recently owned by the same PixArt); the most popular model of this brand is Avago 3050, the simplest and most affordable representative of gaming sensors.

Resolution of the sensor responsible for tracking mouse movements on the work surface. Specified in DPI — dots per inch.

The physical meaning of DPI as a whole is as follows. The sensor of a modern mouse works on the same principle as the camera matrix, and consists of pixels. And DPI is the number of pixels that fall on 1 inch of the underlying surface (length or width), "visible" by the sensor.

It is believed that more DPI means a more advanced sensor and mouse in general; nowadays, models for 3500 – 5000 DPI, 12000 DPI, 16000 DPI even more are not uncommon. In a way, it is — high resolution contributes to accuracy. However, the only thing that is directly determined by this indicator is the speed at which the cursor moves across the screen: the higher the resolution of the sensor, the greater the number of pixels that the cursor will move when the mouse itself moves a certain distance. At the same time, it is worth recalling that too high a speed is even more undesirable than too low. So the real need for high DPI ( 1000 and above) arises mainly when working on large screens (4K resolution and more); for more modest displays (HD and Full HD), smaller values are often enough.

The greatest acceleration during movement, at which the mouse maintains normal performance; if this indicator is exceeded, the cursor may “break down” (moving to an unexpected place due to incorrect processing of data from the sensor).

The faster the mouse moves, the greater the acceleration acting on it. Accordingly, this parameter determines the sensitivity to sudden movements, the extent to which this model is able to normally perceive and process such movements. High values of maximum acceleration ( 40 G, 50 G) are important first of all in dynamic games, especially for professional e-sportsmen and advanced enthusiasts. If the mouse is bought for relatively simple tasks (working with documents, surfing the web, etc.), you can ignore this indicator.

The ips (inches per second) parameter is the linear speed of mouse movement, expressed in inches per second, at which the manipulator's sensor is able to read the surface. In top models, the maximum mouse movement speed often reaches 400-600 ips, but devices with ips in the region of 200 are more common.

The brand of switches (switches) installed in the mouse. Also, these parts are often called "mikriki" — from the term "microswitches". Usually, the characteristics indicate the brand of switches used in the main buttons (left and right); additional buttons, usually, are equipped with other switches, often simpler and cheaper.

The mics are directly responsible for the operation of the keys when pressed. Accordingly, the quality of the mouse, as well as the feel and comfort of the user, depend on the quality of these parts: different switches can vary in stiffness, ease of operation and the sound of pressing. And the brand of switches is not specified for all mice, but only for models equipped with advanced elements. In other words, this parameter is indicated in cases where the brand of the microswitch is a sign of the high quality of the "rodent". Typical examples include mics under the brands Omron(considered premium) and Huano(Chinese counterparts of quite comparable quality). Light Strike and Razer switches are also pulled up to them.

We emphasize that in this case, not a specific model is indicated, but a general brand under which mikriks are released (sometimes also their type, opto-mechanical or mechanical). At the same time, the same brand may include different models of switche...s that differ in features: some are “quiet”, others with a normal sound, some with increased accuracy, others with an extended service life, etc. So the features of these parts should be clarified separately. However, the detailed characteristics of mikriks are important mainly for demanding users, in particular professional cybersportsmen.

A wheel with an accelerated scrolling mode that allows you to scroll through a large “sheet” of pages in text documents, spreadsheets or on Internet resources in just one movement. The inertial wheel is a hallmark of a number of Logitech mouse models.

The presence of illumination in the design of the mouse.

This illumination can be provided by the same LED that illuminates the surface below the sensor, or by separate light sources. It can have a different colour, and the most advanced systems — RGB backlighting — allow you to adjust the shade to your liking. Anyway, the backlight gives the mouse an unusual and stylish appearance, besides, it can also have special effects (see below). However, this function has not only an aesthetic, but also quite a practical meaning: for example, a colour change can be used as a DPI level indicator (see above) or as a low battery signal. On the other hand, the backlight affects the cost of the device, and the real need for it is not so often — moreover, in many cases (for example, in the office) an extra “illumination” is completely useless. Therefore, most modern mice still do not have a backlight.

The mouse has additional lighting effects. For more information about the backlight itself, see above, and its effects can be different — ranging from a smooth change in brightness and/or colour to colour and light signals, as well as backlight synchronization(for models with synchronization, this paragraph indicates the supported synchronization technology).

The last function is worth dwelling on separately. Synchronization itself allows you to "match" the mouse backlight with the backlight of other system components — the case, graphics card, keyboard, monitor, etc. Thanks to this matching, you can create various unusual effects: synchronous colour and brightness changes, "colour waves", "running lights" etc. However, for such work, all components of the system must support the same synchronization technology — and such a technology, usually, each manufacturer has its own. So before buying it's ok to check compatibility. However, some mice are able to work with several options at once — for example, iCUE from Corsair and MLS (Mystic Light Sync) from MSI.

The type of power used by the wireless mouse (see "Connection Type").

Modern mice can be powered by replaceable cells, by a built-in battery, or by a mousepad. The first option is good because dead batteries can be replaced with fresh ones in a matter of seconds, no need to waste time charging. At the same time, replaceable cells are sold both in the form of disposable batteries and in the form of rechargeable batteries, which gives the user a choice: to buy inexpensive batteries regularly or to spend money on a battery (s) with a charger once. Here are the main sizes of such elements found in modern mice:

— AA. Widely known "finger" batteries. A fairly common option, although less popular than the smaller AAA — in fact, because of the larger size, poorly suited for compact mice. On the other hand, AA cells have higher capacitance. The number of such batteries can be different, most often there are models for 1xAA or 2xAA.

— AAA. "Mini finger" or "little finger" batteries. More compact than AA, due to which they are widely used in modern mice. The capacity of such elements, however, is lower, however, mice do not consume so much energy, and even with 1xAAA power supply, battery life can be calculated not only for months, but for years. Also, there are often models on ...="/list/267/pr-15332/">2xAAA, and extremely rarely on 3xAAA.

As for other ways of eating, their features are as follows:

— Accumulator. Own built-in battery is convenient primarily because it is initially included in the package, you do not need to buy it separately. And the further operation of such a mouse does not require additional expenses — it is enough to charge it from time to time. In addition, batteries can be made more compact than replacement cells. There are two main disadvantages of such a power supply, compared with the same batteries. Firstly, this is less battery life — in the most "long-playing" rechargeable mice, the battery life does not exceed 120 days (for batteries, this is a very limited indicator). The second point is the inability to quickly remove and replace the battery. This means that with a dead battery, there is only one option — charging, and it takes time; however, many mice allow use directly in the process of charging. But if the battery fails, at best, the device will have to be carried to the service, at worst, it will be changed entirely.

— From the rug. Quite a specific option: powered by a special pad that transmits energy to the mouse wirelessly. The pad needs to be connected to a computer port (usually USB), so such mice are very conditionally wireless. One of the advantages of such models is that they do not need to monitor the battery status. On the other hand, you can use the mouse only with the supplied mouse pad; if it is missing, the device becomes useless; and freedom of movement is limited by the length of the wire. Thus, mice with such a power supply do not actually have key advantages over wired models, and they are much more expensive. So nowadays, food from the rug is extremely rare.