USA
Catalog   /   Computing   /   Components   /   Hard Drives

Comparison Seagate One Touch HDD STKB2000400 2 TB vs Seagate Basic STJL2000400 2 TB

Add to comparison
Seagate One Touch HDD STKB2000400 2 TB
Seagate Basic STJL2000400 2 TB
Seagate One Touch HDD STKB2000400 2 TBSeagate Basic STJL2000400 2 TB
Compare prices 1
from $83.83 
Expecting restock
TOP sellers
Placementexternalexternal
TypeHDDHDD
FeaturespCpC
Size2000 GB2000 GB
Form factor2.5 "2.5 "
Manufacturer's warranty2 years1 year
Connection
Interface
USB 3.2 gen1
USB 3.2 gen1
General
Power source (external)USB port
Materialmetalplastic
Size115x78x12 mm117x80x20 mm
Weight148 g260 g
Color
Added to E-Catalogjanuary 2021march 2020

Manufacturer's warranty

Manufacturer's warranty provided for this model.

In fact, this is the minimum service life promised by the manufacturer, subject to the rules of operation. Most often, the actual service life of the device is much longer than the guaranteed one.

Power source (external)

USB port. Powering an external hard drive directly through the USB connector used to connect to a computer. The advantage of such disks is that they do not require a separate power supply — thus, they can be used even with laptops in the absence of an electrical outlet. However, it is worth considering that the power of the current supplied through the USB connector may sometimes not be enough to start the disc — especially if the connection is made through a USB hub at the same time as several other devices.

— Thunderbolt. Powered directly through the Thunderbolt connector — the same one used for the main connection. For more information about the connector itself, see “Connection Interfaces”, otherwise this option is completely similar to the USB power supply described above (adjusted for the fact that Thunderbolt does not use hubs).

Power supply. Power supply of an external drive from a separate unit connected to a standard 220V network. Such drives may have a connection interface other than USB, are free from problems associated with insufficient power supply, but their mobility is limited by the availability of electrical outlets.

Material

Main material used for external hard drive enclosure (see "Performance").

Plastic. The most common option. Plastic is light, cheap, quite practical, including has good strength properties. In addition, it allows you to create cases of complex shape and almost any colour.

Metal. Usually, aluminium-based alloys are used for metal cases, but other options are also found. Anyway, such cases are much stronger than plastic ones, and also have a stylish appearance. On the other hand, in terms of impact protection, this material has no advantages over plastic, but it costs much more, and it can weigh much more (depending on the specific alloy).

Rubberized. In this case, it usually means an additional external coating of rubber applied to a plastic or metal case. All rubberized cases are classified as shock resistant (see Features/Features) — thanks to their softness and resiliency, this coating provides additional protection against impacts. In addition, this material does not slip in the hands, thereby reducing the risk of dropping the device.

— Leather. Housing made of hard material (metal or plastic, see above) covered with natural or artificial leather. Such a coating plays an exclusively aesthetic role: it gives the hard drive a solid appearance, actually turning the device into a fashion accessory. At the same time, the use of...leather significantly affects the cost; so paying attention to such models is for those for whom the design of the drive is no less important than the functionality.
Seagate Basic often compared