USA
Catalog   /   Computing   /   Components   /   Graphics Cards

Comparison Asus GeForce RTX 4080 ROG Strix 16GB vs Asus GeForce RTX 4080 TUF

Add to comparison
Asus GeForce RTX 4080 ROG Strix 16GB
Asus GeForce RTX 4080 TUF
Asus GeForce RTX 4080 ROG Strix 16GBAsus GeForce RTX 4080 TUF
from $1,796.08 
Outdated Product
Compare prices 2
TOP sellers
InterfacePCI-E v4.0PCI-E v4.0
GPU
GPU modelNVIDIA GeForce RTX 4080NVIDIA GeForce RTX 4080
ArchitectureAda LovelaceAda Lovelace
Memory size16 GB16 GB
Memory typeGDDR6XGDDR6X
Memory bus256 bit256 bit
GPU clock speed2535 MHz2535 MHz
Memory clock23000 MHz23000 MHz
Lithography5 nm5 nm
Max. resolution7680x4320 px7680x4320 px
Passmark G3D Mark34587 score(s)34587 score(s)
Connections
HDMI21
HDMI versionv.2.1av.2.1a
DisplayPort23
DisplayPort versionv.1.4av.1.4a
Software
DirectX12 Ultimate12 Ultimate
OpenGL4.64.6
VR
Stream processors97289728
General
Monitors connection44
Coolingactive (fan)active (fan)
Fans33
Lighting
Lighting syncAsus Aura SyncAsus Aura Sync
Additional power16 pin16 pin
Minimum PSU recommendation700 W750 W
Number of slots3.53.7
Length
358 mm /358x149x70/
348 mm /348x160x73/
Added to E-Catalogseptember 2022september 2022

HDMI

The number of HDMI outputs provided by the graphics card.

HDMI is by far the most popular interface for high-definition video and multi-channel audio (it can be used for video and audio at the same time). This connector is almost standard for modern monitors, in addition, it is widely used in other types of screens — TVs, plasma panels, projectors, etc.

The presence of several outputs allows you to connect several screens to the graphics card at the same time — for example, a pair of monitors for organizing an extended workspace. However, there are never more than 2 HDMI ports in video cards — for a number of reasons, for several screens at once, in this case it is easier to use other connectors, primarily DisplayPort.

DisplayPort

The number of DisplayPort outputs provided by the graphics card.

DisplayPort is a digital media interface similar in many ways to HDMI, but primarily used in computers. The specific capabilities of this interface depend on the version (see below), but even in the most modest modern version of DisplayPort, it allows at least 4K at 60 frames per second and 5K at 30 fps. Another interesting feature of this standard is the ability to daisy-chain multiple screens to one port (“daisy chain” format).

In light of the latter, we can say that the number of DisplayPort outputs corresponds to the number of screens that can be connected directly to the graphics card, without using a daisy chain. Such a connection may be required, in particular, for monitors that do not support daisy chaining. If such a mode is supported, the maximum number of screens will be at least twice as high as the number of connectors. However, it is worth considering that the resolutions supported by the video adapter itself may not reach the maximum capabilities of the DisplayPort version used.

Minimum PSU recommendation

The smallest power supply recommended for a computer with this graphics card.

This parameter, usually, is much higher than the power consumption of the graphics card itself. This is natural — after all, the PSU must provide electricity to the entire system, not just the video adapter. At the same time, the higher the power of the graphics card, the inevitably higher the power consumption of the PC as a whole. Moreover, this is due not only to the “voracity” of the graphics adapter itself, but also to the consumption of other PC components: a high-end graphics card, usually, is combined with an equally powerful (and energy-intensive) system.

With this in mind, manufacturers indicate the minimum recommended power supply. Of course, such recommendations are not mandatory; however, when using a PSU with a power lower than the recommended one, the probability of malfunctions increases significantly — to the point that even a very limited system may simply “not start”.

Number of slots

The number of slots occupied by the graphics card on the back of the system unit.

This indicator allows you to estimate the amount of space required to install a video adapter. It is relevant in the light of the fact that modern video cards can have a fairly extensive set of connectors, and for this set there has long been little standard lanyard for 1 slot. This is especially true for powerful performant models. Thus, many solutions, especially mid-range and top-end ones, occupy two or even three slots at once.

Separately, it is worth touching on models for which the characteristics indicate a fractional number of slots — usually 2.5 or 2.7. This detail is provided by the manufacturer for promotional purposes — as confirmation that the graphics card is smaller than a full-fledged 3-slot solution. However, in fact there is no difference between these options: adapters for 2.5 or 2.7 slots still block the third slot (albeit partially), making it unusable.

Length

The total length of the graphics card.

In this case, the length means the size of the device from the plate with connectors (which is attached to the back wall of the system unit) to the opposite side. The plate itself and the outwardly protruding connectors are usually not taken into account.

Data on the length of the graphics card is needed primarily in order to assess whether there is enough space for it in a particular case. In addition, longer boards, usually, have more advanced characteristics (although there is no hard dependence here, and video adapters of similar class may have different lengths). As for specific values, the most compact solutions nowadays have a size of 150 – 200 mm or less ; an indicator of 200 – 250 mm can still be considered relatively small, 250 – 290 mm — medium, and many models (mostly advanced) have a length of more than 290 mm.
Asus GeForce RTX 4080 ROG Strix 16GB often compared
Asus GeForce RTX 4080 TUF often compared