Worx WX240
 | Expecting restock A cordless electric screwdriver designed for tightening and loosening small screws and bolts. The tool has one working speed (300 rpm) and three stages of tightening force adjustment. The maximum torque that the Worx WX240 cordless screwdriver can provide is 2.5 Nm. At the back of the case there is a USB-C connector covered with a plug, through which the built-in battery with a capacity of 1.5 Ah is charged. In front, near the chuck, there are two LEDs designed to illuminate the work area when tightening screws and bolts in poorly lit places. The tool is supplied in a small plastic case, which, in addition to the screwdriver itself, contains a USB cable needed to charge the battery, a set of 25 bits of different types and sizes and a magnetic holder for attachments. E-Catalog uses affiliate links compensated by our partners. |
Worx WX240 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||
A cordless electric screwdriver designed for tightening and loosening small screws and bolts. The tool has one working speed (300 rpm) and three stages of tightening force adjustment. The maximum torque that the Worx WX240 cordless screwdriver can provide is 2.5 Nm. At the back of the case there is a USB-C connector covered with a plug, through which the built-in battery with a capacity of 1.5 Ah is charged. In front, near the chuck, there are two LEDs designed to illuminate the work area when tightening screws and bolts in poorly lit places. The tool is supplied in a small plastic case, which, in addition to the screwdriver itself, contains a USB cable needed to charge the battery, a set of 25 bits of different types and sizes and a magnetic holder for attachments.
The information in the model description is for reference purposes.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Worx 2026 - new arrivals, bestsellers, and the most relevant models Worx.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Worx 2026 - new arrivals, bestsellers, and the most relevant models Worx.
Drill chuck: types and differencesSpecifics of different types of chucks for drilling and working with fasteners
Which is better: drill, screwdriver or drill-driver?We study the design features and specifics of the use of such similar, but still different types of power tools
AccessoriesAll accessories for Worx WX240 →
I had a 240, but it got worn out. Bought a new one, but this time a 242. Can't say anything bad about the 240. It did its job well. As long as you don't expect it to fly to space—it's awesome! Holds the charge well. Has never stripped a thread, even in plastic. However, I did wear it out on dense wood. If you have to do a lot of screwing, pay attention to the pistol grip. Because with this one, you won't get a lot done; your hand gets tired. It doesn't fly into space)))  Oleg: |
Add Review
We recommendCompare using chart →
screwdriver, variable, 2450 rpm, 1 speed, cartridge: bit holder, impact mode, reverse, motor brake, power supply: battery, 7.2 H, 1.5 Ah, 2, case
drill driver, gun, 500/1800 rpm, cartridge: keyless, Ø 13 mm, impact mode, reverse, motor brake, power supply: battery, 18 H, 2 Ah, 2, case
impact wrench, gun, 1200 W, 1400 rpm, 1 speed, cartridge: square drive, 1 ", impact mode, reverse, power supply: mains (230 V), case
drill, gun / angle, 710 W, 600 rpm, 1 speed, cartridge: key, Ø 13 mm, reverse, power supply: mains (230 V), case
drill driver, gun, brushless motor, 550/1800 rpm, cartridge: keyless, Ø 13 mm, impact mode, reverse, motor brake, power supply: battery, 18 H, 5 Ah, 2, case
drill driver, gun, 550 rpm, 1 speed, cartridge: keyless, Ø 10 mm, reverse, motor brake, power supply: battery, 10.8 H, 1.5 Ah, 1
drill driver, gun, 400/1500 rpm, cartridge: keyless, Ø 10 mm, reverse, motor brake, power supply: battery, 12 H, 1.5 Ah, 2, case
screwdriver, gun, 1050 rpm, 1 speed, cartridge: bit holder, reverse, motor brake, power supply: battery, 12 H, 1.5 Ah, 2, case
drill driver, gun, brushless motor, 440/1700 rpm, cartridge: keyless, Ø 13 mm, impact mode, reverse, motor brake, power supply: battery, 18 H
drill, angle, 450 W, 2400 rpm, 1 speed, cartridge: key, Ø 10 mm, reverse, power supply: mains (230 V)
drill driver, gun, 450/1500 rpm, cartridge: keyless, Ø 13 mm, reverse, motor brake, power supply: battery, 18 H, 1.3 Ah, 2, case
drill, gun, 750 W, 3000 rpm, 1 speed, cartridge: key, Ø 13 mm, impact mode, reverse, power supply: mains (230 V), case