Thermal Grizzly Conductonaut 1g (TG-C-001-R)

Liquid metal eutectic alloy based on gallium, indium, tin for overclocking and use instead of thermal paste in systems with high heat dissipation. It has an extremely high thermal conductivity of 73 W/m∙K, which is 6-10 times higher than the best thermal pastes. Thanks to these characteristics, when used correctly, it provides low thermal resistance at the point of contact between the heat spreader of the chip and the base of the radiator.

The operating range of the liquid metal alloy is from 10 to 140 °C, which allows it to be used in air and liquid cooling systems. The Thermal Grizzly Conductonaut 1g thermal interface will help you cope with high heat fluxes, which is crucial for successful overclocking and stable operation of systems that operate in 24/7 overclocking mode. Can be used on PC/laptop CPUs and video cards.

Supplied in a bag containing a plastic syringe with 1 g of liquid metal alloy, an applicator with a thin nose, a couple of cotton swabs, wipes soaked in alcohol, and instructions that must be strictly followed. Nickel-plated or copper surfaces are best suited for application. It is strictly forbidden to apply on aluminium and its alloys (gallium causes the rapid destruction of aluminium). Due to the high electrical conductivity of liquid metal, it should not be allowed to get on the surface of printed circuit boards.