QSC MP-A20V

QSC's MP-A20V is part of their MP-A Series of commercial amplifiers.The MP-A SeriesBuilding on a QSC's 50-year legacy of amplifier reliability and quality, these music and paging amplifiers offer an incredible amount of flexibility for business music and paging applications, while maintaining high efficiency and low total cost of ownership.Features... moreFlexAmp Technology allows each pair of amplifier channels to deliver up to 400 W total power, in any ratioClass-D output circuitry and switchmode power supply for high efficiency and low cost of ownership1RU amplifier design for rack space savingsLoad selector for driving 4 ?, 8 ?, 70 V or 100 V on each channelSelectable 80 Hz highpass filter offered on each channelPower saving features - Auto-standby (after 28 minutes with seamless auto-ramp when signal returns) and remote standby inputAmp status remote outputRock-solid QSC amplifier dependabilitySpecificationsChannels: 2Power (all channels driven)8 ?: 200W4 ?: 200W70 V: 200W100 V: 200WFlexAmp Technology: Allows each pair of amplifier channels to deliver up to 400 W total power, in any ratioFrequency response at 8 Ω: 20 Hz – 20 kHz +/- 0.5 dBSignal to Noise: > 103 dBInput sensitivity: 1.23 V (+4 dBu)Gain at 8 ?: 30.0 dBOutput circuitry: Class DInput impedance: >10k, balanced or unbalancedMaximum input level: 12.3 V (+24 dBu)Cooling Type: Forced air cooling, thermally regulated fan speed, side/rear-to-front airflowOperating temperature range: (Max) -10° - 50° C, (recommended) 0° - 35° C, reduced performance above 40° CConnectorsInput connectors: Two 3.5mm Euro, 3-pin (green)Remote connectors: One 3.5mm Euro, 5-pin (black)Output connectors: One 5.0mm Euro, 4-pin (green)Front panel indicators: Power, signal (per channel), limit / mute / protect (per channel)Rear panel indicators: Bi-Color LED signal / limit/ mute/ protectUser-configurable operating modes (per channel): DIP switch selectable, low impedance 4 ? or 8 ?, high impedance direct drive 70 V or 100 VRemote I/O: Remote standby, amplifier status enunciation on 3.5 mm connectorsHighpass filter: 80 Hz DIP switch engaged per channelDimensions (H x W x D): 1.75 x 19 x 14.8 in (44 x 483 x 377 mm)Net weight: 7.7 lb (3.5 kg)Shipping weight: 12.3 lb (5.6 kg)Power requirements: Universal power supply (with active power factor correction), 100 – 240 VAC, 50 -60 Hz QSC MP-A20V Multi-Channel Amplifier, 400W.