Electro-Voice CPS 4

Enhance your professional audio installations with the Electro-Voice CPS4.10 Power Amplifier, a robust and versatile solution engineered for peak performance and reliability. This advanced amplifier features four independent Class-D Variable Load Drive (VLD) amplifier blocks, each with the capability to deliver a formidable 1000 Watts of power, ens... moreuring that your sound system operates with unmatched clarity and strength.Designed to cater to both Low-Z (low impedance) and High-Z (high impedance) loads, the CPS4.10 offers unparalleled flexibility. Each channel is individually configurable, allowing for maximum power output into diverse load conditions, including 2 Ohms, 4 Ohms, and constant

The Electro-Voice CPS4.5 is a four-channel amplifier from Electro-Voice featuring groundbreaking Class-D technology for maximum amp efficiency. Power into 2 Ohms, 4 Ohms, 70V or 100V lines are all possible, and no transformer is required. Additionally, amplifier channels can be bridged in pairs for double output power. A module slot for the optiona... morel RCM-810 remote control module provides control network functionality, allowing for remote system diagnostics via IRIS-Net software as well as Variable Load Drive (VLD).Electro-Voice CPS4.5 Features:Designed for Cinema, Club Sound, Commercial Sound/LifeSafety, Performance & Sports Venues, Stadium Systems, and otherapplications.Four amplifier channels, each can be run as either lowor high impedance, delivering up to 500 W per channelPhoenix-type input and output connectionsRemote power-on/off contactRear-mounted attenuatorsModule slot for optional RCM-810 card, allowingIRIS-Net control and monitoringOptional RCM-810 card allows for VLD configuration inIRIS-Net allowing configuration of each output channel power tomatch any load from 2-10 ohms in 0.1 ohm steps50 Hz high-pass filter when operating in Hi-Z modeClass-D design for optimum efficiencyComplete protection packageElectro-Voice CPS4.5 Specifications:Amplifier Gain 32 dB (Lo-Z), 33 dB (70V), 36 dB(100V)Analog Inputs 4, electronically balanced,Phoenix-typeAudio Network NoCAN Bus Interface Yes (With Optional RCM-810Card)Continuous Rated Power (1 kHz, THD 1%) 100v 500WattsContinuous Rated Power (1 kHz, THD 1%) 2? 500WattsContinuous Rated Power (1 kHz, THD 1%) 4? 500WattsContinuous Rated Power (1 kHz, THD 1%) 70v 500WattsContinuous Rated Power (1 kHz, THD 1%) 8? 250WattsContinuous Rated Power (20-20 kHz, THD< 0,2%)100v 450 WattsContinuous Rated Power (20-20 kHz, THD< 0,2%)4? 450 WattsContinuous Rated Power (20-20 kHz, THD< 0,2%)70v 450 WattsContinuous Rated Power (20-20 kHz, THD< 0,2%)8? 225 WattsCooling Front-to-Rear, continuously variable fansDIM 30 0.02 %Electronics Type AmplifierFrequency Response 15 Hz-30 kHzInput Impedance (Balanced) 20 kOInput Sensitivity 0 dBu (.775V)-2 Ω, +3dBu (1.1V)-4/8 Ω, +6 dBu (1.55) 70V/100VInput Sensitivity 0 dBu (.775V)-2 Ω,+3 dBu (1.1V)-4/8 Ω, +6 dBu (1.55) 70V/100VIntermodulation Distortion (SMPTE) 0.05 %Mains Voltage 220 - 240 V, 50 - 60 Hz or 120 V,50 - 60 Hz, 50 - 60 HzMaximum Bridged Output 4? 1000 WattsMaximum Bridged Output 8? 1000 WattsNetwork Control (IRIS-Net) OptionalSlew Rate 28 V/µsTotal Harmonic Distortion 0.05 %Variable Load Drive (VLD) YesHeight 2RU 88.1 mm (3.47")Width 481 mm (18.94")Depth 421.5 mm (16.59")Weight Net 11.1 kg (24.47 lbs) Electro-Voice CPS4.5 4-Channel Power Amplifier, 4x500W into 2 or 4 Ohms.