When you make a purchase through links on our site, we may earn an affiliate commission.
|
| Crown Audio CDi DriveCore 4-Channel 600W Power Amplifier, Analog Input CDIThe CDi DriveCore Series is an evolution in amplification, providing an impressive mix of high-performance; rich feature set and competitive cost. Using technology derived from our flagship Installed Sound amplifier (Crown DriveCore Install series), the CDi DriveCore 4|600 offers streamlined functionality to work in almost any medium sized installa... moretion such as cinema, houses of worship, bars, lounges and more.Designed for ease-of-use in a variety of applications, the 4|600 is a 4-channel amp that includes network control/monitoring, high-level DSP, front-panel interface and support for driving up to 100Vrms speaker loads without requiring a transformer. The entire CDi DriveCore line comes Adorama.comDelivery: in USA On order Report | $2,558.00 | | |
|
| Crown CDI DriveCore 4 600 4-Channel Power Amplifier, 600W at 4 Ohms, 70V CCDi DriveCore 4600 is a 4-Channel Amplifier with Analog Input and 600W per Output ChannelAn impressive mix of high performance, rich features, and competitive cost.The CDi DriveCore Series is an evolution in amplification, providing an impressive mix of high-performance; rich feature set, and competitive cost. Using technology derived from Crown&rs... morequo;s flagship Installed Sound amplifier (Crown DriveCore Install series), the CDi DriveCore 4600 offers streamlined functionality to work in almost any small/medium sized installation such as restaurants, retail stores, and more. Designed for ease-of-use in a variety of applications, the 4600 is a 4-channel amp that includes network control/monitoring, high-level DSP, front-panel interface, and support for driving up to 100Vrms speaker loads without requiring a transformer. The entire CDi DriveCore line comes pre-loaded with JBL speaker tunings to help make installations quicker and easier.FeaturesExclusive multi-patented DriveCore integrated circuit combines hundreds of discrete circuits into one chip for better performance, lower power consumption, and improved reliabilitySupports configuration and control using HiQnet® Audio Architect™Monitoring and control over TCP/IPColor LCD and front panel user interface for amplifier configuration, control, and monitoringProgrammable GPIO (general purpose input/output) control portDigital signal processing (Input/output EQ filters, crossover, input/output delay, LevelMAXTM limiters)Support for importing of FIR filter coefficients20 device presets – 1 factory and 19 user96kHz/32-bit floating-point signal processingUniversal power supply with PFC for reduced current draw and industry-leading efficiencyPower saving modesRemote power off – Sleep mode activated via AUX port70Vrms/100Vrms direct driveEach channel independently configurable for low z or high z operationAdvanced protection circuits – Amplifier and loads are protected against shorted outputs, DC, mismatched loads, overheating, over/under-voltage, and high-frequency overloadSpecificationsChannels: 4Sensitivity (for full rated power at 8 ohms): 0.7V RMSRated Power Output (per channel @ 4 ohms): 600WAnalog Input Signal to Noise Ratio (ref. rated power, 100V, 20Hz - 20kHz at 8 ohms): > 104dBTHD (full rated power, 20 Hz - 20 kHz): 0.35%Damping Factor (20 Hz to 100 Hz): > 1000Frequency Response (8Ω, 20 Hz - 20 kHz) +/-0.25dBCrosstalk (below rated power) 20 Hz to 1 kHz: > 80dBInput Impedance (nominally balanced, nominally unbalanced): 20 kΩ balanced, 10 kΩ unblancedDimensions (W x H x D): 19 x 3.5 x 12.25 in (48.26 x 8.89 x 31.12 cm) (depth not including 1.3 inch front panel protrusion)Weight: 16.3 lbs (7.39 kg)Power Supply Connector: 15A IEC connector, 100 – 240V Crown CDI DriveCore 4 600 4-Channel Power Amplifier, 600W at 4 Ohms, 70V. Fullcompass.comDelivery: in USA Report | $3,411.00 | | |
|
| Crown Audio CDi DriveCore 4-Ch 600W Power Amplifier, Analog + BLU link InpWhile the CDi DriveCore Series represents a significant advancement in audio amplification technology, the 4-Channel 600W Professional Power Amplifier stands out with its blend of high-performance capabilities, comprehensive features, and cost-effectiveness. Drawing on technology from Crown Audio's flagship Installed Sound amplifier, the DriveCore... moreInstall series, this professional power amplifier is designed to deliver superior sound quality in medium-sized installations, including cinemas, houses of worship, bars, and lounges.The 4|600BL model is a 4-channel amplifier equipped with network control and monitoring, high-level Digital Signal Processing (DSP), and a user-friendly front-panel Adorama.comDelivery: in USA On order Report | $2,858.00 | | |
|
| Crown CDI DriveCore 4 600BL 4-Channel Power Amplifier, 600W at 4 Ohms, 70VAn impressive mix of high performance, rich features, and competitive cost.The CDi DriveCore Series is an evolution in amplification, providing an impressive mix of high-performance; rich feature set, and competitive cost. Using technology derived from Crown’s flagship Installed Sound amplifier (Crown DriveCore Install series), the CDi DriveC... moreore 4600BL offers streamlined functionality to work in almost any small/medium sized installation such as restaurants, retail stores, and more. Designed for ease-of-use in a variety of applications, the 4600BL is a 4-channel amp that includes network control/monitoring, high-level DSP, front-panel interface, and support for driving up to 100Vrms speaker loads without requiring a transformer. The entire CDi DriveCore line comes pre-loaded with JBL speaker tunings to help make installations quicker and easier.FeaturesFour channelsNetwork control, DSP, ControlPort, BLU link600W per output channel @ 4 ΩPreloaded with JBL speaker tunings for quick, easy installsRated for 2, 4, 8, and 16 Ω loadsSpecificationsPlease see attached documentation for product specifications Crown CDI DriveCore 4 600BL 4-Channel Power Amplifier, 600W at 4 Ohms, 70V, Blu-Link. Fullcompass.comDelivery: in USA Report | $3,796.00 | | |