Alpine PWV-SB10

Bring your music to life with the Alpine PWV-SB10, a high-performance 10" powered subwoofer built for deep, impactful bass. With a powerful built-in amplifier delivering 400W RMS (200W x 2) and a dual 4-ohm voice coil design, this subwoofer delivers strong, controlled low frequencies with impressive clarity. Engineered with a sealed enclosure and... morea wide frequency response of 31–200 Hz, the PWV-SB10 ensures tight, distortion-free bass that enhances any genre of music. Fine-tune your sound with a variable low-pass filter (50–200 Hz), phase selector (0°/180°), and a remote level control for on-the-fly adjustments. Whether you're upgrading a factory system or building a custom setup, the PWV-SB10 offers clean, powerful bass and flexible tuning in one sleek package—the perfect blend of Alpine quality and low-end performance. Specifications: Performance Amplifier Power Output RMS Per Channel, Ref.: 4 ohm, 14.4V: 400 W (200 W x 2) Speaker Diaphragm size nominal 10 inch (25 cm) Speaker Impedance Dual Voice Coil 4 Ohm + 4 Ohm Speaker Power Handling RMS/Peak: 200W + 200W/400W + 400W Frequency Response +0/-3dB: 31-200 Hz Enclosure Type: Sealed Control Input Impedance: >10 kOhms Input Sensitivity RCA Input Ref.: Rated Power into 4 Ohms: Hi Level: 0.5 - 10V. Lo level: 0.2 - 2.0V Phase Selector 2 position: 0°/180° Crossover Variable LPF: 50 - 200 Hz (-24 dB/oct.) Remote Level Linear Attenuation 0 to -20dB General Dimensions Width: 470mm (18 1/2") Height: 282 mm (11") Depth without grille: 126 mm (5") Depth including grille: 170 mm (6 3/4") Weight: 9.7 kg (21 lb 6.4 oz)

Bring your music to life with the Alpine PWV-SB10, a high-performance 10" powered subwoofer built for deep, impactful bass. With a powerful built-in amplifier delivering 400W RMS (200W x 2) and a dual 4-ohm voice coil design, this subwoofer delivers strong, controlled low frequencies with impressive clarity. Engineered with a sealed enclosure and... morea wide frequency response of 31–200 Hz, the PWV-SB10 ensures tight, distortion-free bass that enhances any genre of music. Fine-tune your sound with a variable low-pass filter (50–200 Hz), phase selector (0°/180°), and a remote level control for on-the-fly adjustments. Whether you're upgrading a factory system or building a custom setup, the PWV-SB10 offers clean, powerful bass and flexible tuning in one sleek package—the perfect blend of Alpine quality and low-end performance. Specifications: Performance Amplifier Power Output RMS Per Channel, Ref.: 4 ohm, 14.4V: 400 W (200 W x 2) Speaker Diaphragm size nominal 10 inch (25 cm) Speaker Impedance Dual Voice Coil 4 Ohm + 4 Ohm Speaker Power Handling RMS/Peak: 200W + 200W/400W + 400W Frequency Response +0/-3dB: 31-200 Hz Enclosure Type: Sealed Control Input Impedance: >10 kOhms Input Sensitivity RCA Input Ref.: Rated Power into 4 Ohms: Hi Level: 0.5 - 10V. Lo level: 0.2 - 2.0V Phase Selector 2 position: 0°/180° Crossover Variable LPF: 50 - 200 Hz (-24 dB/oct.) Remote Level Linear Attenuation 0 to -20dB General Dimensions Width: 470mm (18 1/2") Height: 282 mm (11") Depth without grille: 126 mm (5") Depth including grille: 170 mm (6 3/4") Weight: 9.7 kg (21 lb 6.4 oz)