Pliers, Wire Cutters & Cable Cutters

Manufactured with an up to 20 percent lighter advanced skeleton design, this demo bar is perfect for many applications including framers and roofers removing nails, clapboard siding, or plywood, or for general demo work. This bar is made to be extremely versatile and durable with multiple nail pullers for improved leverage. The 20 percent lighter-yet-durable carbon-steel of this tool gives credit to the comfortability of its grip, and the dual strike zones are designed for accurate and rapid nail extraction on any jobsite.

Light weight saw will tension up to 20000 pounds per square inch. Front tension mechanism is easy to hold and adjust. Mount blade at 90 degree for flush cutting applications. Comes with one 12 inch, 24 TPI hacksaw blade.

Smith's 6 in. dual grit double sided whetstone offers 400 grit and 1,000 grit in one stone. The new 6 in. x 1.75 in. sized whetstone rests in a plastic base and has a plastic lid to protect the stone when not in use. During use, the plastic lid can be inserted into the bottom of the stone base to extend the height of the base and make sharpening your knife safer. The user's fingers grip lower on the base and remove any chance of cutting your fingers when pulling or pushing the knife's cutting edge across the sharpening surface.

This attractive blue Estwing 18 in. I-Beam Construction Pry Bar is fully forged from fine tool steel. The I-beam construction gives this bar exceptional strength in a lightweight design for easy handling. One end features a narrow blade for easy prying, while the other end has a beveled nail slot and nail puller that enables you to access hard-to-reach areas. The rocking head provides maximum leverage to remove troublesome, embedded nails with ease.

The 3-piece Pry Bar Set is built for the most demanding prying applications. The set includes three pry bars, all with custom-grip, patented ergonomic and composite handles for comfortable use and solid hold. Made with corrosion-resistant black oxide and hardened, tempered shafts, this set is built to last for both the pro and do-it-yourselfer.

"Quickly change between 1/4 in. and 5/16 in. hex sizes with Malco's unique, exclusive, dual-sided magnetic hex drivers. The reversible hex socket fits over a 1/4 in. magnet-tipped, ball locking hex shaft and can be quickly reversed to change sizes. Eliminate troublesome buildup of metal shavings in the hex tip with the ""Easy Clean Magnet"". Just swipe with a glove or shop towel to clear any metal shavings. Tested torque of the reversible hex chuck driver design is equal to one-piece drivers."

This compact tool kit contains the most useful tools for basic DIY household repairs. Picture hanging, box opening, screw tightening, this is the perfect starter kit for home repairs.

Delivering pro performance with every cut, Fiskars Pro TrueTension Hacksaw features a TrueTension blade tensioning mechanism that 'clicks' into place for total confidence and optimal tensioning every time you use it. With no loose parts and quickly accessible on-tool blade storage, blade changes are faster and easier. The spare blade also locks into the cutting position at the frame's top-front end for clean cuts in tight spaces. The metal frame is engineered for superior durability. Advanced ergonomics include an oversized handle for bare or gloved hands and SoftGrip with innovative texturing to displace moisture, prevent blisters and increase traction. A secondary grip point at the saw’s fr…

Stripping Bar, Hexagonal, 8lbs, 42-Inch. For prying, lifting and pulling nails. Hardened and tempered claw and chisels. Press forged and heat treated for extra durability .

Until the industrial revolution changed the way go

Klein Tools 2-Piece Multi-Bit Screwdriver/Wire Stripper Set contains a general purpose 11-in-1 multi-bit screwdriver (32500) and a compact solid and stranded wire stripper (11055). The versatile 11-in-1 multi-bit screwdriver tool has an integrated screwdriver / nut driver shaft that holds 8 popular tips and converts to 3 nut driver sizes (#1 and #2 Phillips, 1/4 in. and 3/16 in. slotted, T10 and T15 Torx, #1 and #2 square recess and 3/8 in., 5/16 in. and 1/4 in. nut drivers). Furthermore, its cushion-grip handle allows for excellent grip, comfort and torque-delivery. The compact, lightweight wire stripper and cutter with double-dipped comfortable curved handles cuts cleanly through solid and …

The heat treated Spring Steel Wrecking Bar is quite durable and excellent for heavy demolition jobs. It has a lightweight design for ease of use as well as precision-ground edge that is 25% wider than traditional FatMax Wrecking Bars for better leverage.

Ideal for any prying or lifting, our 24 in. Dominator Economy Pry Bar is tough, dependable, and reliable. These pry bars are heat treated along the entire length of the steel and offer an ergonomically designed, single shot handle.

3/4 NPT tap size fits 1/2-Inch (13 mm) and 3/4-Inch (19 mm) bender heads. Made from high-strength steel to eliminate flex and provide excellent feel, control and leverage. Bright orange color is easy to spot on jobsites. * *

Tackle your next renovation or demolition project with the latest innovations from Crescent. Our new tools are designed around powerful innovations that allow the user to attack projects from the best angle, adjust your tool to fit the task at hand, and just get the job done faster and easier than before. This series of tools offers a wide array of demolition and renovation tools. All Crescent pry bars have precision ground edges that make it easier to access tight spaces and help minimize damage to finished areas, as well as a crow bar end with a nail puller slot for standard crow bar use. Durable two-tone dual material grips provide comfort, control, and added safety.

The Crescent Wiss Straight Handle Hand Seamer is a powerful tool for bending or flattening sheet metal by hand. It utilizes an optimal handle span to deliver maximum power from an ergonomic operating range, and features non-slip cushion grips for superior comfort and control.

Eliminate sharp edges on trimmed cable ties with the Craftsman V-series flush cut plier. Flush cutting blades provide a clean, flush cut of cable ties reducing the sharp edges normal cutting pliers leave behind. When you're done with the job you can clean up oil and grease more easily from the smooth dipped grip handles.

The heat treated Spring Steel Wrecking Bar is quite durable and excellent for heavy demolition jobs. It has a lightweight design for ease of use as well as precision-ground edge that is 25% wider than traditional FatMax Wrecking Bars. The heat treated Spring Steel Wrecking Bar is quite durable and excellent for heavy demolition jobs. It has a lightweight design for ease of use as well as precision-ground edge that is 25% wider than traditional FatMax Wrecking Bars for better leverage.

The Trim Puller is designed specifically for repair or remodel projects where you are not destroying but rather reusing your trim, cabinets, flooring and other materials. What sets the trim puller apart from other tools is the contact area combined with the 15 degree wedged center for easy extraction. The Trim Puller has the largest and flattest contact area versus the single contact areas found on a pry bar or a claw. No shim or small board spacer is needed. It is made from durable 48Rc steel and includes an impact absorbing comfort grip handle. So stop damaging walls and get yours today.

"Sleek styling, easy blade replacement and larger handles make the Andy Snip more versatile. A sleek head design improves maneuverability. Ideal for making cuts in tight material, shapes such as J-Channel. A full 3"" (76.2 mm) cutting length makes straight shearing with the Malco Andy Snip fast and easy. Blade replacement is easily accomplished in the field."

Head indexes over 180 degree and locks into 16 positions for increased access 90 degree flat head offers better access and wider support for prying against surfaces, striking pas assists users with penetration and prying.

Estwing’s drywall hammer has a bonded and molded shock reduction grip that reduces shock up to 70% and will not come off. Estwing hammers are the only hammers that can make this claim. The head and handle are forged in 1-piece solid steel and are fully polished. Scored and rounded face for easy and proper nail driving, blade edge for scoring drywall. For drywall application scored and rounded face for easy and proper nail driving blade for scoring drywall. Protect your eyes from flying particles and dust. Always wear safety goggles. Bystanders shall also wear safety goggles.

Tackle your next renovation or demolition project with the latest innovations from Crescent. Our new tools are designed around powerful innovations that allow the user to attack projects from the best angle, adjust your tool to fit the task at hand, and just get the job done faster and easier than before. This series of tools offers a wide array of demolition and renovation tools. All Crescent pry bars have precision ground edges that make it easier to access tight spaces and help minimize damage to finished areas, as well as a crow bar end with a nail puller slot for standard crow bar use. Durable two-tone dual material grips provide comfort, control, and added safety.

The Milwaukee Aviation Snips are built for long life and durability. Forged blades deliver up to 10X more cuts than cast blades. The flush pivot bolt will not hang up on material for easy use. The metal lock secures the tool for storage and is easily operated with 1 hand. The offset models features a 45 deg. offset handle for clearance over the cut material. The 2pc set includes Left Offset and Right Offset Aviation Snips.