Submersible (Drainage) Pumps

Ebara EPD-3AS1 Automatic Sump Pump Stainless Steel TDH: to 62 Ft. - GPM: to 88 GPM

OPTIMA Pro Drainer submersible pumps are the ideal pumps for slurry or semi-dirty water

Constructed of high quality, corrosion resistant 304 stainless steel, Oil lubricated double mechanical shaft seal, Air filled, continuous duty motors rated for up to 20 starts per hour, Built-in thermal protection with automatic reset (Single Phase Only), Built to operate with full or partial submergence (Optima pumps are available with an optional Low Suction Device), Vertical discharge allows pumpage to carry heat away from the motor

Key Features: Constructed of high-quality, corrosion resistant 304 stainless steel. Motor is 2 pole submersible, rated continuous duty 104°F maximum fluid temperature continuous operation, fully submerged. 140° F intermittent operation, NPT thread discharge, Double mechanical seal with viton elastomers, Shielded pre-lubricated ball bearings, Single channel impeller, Thermal overload protection QDC system

This pump has a 2" NPT threaded discharge

Key Features: Constructed of high-quality, corrosion resistant 304 stainless steel. Motor is 2 pole submersible, rated continuous duty 104°F maximum fluid temperature continuous operation, fully submerged. 140° F intermittent operation, NPT thread discharge, Double mechanical seal with viton elastomers, Shielded pre-lubricated ball bearings, Single channel impeller, Thermal overload protection QDC system

Key Features: Constructed of high-quality, corrosion resistant 304 stainless steel. Motor is 2 pole submersible, rated continuous duty 104°F maximum fluid temperature continuous operation, fully submerged. 140° F intermittent operation Automatic float switch, NPT thread discharge, Double mechanical seal with viton elastomers Shielded, pre-lubricated ball bearings Single channel impeller Thermal overload protection QDC system

Key Features: Constructed of high-quality, corrosion resistant 304 stainless steel. Motor is 2 pole submersible, rated continuous duty 104°F maximum fluid temperature continuous operation, fully submerged. 140° F intermittent operation, Automatic float switch, NPT thread discharge, Double mechanical seal with viton elastomers, Shielded pre-lubricated ball bearings, Single channel impeller, Thermal overload protection QDC system

CONNECTS: to 1-1/4-inch or 1-1/2-inch sump pump discharge pipe INCLUDES: ABS and rubber construction with stainless steel clamps FEATURES: Durable and efficient Rubber slip fit connections FULL-FLOW: Design maintains performance of sump pump WEIGHTED: Flapper valve insures seal to prevent pump cycling

PUMPS: Up to 102 GPM / 6100 GPH and up to a maximum vertical lift of 35-feet HEAVY-DUTY: Cast iron and stainless steel construction provides ultimate durability and longevity CAST IRON: Rugged impeller prevents clogging and will handle up to 1/ 2 in. solids FEATURES: Vertical float switch with piggy-back plug tested to over 3 million on/off cycles WARRANTY: 10-Year

Pumps up to 2500 GPH and up to a maximum vertical lift of 28 feet. Fiberglass reinforced thermoplastic construction is durable, lightweight and easily portable. Durable impeller & removable intake screen prevents clogging and will handle up to 3/8 in. solids 1-1/4 in. FPT discharge with a 3/4 in. garden hose adapter included Thermally protected motor resists overheating and increases the life of the pump.

Pumps up to 4000 GPH and up to a maximum vertical lift of 26 feet Fiberglass reinforced thermoplastic construction is durable lightweight and easily portable. Impeller & removable intake screen prevents clogging and will handle up to 3/8 in. solids 10 foot Vertical piggy-back float switch. 1-1/2 in. FPT discharge ready to install in most existing applications.

The 00752078 is a genuine Bosch Sump w/ Drain Check Valve. The Bosch 00752078 Sump w/ Drain Check Valve fits the following brands of dishwashers: Bosch The Bosch 00752078 helps to control the flow of water into the drain pump of your dishwasher. The 00752078 replaces: 752078 If the Sump is broken or cracked, it can mean that leaks and further damage are occurring. Replace a damaged sump right away to keep your machine running smoothly. It is recommended to either refer to your appliance service manual, contact your appliance manufacturer, or contact a service professional to validate the needed part number for your appliance prior to purchasing.

Pumps up to 2300 gallons per hour, with a maximum vertical lift of 27 ft. Strong thermoplastic construction is durable and lightweight. Impeller & removable intake screen prevents clogging and will handle up to 1/8 in. solids. Adjustable tethered piggy-back float switch. 1-1/4 in. FPT discharge with 1-1/2 in. FPT discharge adapter included for installation flexibility.