Other for Computer Monoprice

High quality, high value, Serial (DB9) Straight, Extension Cables.

A reliable and economical solution for extending your pre-existing serial cables.
High quality molded connectors.
Beige color.


*Monoprice continually strives to improve its product line to bring our customers the best products available. Therefore, changes may be made to listed specifications without prior notice. Item received may not match photo or specs shown.

Warning: This product may contain a chemical known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov

These screws are for use with equipment/relay racks that are tapped for 12/24 screws. Each order includes 50 screws.






Monoprice™ and all Monoprice logos are trademarks of Monoprice Inc.


Updated Aug 24, 2021

Female to Female Stereo Coupler to connect two Male TRS plugs together. Convenient way to patch together two cables.*Monoprice continually strives to improve its product line to bring our customers the best products available. Therefore, changes may be made to listed specifications without prior notice. Item received may not match photo or specs shown.

Enjoy incredibly bright and colorful light output with minimal power draw and less heat for the performer and audience. Easily put light where you want, how you want, with manual focus plus zoom and frame shutters. Set‑and‑forget with onboard function control of brightness, color, and strobe or use 9‑channel DMX control as part of a stage lighting grid. There are no color gels to wear out or require climbing the rafters to change. Even multiple units in an intimate theater or church will not disrupt the audience thanks to the near silent‑running internal cooling fan.
The 612754 stage light provides support for standard size "B" Gobo holders. The 612754 …

This Wall Mount Bracket is ideal for situations when you want to mount one or two pieces of equipment, but don't want use an entire relay rack. This bracket mounts to a wall using standard 16" spaced studs or to a brick/cement wall. This bracket is tapped for 10/32 screws and includes 12 such screws..gte-ctr .row{margin:0;}




1 Year Replacement Warranty
Monoprice™ not only stands behind every product we sell with a 1 year replacement warranty, we offer a 30 day money back guarantee as well! If the product you purchase does not satisfy your needs, send it back for a full refund.


30 Day Money Back Guarantee
Monoprice™ stands behind every product we sell with a 30 day …

This Wall Mount Bracket is ideal for situations when you want to mount a single piece of equipment, but don't want use an entire relay rack. This bracket mounts to a wall using standard 16" spaced studs or to a brick/cement wall. This bracket is tapped for 10/32 screws and includes 6 such screws.






Monoprice™ and all Monoprice logos are trademarks of Monoprice Inc.


Updated Aug 24, 2021

DataComm Electronics' Brush Plate Décor Insert is used to install low voltage cables behind your HDTV, amplifier, or other audio or video devices. The Brush Plate Décor Insert is designed to be installed into a low voltage mounting bracket (sold separately) that is installed into the wall.
Features:
- Low profile design fits behind the industry's thinnest mounts and TVs
- Conceal multiple low voltage cables behind your flat panel TV
- Easily holds up to 6 cables
- Mounts flush with a décor style wall plate (included)
- Mounts to a standard low voltage mounting ring, old work ring, or mud ring


Support Files:
- Features Sheet (Oct 10, 2022)


Warning: This …

Install wall plates without the need for a full in-wall electrical box using this 1-Gang Low Voltage Mounting Bracket from Monoprice™!
This mounting bracket allows you to install a wall plate for use with low-voltage cables, such as audio, video, and network cable connections. The bracket can be adjusted to fit drywall/paneling from 1/4" to 1" thick. The bracket measures 2.2" x 3.6" and is both UL® and CSA® certified.
Note: The color indicated can vary in tone and/or hue between production runs and manufacturing facilities. The color of this item may not be an exact match to any other product, even if they are indicated as being the same color, whether sold by Monoprice or any …

Connect up to eight channels of audio between equipment with 1/4-inch TRS jacks using this 8-Channel 1/4-inch TRS Male to 1/4-inch TRS Male Snake Cable from Monoprice!
This snake cable features eight balanced mono or unbalanced stereo lines with color coded wires (red, white, green, yellow, black, blue, gray, and brown). Each wire is constructed of a pair of 26 AWG conductors with aluminum foil shielding to protect from stray EM and RF interference.
The wires at each end are terminated in 1/4-inch TRS plugs.

Warning: This product may contain a chemical known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information,…

This is a white HDMI® wall plate with support for the HDMI® Ethernet channel, which delivers Ethernet data interconnectivity through the 4 inch coupler cable on the rear of the plate. This convenient wall plate has a female connector on the front and in back for easy installation. Eliminate cable clutter by hiding your cables in-wall. This clean looking wall plate will give your home theater a professionally installed look. Complies with optional HDMI® Ethernet Channel specification.
The HDMI cable lead is 28 AWG.

*Monoprice continually strives to improve its product line to bring our customers the best products available. Therefore, changes may be made to listed specifications …

A single 200‑watt Warm White Ultra Bright LED provides the light output of a 750‑watt halogen bulb with less fan noise, heat on performers and audience, and power consumption. The COB design improves light distribution, whether it's used via DMX as part of a stage lighting grid or with onboard control of brightness and strobe for set‑and‑forget operation.
This ellipsoidal's heavy duty housing supports rigorous road use, with manual focus and frame shutters for versatile light placement. This is a professional‑grade lighting fixture for churches, theaters, clubs, artistic installations, video productions, and other events where crisp bright, …

Monoprice™
20‑Channel Snake & 16 XLR x 4 TRS Stage Box ‑ 100 feet
25AWG Conductors and Features 16 Downstream and 4 Upstream Connections
Connect your mixing board to your stage performers with this 100 foot 20‑channel XLR/TRS Snake with 16x4 Stage Box from Monoprice™!

This professional audio snake uses 25AWG conductors and features 16 downstream and 4 upstream connections. The heavy duty stage box measures 12.6" x 6.9" x 2.9". It has 16 female XLR and 4 female TRS connectors, a convenient handle on one end, and mounting holes so it can be secured to a wall or floor position.

The XLR connectors have metal bodies with plastic sleeves and rubber strain relief …

This home theater plate provides all the flexibility that a professional installer or experienced do-it-yourselfer needs to create a sophisticated media environment. The plates are easy to terminate and contribute to a neat looking and finished installation. Clear labeling also simplifies room set up and configuration.

Please Note: The subwoofer connection is an RCA connector on the front and an RCA connector on the back. This product can be used with either banana plugs (product ID 2801 or 2943) or it can accept bare wire connections on both the front and rear of the plate. Note: Not compatible with DUAL banana plugs like PID# 2944 & 2945. Works fine with individual single banana plugs.…

This pre‑configured plate comes with front and back gold plated push‑pin banana plug connectors.
Features:
- Eliminates tedious work and decreases labor cost by 20%
- No wire pull‑outs
- Automatic conductor adjustment ensures perfect conductivity every time
- Connector labeling simplifies room setup and configuration
- 7 front and rear banana plug connection pairs for 7 speakers
- 2 front and rear RCA connections for 2 subwoofers
- Can accept bare wire connections on both the front and rear of the plate
- Measures 3.8" x 3.6"

Notes:
- Not compatible with DUAL banana plugs, such as P/Ns 2944 and 2945. Works fine with individual single banana plugs, such as P/Ns …

Give your in-wall low-voltage cable installation a professional appearance using this 2-Gang Recessed Low Voltage Cable Wall Plate from Monoprice!
This 2-gang wall plate features a 2.9" x 1.9" opening in the face for routing a low-voltage cable into a wall. It requires the use of a 2-gang, low-voltage mounting bracket (not included).


Support Files:
- Dimensions Diagram (Aug 10, 2009)



Enable GingerCannot connect to Ginger Check your internet connection
or reload the browserDisable GingerRephraseRephrase with Ginger (Ctrl+Alt+E)Edit in GingerGinger is checking your text for mistakes...Disable Ginger in this text fieldDisable Ginger on this website×…

Wall plate for use in conjunction with gang box and keystones. Use appropriate keystones to create a nicely finished, professionally installed look for Ethernet networks or Home Theater interconnects. Eliminate that cluster of wires and hide them behind a wall.


*Monoprice continually strives to improve its product line to bring our customers the best products available. Therefore, changes may be made to listed specifications without prior notice. Item received may not match photo or specs shown.
The color indicated can vary in tone and/or hue between production runs and manufacturing facilities. The color of this item may not be an exact match to any other product, even if they are …

This is a white dual port HDMI® wall plate with support for the HDMI® Ethernet channel, which delivers Ethernet data interconnectivity through the 4 inch coupler cable on the rear of the plate. This convenient wall plate has a female connector on the front and in back for easy installation. Eliminate cable clutter by hiding your cables in-wall. This clean looking wall plate will give your home theater a professionally installed look. Complies with optional HDMI® Ethernet Channel specification.
The HDMI cable lead is 28 AWG.

*Monoprice continually strives to improve its product line to bring our customers the best products available. Therefore, changes may be made to listed specifications …

This wall plate is made of high quality zinc alloy metal and features two XLR ports that fit cables snug while providing a clean connection for crisp and clear sound reproduction. This wall plate looks just as great as it will make your audio sound.

Warning: This product may contain a chemical known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov

The Entegrade™ Series False Ceiling Equipment Storage Enclosure stores A/V and IT components above the false ceiling to provide a clean, organized room environment. It replaces half standard ceiling tile and feature a perforated door panel, which has the appearance of a standard HVAC return register when closed. It features multiple knockouts for ultimate flexibility and a lock and keys are included to ensure the security of any installed components.Standard SizingMultiple KnockoutsLocking Door Panel


Standard Sizing: The storage enclosure replaces half standard ceiling tile, making it compatible with most commercial drop ceilings.
Multiple Knockouts: It features multiple knockouts …

This home theater plate provides all the flexibility that a professional installer or experienced do-it-yourselfer needs to create a sophisticated media environment. The plates are easy to terminate and contribute to a neat looking and finished installation. Clear labeling also simplifies room set up and configuration.

Please Note: The subwoofer connection is an RCA connection on the front and an RCA connector on the back. This product can either be used with banana plugs (product ID 2801 or 2943) or it can accept bare wire connections on both the front and rear of the plate. Note: Not compatible with DUAL banana plugs like PID# 2944 & 2945. Works fine with individual single banana plugs.…

This home theater plate provides all the flexibility that a professional installer or experienced do-it-yourselfer needs to create a sophisticated media environment. The plates are easy to terminate and contribute to a neat looking and finished installation. Clear labeling also simplifies room set up and configuration.

Please Note: The subwoofer connection is an RCA connection on the front and an RCA connector on the back. This product can either be used with banana plugs (product ID 2801 or 2943) or it can accept bare wire connections on both the front and rear of the plate. Note: Not compatible with DUAL banana plugs like PID# 2944 & 2945. Works fine with individual single banana plugs.…

So you just got a new, larger screen TV and it won't fit on your existing wall mount? No problem! As long as the mount can handle the weight of the new display, you can use this Wall Mount Bracket Universal Adapter from Monoprice™ to adapt your existing mount to the VESA size needed for your new TV.
This adapter bracket includes holes for VESA® 50x50, 75x75, 100x100, 200x100, and 200x200, allowing you to adapt from one size to another.






Support Files:
- Dimensions Diagram (Sep 18, 2017)


Monoprice™ and all Monoprice logos are trademarks of Monoprice Inc.
VESA® is a trademark owned by the Video Electronics Standards Association (VESA®) in the United …

So you just got a new, larger screen TV and it won't fit on your existing wall mount? No problem! As long as the mount can handle the weight of the new display, you can use this Wall Mount Bracket Universal Adapter from Monoprice™ to adapt your existing mount to the VESA size needed for your new TV.
This adapter bracket includes holes for VESA® 50x50, 75x75, 100x100, 200x100, 200x200, and 400x200, allowing you to adapt from one size to another.






Support Files:
- User's Manual (Oct 30, 2017)
- Dimensions Diagram (Oct 30, 2017)


Monoprice™ and all Monoprice logos are trademarks of Monoprice Inc.
VESA® is a trademark owned by the Video Electronics Standards …

This Digital Coax Cable is made from premium quality RG-6/U with double copper braid shielding to prevent signal degradation caused by EMI and RFI interference. This cable is ideal for conducting S/PDIF digital audio signals and other high-bandwidth content, but it can also be used for composite video and other line level RCA signals.
This splitter features a single RCA female jack on one end and a pair of RCA male plugs on the other end. The purpose of this is adapter to split a single RCA output to send to two RCA inputs.
Note that this should be used only as a splitter. Combining audio signals could result in damage to your audio equipment. The proper way to combine audio signals is through …