Other Network Equipment LR-LINK

10Gb Network Card Ultra Fast Speed 10G SFP+ ports let you connect to 10Gb/s SFP+ transceiver module/DAC/AOC and upgrade your ethernet speed to 10Gb/s Stable Performance Equipped with the original Intel 82599 controller which supports I/O virtualization and effectively prevents packet loss, makes the servers more stable Comprehensive System Support Fully compatible with Windows Server 2003/ 2008/ 2012, Windows7/ 8/ Visa, Linux, VMware ESX, to meet your diverse operating system needs in datacenter

1. A fiber 25G ethernet network adapter based on Intel E810 chips. 2. Four 1/10/25Gb E SFP28 ports deliver multiple high speed connections. 3. Dynamic Device Personalization (DDP) 4. Supports both RDMA i WARP and Ro CEv2 5. Application Device Queues (ADQ) 6. IEEE 1588 Precision Time Protocol (PTP)

·Low cost, low power,energy-efficient Ethernet. ·1 Gbps to 10 Gbps, 5 Gbps, 2.5 Gbps and 100M data rates. ·Jumbo frame support up to 16 KB. ·Extensive software support: Windows and Linux drivers; UEFI and PXE remote boot. ·PCI Express (Pcle) v 3.0 x4 lanes. ·MSI, MSI-X, LSO, RSS and IPv4/IPv6 checksum offload.

1, Single port POE output power up to 30W. 2, Adaptive to external device required power output: Class 0, Class 1, Class 2, Class 3, Class 4; 3, The adapter card adopts wider RJ45 spacing design; 4, Added independent POE switch, and each port is equipped with surge protection; 5, Added efficient cooling fan, fan speed 4000PRM, life up to 50,000 hours; 6, Bigger heat sink can effectively solve the problem of heat dissipation of the adapter in the case of poor heat dissipation environment, and eff

1. The adapter card adopts a wider RJ45 spacing design; 2. The interface specially designed for industrial cable access, 3. The efficient radiator can effectively solve the problem of heat dissipation of the adapter in the case of poor heat dissipation environment, and effectively ensure the stable operation of the adapter card for a long time; 4. carefully selected the thickened gold sink RJ45 connector to ensure more solid and reliable connection; 5. 2* 8-pin RJ45 connector design can better s

Single Port 1GBE adapters PCI Express (PCle)v2.1,2.5GT/s, x1 lanes PXE, SCSl boot IEEE 802.3az 1GEthernet Specification Compliance Data Plane Development Kit (DPDK)support Low profile and full-height bracket

Single-port 100Mbps adapter PCI Express (PCle)1.1,2.5 GT/s,x1 lane SFP Connectivity IEEE 802.1p*, Intel(R) Priority Packet 8 Low-cost, low-power support PXE MSI-X support Excellent small packet performance for network appliances and Network Functions Virtualization(NFV) Low Profile and full-height bracket

Intel controller: The 100g dual-port network card is based on the original Intel E810 controller, is supplemented by the expansion function of hardware acceleration data packet processing, and the application queue technology is introduced. PCI Express v4.0 x16, compatible with PCI Express v3.0. Supported operating systems: Windows Server 2016 R2/2019 R2; Linux Stable Kernel version 4.x/5.x or later; Cent OS/RHEL 7.x or later; Ubuntu 16.x or later; VMware ESX/ESXi 5.x/6.x or later. Technical Sup

Dual Port 1000Mbps adapter PCI Express v2.1 X1 lane SFP connectivity Preboot Execution Environment(PXE) Support Jumbo Frame up to 9KB Low-profile and full-height brackets

Dual port Gigabit fiber adapter Mini PCIe slot SFP Connectivity PXE boot and 9KB jumbo frame support Low profile and full-height bracket

High-performance, self-configuring 10/100/1000Mbps connection for PCI Express* slots Easy installation, maintenance, and adv management capabilities Low-cost, low-power, compact design

LR-LINK's PCI Express Dual Port Copper Gigabit Ethernet Bypass Server adapter is PCI-Express X4 Copper Gigabit Ethernet network interface card that is based on a single chip, non-Bridged Dual port GBE controller. LR-LINK's Dual Port Gigabit Ethernet Bypass server adapter supports Normal, Disconnect and Bypass modes. In Normal mode, the ports are independent interfaces. In Bypass mode, all packets received from one port are transmitted to adjacent port. In Disconnect mode, the adapter simulates s

The LREC9804BF-4SFP+ adapter delivers superior performance in a PCI Express v3.0 x8 slot. Optimized performance vectors and key uses include: Small Packet Performance: Achieves wire-rate throughput on smaller payload sizes ((>128 Bytes for 40 Gb E and >64 Bytes for 10 Gb E) Bulk Transfer Performance: Delivers line-rate performance with low CPU usage for large application buffers Network Virtualization: Network virtualization overlay offloads including Geneve, VXLAN, and NVGRE Storage Performance

LRES2001PT-POE is single-port copper Gigabit Ethernet PCI Express x1 Po E industrial adapter based on Inetl I210 chip independently developed by Shenzhen Lianrui Electronics Co, Ltd, compatible with PCIe x4, x8, and x16 channels. This server adapter is mainly designed for industrial field visual inspection servers and devices, visual field clients, fast Ethernet data transmission equipment etc, as well as general servers.

LR-LINK has made a unique design for the adapter: 1. Single Port Po E output power maximum 30W 2. Support External Access Equipment output power: Class 0,Class 1,Class 2,Class 3 3. The Adapter adopt RJ45 spacing design; 4. The interface designed for industrial cable access, with the LR-LINK customized industrial Ethernet cable, can lock copper cable and RJ45 more stably, effectively solve the problem of the instability of industrial sites RJ45 connection copper cable, and be compatible with stan

LR-LINK makes a unique design for this Po E network card: 1. The single-port Po E output power consumption is up to 30W, providing a power supply interface for the external large 4Pin power. 2. The power output of adaptive to external equipment: Class 0, Class 1, Class 2, Class 3; 3. The Po E adapter card is designed with wider RJ45 spacing. 4, specially designed for industrial cable access interface, the collocation of LR-LINK customized industrial Ethernet cable, can a more stable locking copp

Delivers full line-rate 10Gb E performance across all ports. Consolidates network traffic and storage traffic over converged 10Gb E connections. Boosts host CPU efficiency with hardware offload for network (TCP/IP) and storage (FCo E/i SCSI) data traffic. Streamlines administrative tasks: Broadcom Advanced Co nt ro l S u i te ( BAC S ) m a n a g e m e nt a p p l i c at i o n a n d integration into HP's Virtual Connect and HP Pro Active Insight architecture. I m p rove s re l i a b i l i t y a n