Mixing Desks ART

Problem: You need to add 3 mics to a mixer, which only has one available channel.Solution: Insert a ProMIX between the mics and the mixer. Each mic channel on the ProMIX has both phantom power and low-frequency cut selectable via DIP switches plus a level control. The balanced XLR line output can be connected to a mic input on the mixer and headphones or a powered monitor can be connected to the Phone/Aux output. And if AC power is not available, the ProMIX runs on batteries as well.SpecificationsMaximum Gain: +60dBInput Impedance: 600 ohmsMaximum Input Level: -14dBMaximum Output Level: +14dBOutput Impedance: 600 ohmsTotal Harmonic Distortion: 0.02%Low Cut: -3dB @ 100 HzClip Headroom: 3dBOutput …

The ART MX821S is a versatile rack mount mixer combining eight independent input channels into a stereo line-level output. Each input channel accepts a balanced XLR microphone input or unbalanced 1/4” TS line-level signal and provides independent level and pan controls. +48 Volt phantom power may be independently selected on each microphone input. A master level control adjusts the signal output to the low-impedance balanced 1/4” TRS jacks. Prefade output (not affected by the master level control) and Aux Bus input RCA jacks allow patching of multiple units when more channels are needed The ART MX821S may be used on stage, in the studio, or for permanent install applications including …

The ART MX624 6-hannel stereo mixer with 2 zone outputs is a rack mount mixer that combines six independent input channels and routes them to two stereo zone outputs.The first channel can be used to control, via a front-panel switch, a ducking feature for all other channels making it an ideal solution for paging systems. All six channels can accept unbalanced stereo line-level signals. 48v phantom power can be independently assigned for each mic channel. Each channel has independent level controls and can be independently routed to either zone output, both or neither. Separate level, bass and treble controls adjust the sound of each zone output. Two bus inputs allow patching of multiple units …