Car Amplifiers

4-Channel Amplifier/ 100W x 4 @ 4 Ohms/ 150W x 4 @ 2 Ohms/ High-Efficiency Digital Circuit Design/ Hi-Res Audio Playback (192kHz/24Bit)/ 10-60kHz (-3dB) Frequency Response/ Variable High Pass / Low Pass Crossover/ Auto-Turn On With Remote Sensing/ Black Finish

Up to 85% efficiency thanks to ADC (Advanced D-Class) output stage
USS (Universal Speakers Simulators) allows SP 4.900 to work with head units featuring the “speaker load detection” circuit
160 x 4 RMS (4Ω) with ultra-compact size (211.6 x 130 mm)
IP55 aluminum chassis for maximum protection against humidity and external agents
Water Jet Resistant

Compatible With LC8i, DQ-61, DQDX, The Epicenter Amplifiers, D-4.800, D-6.1200, DM-608, DM-810/ Includes 20 Foot Cable And Removable Mounting Enclosure/ Black Finish

Retains warning chimes and balance and fade

Used in non-amplified systems or when replacing amplified systems

Micro-B USB updatable

The R2-A150M is designed to exactly match the power handling of two 10” or 12” R-Series subwoofers – or even four 8” R-Series subs (1200 Watts @ 2 Ohms)
All speaker connections are consolidated on one side of the device for easy access, while the amplifier controls have been relocated to the top under a removable plate, allowing for quick adjustments to gain and crossover controls.
To simplify the installation process, mounting brackets are integrated onto the chassis of the amplifier.
Build a large subwoofer system in your vehicle and run it with one single R2-A150M mono amp.
Built with Alpine's cutting-edge Class-D Amplifier Circuit, this next-generation R-Series amp offers exceptional sound qu…

1200W Power/ High Level Input Capable/ Continuously Variable On Board Punch EQ/ Includes RLC Remote Level Control/ Rollback Protection/ Top Mounted Control Panel/ Cast aluminum Heat Sink/ Black Finish

The QS Series amplifiers epitomize efficient design, offering full-range frequency response at an exceptional value. The QS400.4 stands out with its regulated power supply, ensuring constant power delivery and boasting an impressive efficiency rate of 80-90% despite its compact aluminum heatsink.

The Pyramid PB918 America 2 Channel Amplifier is designed to enhance your car's audio system with powerful and clear sound. Featuring a sleek design and versatile performance capabilities, this amplifier delivers impressive power output and detailed audio, making it an ideal upgrade for car audio enthusiasts.

Single Channel Amplifier/ Infrasonic Filter/ 12dB/Octave Butterworth Crossover/ High Level Input Capable With Auto Turn-On Circuit/ 20Hz To 250Hz +/- 1.0dB Frequency Response/ Hi/Low Level: 1 RCA Pair/ Convection Cooling/ Cast Aluminum Heat Sink/ Silver Finish

750W Power/ High Level Input Capable/ Continuously Variable On Board Punch EQ/ Class-D Topology/ Rollback Protection/ Top Mounted Control Panel/ Cast Aluminum Heat Sink/ Black Finish

MB Quart compact 400 watt mono Powersports amplifier

300W x 1 Powered Amplifier/ IP66 Rated Water Resistant Design/ Dynamic Pulse Power (DPP) Technology/ Waterproof Connector/ Black Finish

Connectivity: This amplifier can accept low- or speaker-level inputs so it'll work in almost any system, and the package includes screw-on RCA-to-bare wire adapters for the speaker-level signal. JBL has also included their electrical anti-rotational locking (E.A.R.L.) ground terminal, for a more conductive and secure ground connection for the amplifier. The Stadium 600 sub amp will integrate perfectly and look fantastic in a system that uses the matching JBL Stadium 4 four-channel full-range amplifier.
Mono subwoofer amplifier: 380 watts RMS x 1 at 4 ohms (600 watts RMS x 1 at 2 ohms)
Variable low-pass filter (32-320 Hz, 12 dB/octave) / Variable bass boost (0-9 dB at 70 Hz) / Phase switch …

Kenwood's KAC-M3004 4-channel amplifier is crafted to bring you compact design and powerful sound for your vehicle at 50 watts RMS per channel.

Configurable As 6/5/4/3/2 Channel Amplifier/ 6 Balanced Pramp Inputs/ 8 Speaker Level Inputs/ 10 Hz - 30 kHz Frequency Response/ 102 dBa, Ref 200 W @ 2 Ohm Signal To Noise/ Black Finish

High-Power Multi-Channel Amplifier with Accubass The LC-5.1300 brings five channels of sonic purity and unprecedented levels of power to a complete range of multi-channel and subwoofer amplifiers from AudioControl. Featuring eight active speaker level inputs, six line-level inputs, the LC-5.1300 is packed with intuitive setup controls for high-pass, band-pass, and low-pass filters, automatic and selectable signal summing, and AccuBASS. Integrate seamlessly with your OEM or aftermarket sound system with this single-amp solution, which will transform your audio with impressive power levels delivered to your speakers and subs. Add the optional ACR-1 remote for level control. Features: Configurable …

Configurable as 4/3/2 channel amplifier

Subwoofer Amplifier With Patented AccuBASS/ 2 Balanced Preamp Inputs/ 10 Hz - 30 kHz Frequency Response/ 102 dBa, Ref 850 W @ 4 Ohm Singal To Noise/ Black Finish

Monoblock Micro Amplifier with Accubass ACM series amplifiers by AudioControl are the perfect blend of power and features for car audio systems from mild to wild. Compact size, high power, and the ability to help integrate with factory stereo systems are features that assure "Making Good Sound Great" can happen in any installation. Reversible cover plates allow flexible mounting options when paired with AudioControl DM Series Processors or when using multiple ACM series amplifiers in confined spaces. Once again AudioControl comes to the rescue combining features and benefits needed to assure audio euphoria in an automotive setting. Features: 300 watts @ 2 ohms 175 watts @ 4 ohms AccuBASS Processing …