Antennas for Routers MikroTik

The SXTsq Lite5 is a compact and lightweight outdoor wireless device with an integrated antenna
Perfect for point to point links of up to 12 kilometers or as a CPE unit. It is compact, weatherproof and easy to mount
The SXTsq Lite5 retains a 16dBi antenna like the SXT Lite5, our previous model, yet the antenna design has been improved and the physical size has been dramatically reduced - the SXTsq is two times thinner (see photos for comparison)
The device can be mounted on horizontal and vertical poles and masts, but for precise alignment, separately available is the QuickMount Pro, which allows to adjust in every angle (see photo and related product)
The device includes one 10/100 Mbit …

The LHG R is an integrated high gain 21dBi LTE antenna WITHOUT LTE modem (free miniPCI-e slot)
If for any reason you don't want to use one of our own LTE modems, you can simply buy the LHG R and install the modem of your choice
Unit is designed, for remote locations that are within cellular network coverage
Mount it outdoors, on a pole, mast or any high enough structure, and connect even where cell phones can’t
Due to it’s large sized high gain antenna, the device is capable to connect to cell towers in extreme rural locations, giving you the ability to provide last mile internet access where nothing else is available

GrooveA-52HPn is a fully featured wireless RouterBOARD powered by RouterOS
Weatherproof, durable and ready to use. The GrooveA-52HPn has one 10/100 Ethernet port with PoE support and a built in wireless radio
It has software selectable 2 or 5GHz wireless mode, and high output power! GrooveA has also supports AP mode
The GrooveA-52HPn has a built-in N-male connector, and pole attachment points, so you can attach it to an antenna directly, or use a standard antenna cable. LED signal indicators make it easy to install and align
Box contains: Groove unit, mounting loops, PoE injector, power adapter, Omni directional antenna (6dBi 2.4GHz, 8dBi 5GHz)

The new QM-X adapter enables vertical and horizontal adjustment on the pole
It is lightweight, easy to use, extremely durable and without any small parts that might break
Dimensions 60 x 56 x 35 mm, Material Glass fibre reinforced nylon
Tube diameter 30 mm, Max tube diameter to which, mount can be attached 60 mm
Maximum antenna weight 2 kg, Compatible devices SXTsq series and DISC 5

It’s simple and low cost
Adjustable horizontally and vertically
Wall or pole mountable
With the quickMOUNT pro it is possible to perfectly set antenna alignment using integrated graduated scale.
The quickMOUNT is very durable due to it’s special plastic composite material - anvilNITE (TM)

The quickMOUNT pro is an advanced wall mount adapter for small point to point and sector antennas
You can mount it on the wall or use it as an adapter from large diameter pole to small size antenna mounting clip ensuring reliable fitment
The quickMOUNT pro gives possibility to turn antenna within 140 degrees both in horizontal and vertical plane
With the quickMOUNT pro it is possible to perfectly set antenna alignment using integrated graduated scale
You can use the quickMOUNT pro with any pole mountable device with the included pole adapter, or MikroTik's small mounting clip (SXT clip adapter) with devices less than 1.5 kg

The LHG LTE kit is a device for remote locations that are within cellular network coverage
Mount it outdoors, on a pole, mast or any high enough structure, and connect even where cell phones can’t
Due to it’s large sized high gain antenna, the device is capable to connect to cell towers in extreme rural locations, giving you the ability to provide last mile internet access where nothing else is available
The unit is equipped with one Ethernet port, has a built in high quality Category 4 modem for speeds of up to 150 Mbit/s downlink and 50 Mbit/s uplink
RBLHGR&R11e-LTE includes LTE modem that supports LTE bands 2, 4, 5 and 12, mostly used by mobile operators in United States, Canada and Lati…

The Dynadish 6 uses the same effective antenna design and enclosure as our successful 5 GHz model, but this new device operates in the licensed 6GHz frequency.
This means less interference than the often saturated 5 GHz frequencies for higher speed and more reach.
By operating above the most popular WiFi frequencies you are now able to build your wireless links from busy towers without suffering problems with noise.
Ideal for long distance point-to-point links: 5.9 - 6.4 GHz dual chain board integrated into a 25 dBi dish antenna
This product is not suitable for unlicensed ISM bands. Device use is subject to country regulations. Availability might be limited depending on distributor stock …

Mikrotik DISC Lite5 US version is an integrated 21dBi Dual Chain 802.11n CPE with a 600MHz CPU, 64MB RAM, 1x 10/100Mbps Ethernet port and RouterOS L3 installed
The Mikrotik RBDisc-5nD-US uses a backfire type antenna which allows to reach 21dBi gain in such a low cost and compact package
The Mikrotik device comes complete with a power supply, PoE injector and mounting kit. The RouterOS Level3 allows to use the DISC Lite5 as CPE or Point-to-Point 5GHz links
CPU core count: 1. CPU nominal frequency: 600 MHz. Size of RAM: 64 MB. Storage size: 16 MB. PoE in: Passive PoE
PoE in input Voltage: 10-30 V. Wireless 5 GHz standards: 802.11a/n. 10/100 Ethernet ports: 1. Max power consumption: 6 WMikrotik,…

Mikrotik DISC Lite5 US version is an integrated 21dBi Dual Chain 802.11n CPE with a 600MHz CPU, 64MB RAM, 1x 10/100Mbps Ethernet port and RouterOS L3 installed
The Mikrotik DISC uses a backfire type antenna which allows to reach 21dBi gain in such a low cost and compact package
The Mikrotik device comes complete with a power supply, PoE injector and mounting kit. The RouterOS Level3 allows to use the DISC Lite5 as CPE or Point-to-Point 5GHz links
CPU core count: 1. CPU nominal frequency: 600 MHz. Size of RAM: 64 MB. Storage size: 16 MB. PoE in: Passive PoE
PoE in input Voltage: 10-30 V. Wireless 5 GHz standards: 802.11a/n. 10/100 Ethernet ports: 1. Max power consumption: 6 W…

Ethernet lan data rates: 10,100 MBit/s
Flash memory: 16MB
Internal memory: 256 MB
Receiver sensitivity: 6MBit/s 25 -96 54MBit/s 21 -80 MCS0 25 -96 MCS7 20 -75 MCS9 18 -70
Networking standards: IEEE 802.11ac