Buy Sea To Summit 8L Evac , Men's, Beluga 23S2SU8LVCDRYBGS2CAC
When you make a purchase through links on our site, we may earn an affiliate commission.
Evac Dry Bag
Why risk our down puffy jacket or sleeping bag when we can safely pack them in Sea to Summit's waterproof Evac Dry Bag. Fully waterproof and seam-sealed, it features an air-permeable eVent base, which allows us to seal the bag and squeeze out air for better packability. With a 10,000mm waterproof rating, it's not meant to be submerged, but it's sui... moretable for paddle sports and works best as a dry storage sack that we stuff into our duffle or backpack to keep our gear dry.
Sea to Summit 8L Evac Dry Bag, Men's, Beluga - Black Friday 23S2SU8LVCDRYB
Design and Details Non-wicking Hypalon roll-top closure with patented field repair buckle Valve-free air permeable eVent fabric base allows soft items to be compressed Double-stitched and fully-taped waterproof seams Bluesign Approved recycled 70D nylon sidewall fabric uses a Non-PFC DWR finish 70D eVent face fabric is Non-PFC New base lash loop fe... moreature compatible with optional shoulder Sling Strap attachment Oval shape stacks and packs easily Lightweight high density weave waterproof fabric 70 Denier 210T nylon with a white interior polyurethane (PU) coating High density 210T weave gives the fabric a stronger tear strength and greater durability White PU coating reflects light and makes it easier to identify contents inside your dry sack PU coating to make two different versions of this fabric: 2,000mm (Nylon Stuff Sacks, Pack Covers and Compression Sacks) and 10,000mm (Lightweight Dry Sacks, eVac Dry Sacks and Dry Compression Sacks) waterhead rated eVent is a proprietary waterproof breathable membrane fabric with micro-fine pores that allow the passage of water vapour but not liquid Traditionally, waterproof and breathable PTFE (polytetrafluoroethylene) membranes glog easily by body oils, which renders them useless after a little use Solution was to add a PU backing to protect the PTFE membrane When thin enough, PU still allows vapour transmission but at a much lower rate Some manufacturers avoid the membrane and just use a PU coating PU has to be relatively thick to ensure sufficient waterproofing, resulting in even lower breathability Genius of eVent was to make the membrane oleophobic (oil repellent), meaning it wouldn't clog with oils, therefore didn't need the inhibiting PU layer Sufficiently breathable that a pressure gradient can force air through it eVent in this way as a purge valve in the bottom of our eVac Dry Sacks, and our Ultra-Sil and 70D Dry Compression Sacks
Made from 70D high-density recycled Rip Stop nylon - a water-resistant, durable and wear-resistant material. Breathable e Vent base, which allows air to be pushed to the outside while keeping the contents dry inside for more efficient use of space. It has a water-repellent DWR coating without PFC. The oval base prevents rolling and allows for effic... moreient bagging. Double stitched and fully taped waterproof seams. The inner PU coating is waterproof (10,000 mm). The reflective white interior coating
Design and Details Non-wicking Hypalon roll-top closure with patented field repair buckle Valve-free air permeable eVent fabric base allows soft items to be compressed Double-stitched and fully-taped waterproof seams Bluesign Approved recycled 70D nylon sidewall fabric uses a Non-PFC DWR finish 70D eVent face fabric is Non-PFC New base lash loop feature compatible with optional shoulder Sling Strap attachment Oval shape stacks and packs easily Lightweight high density weave waterproof fabric 70 Denier 210T nylon with a white interior polyurethane (PU) coating High density 210T weave gives the fabric a stronger tear strength and greater durability White PU coating reflects light and makes it easier to identify contents inside your dry sack PU coating to make two different versions of this fabric: 2,000mm (Nylon Stuff Sacks, Pack Covers and Compression Sacks) and 10,000mm (Lightweight Dry Sacks, eVac Dry Sacks and Dry Compression Sacks) waterhead rated eVent is a proprietary waterproof breathable membrane fabric with micro-fine pores that allow the passage of water vapour but not liquid Traditionally, waterproof and breathable PTFE (polytetrafluoroethylene) membranes glog easily by body oils, which renders them useless after a little use Solution was to add a PU backing to protect the PTFE membrane When thin enough, PU still allows vapour transmission but at a much lower rate Some manufacturers avoid the membrane and just use a PU coating PU has to be relatively thick to ensure sufficient waterproofing, resulting in even lower breathability Genius of eVent was to make the membrane oleophobic (oil repellent), meaning it wouldn't clog with oils, therefore didn't need the inhibiting PU layer Sufficiently breathable that a pressure gradient can force air through it eVent in this way as a purge valve in the bottom of our eVac Dry Sacks, and our Ultra-Sil and 70D Dry Compression Sacks
Product description is based on database from online stores. Be sure to verify all information directly with seller before purchasing.
This website uses cookies. Proceeding to use this website gives your consent for gathering and processing your data for analytic and marketing purposes.
