Dark mode
USA
Catalog   /   Photo   /   Photo Accessories   /   Teleconverters & Lens Mount Adapters   /   Freefly

Freefly Fringer Auto Focus Adapter Canon EF To Fuji X Mount FR-FX2

Photos - Teleconverter / Lens Mount Adapter Freefly Fringer Auto Focus Adapter Canon EF To Fuji X Mount FR-FX2
$207.00 
Buy!
Adorama.com

Freefly Fringer Auto Focus Adapter Canon EF To Fuji X Mount FR-FX2

Adorama.com
Delivery: in USA
Report
Freefly Fringer Auto Focus Adapter Canon EF To Fuji X Mount FR-FX2
$207.00 

Buy Freefly Fringer Auto Focus Adapter Canon EF To Fuji X Mount FR-FX2

When you make a purchase through links on our site, we may earn an affiliate commission.

Freefly Fringer Auto Focus Adapter Canon EF To Fuji X Mount FR-FX2

Fringer Canon EF - Fuji X Autofocus Adapter is the world's first electronic adapter which allows both Autofocus, Auto Aperture and image stabilization function of the Canon lenses to be retained when using on Fuji X cameras. Phase Detection AF is being used and thereby the AF speed is comparable to native X-mount lens. For certain Fuji cameras, all... morephase detection focus points can be utilized. • Built-in electronic aperture ring (like XF lenses) • Both bayonets are made of brass • The 2nd generation! - Redesigned aperture ring for more convenient operation • New MCU (more powerful, more resources for firmware update) • Better light absorbing design This product is compatible with Canon EF mount and Fujifilm X mount protocols. It can control lens' aperture electronically, auto focus and report lens information for EXIF recording. The pro version has a built-in electronic aperture ring. Like native XF lenses, it sets aperture values. And it employs contactless sensors so that you don't need to worry about wearing problems. The standard version doesn't have an aperture ring and the aperture value can only be set through the camera body. Compatibility This adapter works on X mount cameras. However, due to capability differences of different camera models, its performance may vary. On cameras equipped with none X-Trans CMOS or X-Trans I CMOS, such as X-A series, X-E1 and X-Pro1, since the camera body lacks PDAF support, adapted lenses can only work under CDAF mode. AF speed may be slow. And for some lenses AF accuracy may not be good, either. If its performance can't satisfy you, MF is recommended. On cameras equipped with X-Trans II CMOS, e.g. X-E2, X-T1, etc., X-Trans III CMOS, e.g. X-H1, X-T2, X-Pro2, XE3, etc., and X-Trans IV CMOS, e.g. X-T3, as those PDAF focus points are activated, AF becomes faster and more accurate. Since PDAF region of X-Trans II CMOS is much smaller, X-Trans III & IV based cameras are recommended. Fringer has tested and optimized over 120 models of EF mount lenses. All optimized lenses can activate all the PDAF focus points and gain a better AF performance. However, the EF mount is a huge system and there are so many different lens models. A lot of them have not been tested and optimized, yet. Most of them would work on the adapter. However, the AF performance may be lower as PDAF may not work at all. And a small amount of them may not be compatible.
Adorama.com
Delivery: in USA
Report
$207.00
Fringer Canon EF - Fuji X Autofocus Adapter is the world's first electronic adapter which allows both Autofocus, Auto Aperture and image stabilization function of the Canon lenses to be retained when using on Fuji X cameras. Phase Detection AF is being used and thereby the AF speed is comparable to native X-mount lens. For certain Fuji cameras, all phase detection focus points can be utilized. • Built-in electronic aperture ring (like XF lenses) • Both bayonets are made of brass • The 2nd generation! - Redesigned aperture ring for more convenient operation • New MCU (more powerful, more resources for firmware update) • Better light absorbing design This product is compatible with Canon EF mount and Fujifilm X mount protocols. It can control lens' aperture electronically, auto focus and report lens information for EXIF recording. The pro version has a built-in electronic aperture ring. Like native XF lenses, it sets aperture values. And it employs contactless sensors so that you don't need to worry about wearing problems. The standard version doesn't have an aperture ring and the aperture value can only be set through the camera body. Compatibility This adapter works on X mount cameras. However, due to capability differences of different camera models, its performance may vary. On cameras equipped with none X-Trans CMOS or X-Trans I CMOS, such as X-A series, X-E1 and X-Pro1, since the camera body lacks PDAF support, adapted lenses can only work under CDAF mode. AF speed may be slow. And for some lenses AF accuracy may not be good, either. If its performance can't satisfy you, MF is recommended. On cameras equipped with X-Trans II CMOS, e.g. X-E2, X-T1, etc., X-Trans III CMOS, e.g. X-H1, X-T2, X-Pro2, XE3, etc., and X-Trans IV CMOS, e.g. X-T3, as those PDAF focus points are activated, AF becomes faster and more accurate. Since PDAF region of X-Trans II CMOS is much smaller, X-Trans III & IV based cameras are recommended. Fringer has tested and optimized over 120 models of EF mount lenses. All optimized lenses can activate all the PDAF focus points and gain a better AF performance. However, the EF mount is a huge system and there are so many different lens models. A lot of them have not been tested and optimized, yet. Most of them would work on the adapter. However, the AF performance may be lower as PDAF may not work at all. And a small amount of them may not be compatible.
Product description is based on database from online stores. Be sure to verify all information directly with seller before purchasing.

How to place an order?How to add store?
Remember that online store is responsible for accuracy of information about price, warranty and delivery!
Filters
Popular models