INTELLINET PoE Splitter 560443
 |
Buy INTELLINET PoE Splitter 560443
When you make a purchase through links on our site, we may receive a affiliate commission.
Intellinet PoE Splitter 560443 | $26.59 |  | |||
Can be used to connect non-PoE IEEE 802.3af/t-compliant devices to a PoE injector or PoE switch
Output current, selectable: 5, 7.5, 9 or 12 V DC
Power output: 5 V / 4 A, 7.5 V / 2.7 A, 9 V / 2.3 A and 12 V / 1.7 A
10/100 auto-sensing input port automatically detects optimal network speeds
RJ45 input port with Auto-MDIX and NWay auto-negotiation support
Standards: IEEE 802.3, 802.3u, 802.3af, 802.3at
Interface: 1x RJ45 10/100 Mbps Input Port for 48 V IEEE 802.3af-compliant Signal. 1x RJ45 10/100 Mbps Output Port. 1x Power Output Port
Power Consumption (Max):?25.4 W
Maximum Output: 5 V- 4A, 7.5 V- 2.7A, 9V- 2.3A, 12 V- 1.7A
Output current, selectable: 5, 7.5, 9 or 12 V DC
Power output: 5 V / 4 A, 7.5 V / 2.7 A, 9 V / 2.3 A and 12 V / 1.7 A
10/100 auto-sensing input port automatically detects optimal network speeds
RJ45 input port with Auto-MDIX and NWay auto-negotiation support
Standards: IEEE 802.3, 802.3u, 802.3af, 802.3at
Interface: 1x RJ45 10/100 Mbps Input Port for 48 V IEEE 802.3af-compliant Signal. 1x RJ45 10/100 Mbps Output Port. 1x Power Output Port
Power Consumption (Max):?25.4 W
Maximum Output: 5 V- 4A, 7.5 V- 2.7A, 9V- 2.3A, 12 V- 1.7A
The product description is generated based on data from online stores. Before purchasing be sure to verify all information directly with the seller.
Silicon-Carbon Batteries: What They Are and How They Outperform Conventional Lithium-Ion BatteriesLet's figure out how silicon-carbon batteries are constructed and what's good about them.
Radeon RX 9070 XT ReviewLearn more about the technical capabilities of the new product, improvements to the RDNA 4 architecture, and an update to the FSR 4 scaling system.
How to place an order?How to add store?
Remember that the online store is responsible for the accuracy of information regarding price, warranty, and delivery!
We recommendCompare using chart →
