Alfi brand ABF3219SUD 32" Undermount or Drop In Single Basin Fireclay with Basin Rack Black Matte Sinks Kitchen

ALFI brand ABF3219SUD 32" Undermount or Drop In Single Basin Fireclay Kitchen Sink with Basin Rack Due to the organic nature of the fireclay, material dimensions may vary by 1/8" of an inch. We recommend having the sink on location to trace and measure for countertop and cabinet cut outs. Furthermore, minor imperfections may appear. These are not defects; this is what makes each sink uniquely its own. Defective sinks will not pass the quality control inspectionALFI brand ABF3219SUD Features:Covered under ALFI brand's 1 year limited warrantyConstructed of fireclayDual installation - sink can be installed under the countertop or be dropped into a cutout in the countertopSingle basin design for maximum work spaceCenter drain location provides optimal draining capabilitySink features a glazed over hanging lip all around the top which allows you to install it also as a drop inCompatible grid included in purchaseThis sink is constructed of solid high-grade fireclay material using high pressure casting, ensuring durability, longevity, and resilience to acids, alkali's, scratches, and chipping. The glazing of the sink surface provides both strength and shine over long periods of time. The raw material used (fine fireclay) allows for uniformity in the finishStandard 3 ½” center drain and can be used with a garbage disposalHeat resistant up to 350' F. This sink has been tested and will not crack due to heat exposure from pots and pans up to 350' F hotALFI brand ABF3219SUD Specifications:Sink Length: 32" (left to right)Sink Width: 19" (front to back)Sink Height: 10" (top to bottom)Basin Dimensions: 29-3/8" L x 16-3/8" W x 9" DMinimum Cabinet Size: 32"If planning to install as undermount then this sink requires support from beneath. Purchase the undermount installation kit (Model # ABUMSB) and attach it to the inner side walls of your cabinet. We then recommend putting plywood on the rods, to create a large flat and smooth surface for your sink. Drill the necessary center hole to accommodate for the drain. If you choose not to purchase the kit, you will need to create a custom support using 2x4's Black Matte