Monoprice 18in SATA 6Gbps Cable with Locking Latch - Blue
 |
 |
Close
Buy Monoprice 18in SATA 6Gbps Cable with Locking Latch - Blue
When you make a purchase through links on our site, we may earn an affiliate commission.
Monoprice Monoprice 18in SATA 6Gbps Cable with Locking Latch - Blue | $1.69 |  | |||
Monoprice 108782 18-Inch SATA 6Gbps Cable with Locking Latch, Blue 8782 | $4.68 |  | |||
Each major revision of the Serial ATA interface specification has doubled the maximum data transfer rate. The latest SATA Revision 3.0 allows for data transfer speeds of up to 6 Gbps.
While the cables for all three revisions appear to be similar and will physically fit into the connectors on all SATA drives and controllers, the higher data transfer rate of SATA 6 Gbps requires higher quality materials and closer tolerances than the previous two revisions required.
Monoprice™ SATA 6 Gbps cables are certified to provide maximum speeds from your SATA system, up to 6 Gbps when used with equivalent devices and controllers.
Each end of this internal cable features a straight connector with an attached locking latch, to ensure that your connections do not come loose due to movement or vibration.
Note that SATA 6 Gbps cables are backwards compatible and can be used with SATA 3 Gbps and SATA 1.5 Gbps devices. However, the data transfer of the SATA subsystem will be limited to that of the slowest device. So, for example, if a SATA 6 Gbps cable is connected to a SATA 3 Gbps drive and a SATA 1.5 Gbps controller, the drive will be limited to a transfer rate of 1.5 Gbps.
Monoprice™ and all Monoprice logos are trademark of Monoprice Inc.
Updated Sep 24, 2020
Warning: This product may contain a chemical known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
While the cables for all three revisions appear to be similar and will physically fit into the connectors on all SATA drives and controllers, the higher data transfer rate of SATA 6 Gbps requires higher quality materials and closer tolerances than the previous two revisions required.
Monoprice™ SATA 6 Gbps cables are certified to provide maximum speeds from your SATA system, up to 6 Gbps when used with equivalent devices and controllers.
Each end of this internal cable features a straight connector with an attached locking latch, to ensure that your connections do not come loose due to movement or vibration.
Note that SATA 6 Gbps cables are backwards compatible and can be used with SATA 3 Gbps and SATA 1.5 Gbps devices. However, the data transfer of the SATA subsystem will be limited to that of the slowest device. So, for example, if a SATA 6 Gbps cable is connected to a SATA 3 Gbps drive and a SATA 1.5 Gbps controller, the drive will be limited to a transfer rate of 1.5 Gbps.
Monoprice™ and all Monoprice logos are trademark of Monoprice Inc.
Updated Sep 24, 2020
Warning: This product may contain a chemical known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Product description is based on database from online stores. Be sure to verify all information directly with seller before purchasing.
All about the Thunderbolt protocolLet's figure out what the protocol from Apple and Intel is, why it is needed and why Thunderbolt is not the same as USB-C
How to organize remote work during power outagesAutonomous work on a laptop without the use of smoky generators and expensive charging stations
How to place an order?How to add store?
Remember that online store is responsible for accuracy of information about price, warranty and delivery!
You may be interested in
