Dark mode
USA
Catalog   /   Sound & Hi-Fi   /   Microphones   /   Earthworks

Earthworks M50 High Definition Measurement M50

Photos - Microphone Earthworks M50 High Definition Measurement  M50
Earthworks M50 High Definition Measurement Microphone M50-
from $1,299.00 

Buy Earthworks M50 High Definition Measurement M50

When you make a purchase through links on our site, we may earn an affiliate commission.

Earthworks M50 50kHz Omnidirectional Measurement Microphone

Demo Omni Measurement Mic
Amazon.com
Delivery: in USA
Report
$1,299.00

Earthworks M50 High Definition Measurement Microphone M50-EARTHWORKS

The M50 is a High Definition Measurement Microphone from Earthworks. It's part of their M Series of measurement microphones.Earthworks' M SeriesHas become the accepted standard for affordable, reliable reference and measurement microphones that are accurate in the time domain and frequency response. These mics are remarkably stable with respect to... moretemperature and atmospheric conditions, and are optimized for clean, very fast impulse performance, providing accurate wideband response with virtually no handling noise.FeaturesIdeally suited for acoustical measurements that require extended frequency response, including high-end loudspeaker design and quality control, scientific research, measurements of ultrasonic or subsonic transducers, or any application where an extremely accurate free-field measurement microphone is requiredProvides laboratory-grade accuracyOmnidirectional polar patternFlat frequency response, fast impulse response and exceptional polar characteristicsUsed by SMAART™, MLSSA™, Spectrafoo™, TEF™ and RTA in addition to acoustic measurement systems manufactured by dbx, DEQX and othersMeets or exceeds ANSI Type 1 and applicable IEC 61094 requirementsRequires 48 V Phantom PowerEach M Series microphone is delivered with its own calibration chart providing its individually measured open-circuit sensitivity and the frequency response curveSpecificationsFrequency response: 3 Hz to 50 kHz +1/-3 dBPolar Pattern: OmnidirectionalSensitivity: 30 mV/Pa (Typical)Power Requirements: 48 V Phantom, 10 mAPeak Acoustic Input: 142 dB SPLOutput: XLR (Fig. 1)Output Impedance: 100 Ω, balanced (50 Ω ea. pin 2 & 3)Minimum Load: 600 Ω btw. pins 2 & 3Noise: 22dB, A equivalentDimensions (L x Ø): 9" x 0.860" (229 x 22mm)Weight: 0.5 lb. (225 g) Earthworks M50 High Definition Measurement Microphone.
Fullcompass.com
Delivery: in USA
Report
$1,299.00
The M50 is a High Definition Measurement Microphone from Earthworks. It's part of their M Series of measurement microphones.Earthworks' M SeriesHas become the accepted standard for affordable, reliable reference and measurement microphones that are accurate in the time domain and frequency response. These mics are remarkably stable with respect to temperature and atmospheric conditions, and are optimized for clean, very fast impulse performance, providing accurate wideband response with virtually no handling noise.FeaturesIdeally suited for acoustical measurements that require extended frequency response, including high-end loudspeaker design and quality control, scientific research, measurements of ultrasonic or subsonic transducers, or any application where an extremely accurate free-field measurement microphone is requiredProvides laboratory-grade accuracyOmnidirectional polar patternFlat frequency response, fast impulse response and exceptional polar characteristicsUsed by SMAART™, MLSSA™, Spectrafoo™, TEF™ and RTA in addition to acoustic measurement systems manufactured by dbx, DEQX and othersMeets or exceeds ANSI Type 1 and applicable IEC 61094 requirementsRequires 48 V Phantom PowerEach M Series microphone is delivered with its own calibration chart providing its individually measured open-circuit sensitivity and the frequency response curveSpecificationsFrequency response: 3 Hz to 50 kHz +1/-3 dBPolar Pattern: OmnidirectionalSensitivity: 30 mV/Pa (Typical)Power Requirements: 48 V Phantom, 10 mAPeak Acoustic Input: 142 dB SPLOutput: XLR (Fig. 1)Output Impedance: 100 Ω, balanced (50 Ω ea. pin 2 & 3)Minimum Load: 600 Ω btw. pins 2 & 3Noise: 22dB, A equivalentDimensions (L x Ø): 9" x 0.860" (229 x 22mm)Weight: 0.5 lb. (225 g) Earthworks M50 High Definition Measurement Microphone.
Product description is based on database from online stores. Be sure to verify all information directly with seller before purchasing.

How to place an order?How to add store?
Remember that online store is responsible for accuracy of information about price, warranty and delivery!
Filters