Earthworks FW730/HC Hypercardioid Choir and Cast Iron Base

The FlexWand™ FW730/HC incorporates a High Definition Microphone™ with a 30kHz high frequency response that enables it to pick up high frequency overtones that conventional microphones miss. In addition, it’s extremely fast impulse response allows it to pick up transients far more accurately. The FlexWand™ has near perfect polar response that will not beam or spotlight and will provide more gain before feedback. Integrated choir miking system with 30kHz cardioid microphone, low profile microphone stand and boom. A near-perfect cardioid polar pattern, with 32dB of rear rejection. A wide coverage area means fewer mics and no spotlighting. Your choir will be heard as one unified voice.The microphone head can be positioned as high as 7 feet and as low as 1.5 feet from the floor. Plus, the microphone cable plugs into the base of the microphone, making it incredibly low profile and clean.IncludesFlexWand™ Stand/Wand SectionMicrophone WindscreenBase for StandFeaturesUniform frequency response on or off axisFrequency response of 30Hz to 30kHzNear perfect polar response and the ability to reject sounds from the rear of the microphone, making it a great solution for choirs and vocal groupsLarge flex section near the center of the stand that couples the stand and the wandMini-gooseneck between the end of the wand and the microphone headSubstantial improvement in gain before feedbackThey will handle high sound pressure levels with high rejection of sounds to the rear of the microphoneIdeal where bands or orchestras are placed in front of a choir, as the FlexWand™ will reject much of the sound of the band ororchestraThe near perfect polar response of the FlexWand™ allows the use of fewer microphones on choir, with better sound quality, no spotlighting and incredible rejection of sounds from the rear of the microphoneThe sturdy 12 pound cast iron base will not allow the FlexWand™ to be accidentally knocked overSpecificationsFrequency Response: 20Hz - 30kHzPolar Pattern: HypercardioidSensitivity: 20mV/Pa (-34dBV/Pa)Power Requirements: 24-48V Phantom,10mAPeak Acoustic Input: 139dB SPLOutput: XLR-3Minimum Output Load: 600Ω, balanced between pins 2 & 3Noise: 16dB SPLDimensionsStand: 7 ft. 2 in.” long (1.32m),Cast Iron Base: 12” (30.48cm) diameter, 1.1” (2.7cm) high;WeightStand 2 lbs. (.9 kg)Cast Iron Base 12.6 lbs. (5.7kg) Earthworks FW730/HC Hypercardioid Choir Microphone and Cast Iron Base.