Remote Audio BDSv4U Battery Distribution System with USB and Remote Ports

The Remote Audio BDS (Battery Distribution System) has been the standard power management system in ENG audio bags for over a decade. Once considered a luxury, the ability to power multiple pieces of audio equipment with a single rechargeable battery is now a necessity as equipment demands become more complex. The BDS system accommodates this need with a reliable, convenient and robust design. The BDSv4u adds refinements such as a built-in 5V at 2A (10W) regulated USB output for powering or charging compatible devices, a "low- battery" indication with three user-selectable thresholds and an easily accessible "switched/unswitched" toggle. Remote Audio's BDS system consists of a reverse-polarity protected and overload protected distribution box with illuminated bi-color on/off switch, six outlets, power source (typically a rechargeable battery such as the NP-1), an input cable and output cables for the devices being powered. The primary purpose of the BDS system is to simultaneously turn on and off multiple pieces of equipment being powered by a single source. For this basic function, the BDSv4u may be used exactly like the older BDS versions that it replaces. The input and output connections are the same, so all previous BDS input and output cables manufactured by Remote Audio are compatible with the BDSv4u.The BDSv4u design takes the system to another level of functionality with the 6-pin connector for the RM (Remote Meter) & RS (Remote Switch) accessories. The RM & RS can turn on and off the BDSv3 remotely and the RM can display the voltage of the power source and the amperage draw of the equipment. The BDSv4u can be used without the RM/RS. In this case, the toggle switch turns the unit on and off. Using the BDSv4u with the optional RM or RS When connected to the RM or RS and the BDSv4u toggle switch is in the OFF position, the RM/RS controls the on/off circuit of the BDSv4u. This allows the BDSv4u box to be placed deep in the bag, out of the way. To turn the BDSv4u on or off with the RM/RS, flip the toggle on the RM/RS. When on, the RM will display the voltage of the power source. Pressing the lower button (labeled "AMPS") will display the current draw of the devices being powered for as long as the AMPS button is pressed. If the BDSv4u toggle switch is in the on position, the RM/RS will not turn off the BDSv4u. In this case, the on/off function of the RM will only turn on and off the meter display. Connectors and Cables The outlet connectors on the BDS box are a special switching type that requires a long-shaft mating plug with a 2.5mm hole. This connector set was chosen for its strength and so that unused (exposed) outlets on the box are not active until a cable with the proper mating connector is plugged into it, helping prevent accidental short circuits. Output cables by Remote Audio are manufactured specifically for use with the BDS and come with unique low-profile right angle locking connectors. Therefore, it is recommended that only