Mount-It Heavy Duty XXL Tilt TV Mount

The Mount-It! Heavy Duty XXL Tilt TV Wall Mount (MI-14009) is built for the largest flat panel TVs on the market — 60 to 120 inches and up to 264 lbs — with an extra-wide 39.57" wall plate that distributes load across dual studs at 16" or 24" on-center spacing for rock-solid stability. The mount tilts 10 degrees upward and 10 degrees downward for precise glare control and viewing angle adjustment, and sits just 3.1 inches from the wall for a clean, low-profile look. With VESA compatibility starting at 50x50 mm and reaching up to 900x600 mm across 23 standard patterns, this is one of the most broadly compatible large-screen tilt mounts available. Installation takes approximately 30 minutes and includes a mounting template, bubble level, and all hardware. Key Specifications Compatible TV Sizes: 60" – 120" flat panel TVs Weight Capacity: Up to 264 lbs VESA Compatibility: 50x50 mm to 900x600 mm (23 standard patterns) Tilt: 10° upward / 10° downward Profile Depth: 3.1" from wall Movement: Tilting Mechanism: Static Wall Plate: 39.57" x 8.86" (extra-wide) Stud Type: Dual stud Stud Spacing: 16" or 24" on-center Corner Installation: Not supported Material: Heavy-duty steel Installation Difficulty: Easy Compatible Installation Surfaces Wood studs (drywall over studs) Metal studs (drywall over metal studs) Solid wood wall (planks, beams, timber) Plywood backing wall Brick (solid brick) Brick veneer Concrete block (CMU / cinder block) Concrete (poured concrete) Tile over studs (tile on backer board over studs) Tile over masonry (tile on concrete or block) Ideal For Living rooms and home theaters with 75″–120″ TVs where a fixed, low-profile tilt mount is preferred over full motion Large-format commercial displays, conference rooms, and digital signage requiring 264 lb capacity Installations with unusual VESA patterns — the 50x50 minimum and 23-pattern range covers nearly any large TV Walls with 16" or 24" stud spacing requiring a wide-plate dual stud solution Any large-screen setup where swivel isn’t needed but tilt and maximum weight capacity are TV Brand Compatibility Compatible with VESA-standard flat panel TVs from Samsung, LG, Sony, TCL, Vizio, Hisense, and other major brands within the supported size (60–120"), weight (up to 264 lbs), and VESA pattern (50x50–900x600) range. What's in the Box Heavy duty XXL tilt TV wall mount Mounting hardware Bubble level Installation template User manual Installation Estimated install time: ~30 minutes Difficulty: Easy Stud type: Dual stud Stud spacing: 16" or 24" on-center Mounting template included: Yes Tools required: Stud finder, power drill, drill bits (wood bits for studs or masonry bits for concrete), level, measuring tape, screwdrivers or socket wrench