APC UPS Battery Backup and Surge Protector - BE850G2 BE850G2

ManageabilityLED Status Display - Quickly understand unit and power status with visual indicators.Audible Alarms - Provides notification of changing utility power and UPS power conditions.Marketing FeaturesBattery-protected and Surge-only Outlets - Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment.AvailabilityBattery Failure Notification - Provides early-warning fault analysis on batteries enabling timely preventive maintenance.Automatic Self-test - Periodic battery self-test ensures early detection of a battery that needs to be replaced.Intelligent Battery Management - Maximizes battery performance; life; and reliability through intelligent; precision charging.ProtectionSurge Only Outlets - Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.Battery and Surge Protected Outlets - Back up and protect your hardware and data during power outages; surges and spikes.SafetySafety-agency Approved - Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.Product Features:Adjustable Voltage Sensitivity - Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applicationsCold-start Capable - Provides temporary battery power when the utility power is outDisconnected Battery Notification - Warns when a battery is not available to provide backup powerHot-swappable Batteries - Ensures clean; uninterrupted power to protected equipment while batteries are being replacedSimple Battery Replacement - Increases UPS availability by allowing quick; easy battery replacementTransformer Block Spacing - Connect bulky transformer block plugs without covering up other outletsUSB Connectivity - Provides management of the UPS via a USB port (not available on all models)Specifications:OutputMax Configurable Power (Watts): 450 Watts / 850VAOutput Frequency (sync to mains): 50/60 Hz +/- 3 Hz Sync to mainsTopology: StandbyWaveform type: Stepped approximation to a sinewaveTransfer Time: 6ms typical: 10ms maximumOutput Connections: (3) NEMA 5-15R (Surge Protection); (6) NEMA 5-15R (Battery Backup)Nominal Output Voltage: 120VInputInput frequency: 50/60 Hz +/- 3 Hz Auto-sensingInput voltage range for main operations: 92 - 139VNominal Input Voltage: 120VInput Connections: NEMA 5-15PNumber of Power Cords: 1Cord Length: 4.99 ft. (1.5m)Batteries and RuntimeBattery type: Lead-acid batteryTypical recharge time: 8 hour(s)Replacement Battery: RBC17Expected Battery Life (years): 2 - 5Battery Charge Power (Watts): 13 WBattery Volt-Amp-Hour Capacity: 102Run time for load: 2m 23sCommunications and ManagementInterface Port(s): USBControl panel: LED status display with on line: on battery: replace battery and building wiring faultAudible Alarm: Alarm when on battery: