DBX ZC-2 Zone Controller with Volume and Mute, for Driverack, Single Gang

The ZC-2 remote device provides computer programmable rotary potentiometer and push-button volume control and muting for the DriveRack 220i, 260, 4800/4820, and ZonePRO products. It's single gang in size and can be wall mounted up to 1000 feet away from your device, connected via Cat5 cable. It has DIP switches allowing identification with connection to the processing device.The Zone Controllers from dbx offer extended utility to the DriveRack® and ZonePRO™ families. ZC-2 and the other Zone Controllers (sold separately) use analog DC voltage to provide logic control ranging from zone source selection, volume and muting, to program or scene selection and fire safety muting. Wired with readily available and affordable Cat5 cable with universally accepted RJ-45 connectors at distances up to 1000 feet, the ZC Zone Controllers offer simple yet elegant solutions to the contractor.FeaturesProgrammable volume and mute control for the DriveRack 220i, 260, 4800/4820, and ZonePRO products2 RJ-45 connectorsUp to 1000 ft. on Cat5 cableSpecificationsConnectors: (2) RJ-45Series Wiring Maximum Cable Length varies with number of Zone Controllers. For Example, Three Zone Controllers: 600' / Six Zone Controllers: 300'Parallel Wiring using ZC-BOB: Up to Six Zone Controllers: 1000'Parallel Wiring Cable: CAT5 or CAT5E with 28.6 Ω/M (Ω/1000ft.) nominal DCR and rated VW-1 or higherSafety Agency Certifications: UL 60065, IEC 60065, EN 55013, E60065 DBX ZC-2 Zone Controller with Volume and Mute, for Driverack, Single Gang.