Crown DCi 2 600N 2-Channel Power , 600W at 4 Ohms, 70V, BLU-Link DCI2X600N

Part of Crown's DriveCore install series, the DCi 2600N is a 2-channel, 600 Watt installation amplifier. Based on the proprietary DriveCore technology, this high performance power amplifier is designed to provide the flexibility required for challenging 21st century installed sound applications.DCi 2600N is loaded with advanced features including analog and digital inputs, networking monitoring and control, programmable general purpose input/output ports and digital signal processing. Balanced analog inputs paired with Harman's proprietary BLU link for digital audio transport allow you to specify a primary input, and if audio is lost the amp automatically switches to the other input to ensure your audio is seamless.Remotely view performance of all networked DCi amplifiers and control as needed with the included HiQnet™ for monitoring and audio manipulation. Audio Architect software and the Powered by Crown app also work with DCi amplifiers, whose digital signal processing capabilities include Level/MAX Limiters, Input/Output EQ, Delay, Matrix Mixer and Speaker Line Monitoring. Configurable GPIO ports add control to key settings such as volume controls, recall presets, or to report errors to a master computer. With advanced versatility, DCi Series amplifiers are also compact and highly energy-efficient to exceed the demands of your installed sound needs.FeaturesDigital audio transport via BLU-LinkBalanced analog inputsHiQnet™ protocol over standard TCP/IP for better monitoring, control and audio manipulationConfigurable GPIO ports can be programmed as volume controls, recall presets, or to report errorsDSP capabilites include LevelMAX Limiters, Input/Output EQ, Delay, Matrix Mixer and Speaker Line MonitoringEN 54-16 compliant for life safety applicationsSpecificationsDual-Mode:2 Ohms: 300W4 Ohms: 600W8 Ohms: 600W16 Ohms: 300W70Vrms: 600W100Vrms: 600WBridge Mono Mode:4 Ohms: 600W8 Ohms: 1200W16 Ohms: 1200W140Vrms: 1200W200Vrms: 1200WFrequency Response ( 8 Ohms, 20Hz - 20kHz): +/-0.25dBBLU Link Input Signal to Noise Ratio (A-Weighted):>104dBTotal Harmonic Distortion (at full rated power, 20Hz- 20kHz): 0.35%Voltage Gain: 34dBDamping Factor (20Hz to 100Hz): >1000Input Impedance (nominal balanced, unbalanced): 10kOhms, 5 kOhmsMaximum Input Level before Compression: +20dBuLoad Impedance (Stereo/Dual Mode): 2 - 16 Ohms;70Vrms and 100VrmsLoad Impedance Bridge Mono: 4 - 16 Ohms; 140Vrms and200VrmsCooling: Continuously variable speed forced air,front to back airflowMaximum Fan Noise (re dBA SPL @ 1M): 45Required AC Mains (+/- 10%): 100V-240V ~ 50/60 HzDimensions: 19" x 3.5" x 14.25" (48.3 x 8.9 x 35.63cm)Weight: 18.8 lbs (8.53 kg)IEC Power Connector: 15A Crown DCi 2 600N 2-Channel Power Amplifier, 600W at 4 Ohms, 70V, BLU-Link.