USA

Crown DCi 4 300 4-Channel Power , 300W at 4 Ohms, 70V DCI4-300

Photos - Amplifier Crown DCi 4 300 4-Channel Power , 300W at 4 Ohms, 70V DCI4-300
Crown DCi 4 300 4-Channel Power Amplifier, 300W at 4 Ohms, 70V DCI4-300
from $2,619.00 

Buy Crown DCi 4 300 4-Channel Power , 300W at 4 Ohms, 70V DCI4-300

When you make a purchase through links on our site, we may earn an affiliate commission.

Crown Audio DCi 4X300 DriveCore Install Analog Series 4-Channel 4x300W Pow

Exclusive DriveCore Technology - The patented DriveCore integrated circuit combines hundreds of discrete circuits into one chip for better performance, lower power consumption and improved reliability Power Saving Modes - Power consumption in sleep mode is less than 1W Auto Standby - Amplifier goes into Sleep mode after 30 minutes of no input sig... morenal Remote Power Off - Sleep mode activated via AUX port 70 V / 100 V Direct Drive - Each channel individually selectable for low-Z or high-Z operation. 100 V Direct Drive Capability - Higher voltage allows more speakers per output and reduced wiring costs. TLC Protection - Protects amplifier from excessive heat and maintains operation by intelligently applying gain reduction when necessary Advanced Protection Circuits - Amplifier and loads are protected against shorted outputs, DC, mismatched loads, overheating, over- or under-voltage, and high frequency overload Complies with Green Edge by Harman - Environmentally friendly practices in design, manufacturing, and packaging complement energy-efficient operation PFC Power Supply - the next generation power supply design guarantees minimum rated power delivered for drastically lower current draw
Amazon.com
Delivery: in USA
Report
$2,618.98

Crown DCi 4 300 4-Channel Power Amplifier, 300W at 4 Ohms, 70V DCI4-300

Part of Crown’s DriveCore series, DCI4-300 is a high performance installation amplifier based on the proprietary DriveCore technology. Engineered to provide the flexibility required for 21st century installed sound applications, DCI4-300 is loaded with advanced features including analog & digital inputs, networking monitoring and control, pro... moregrammable general purpose input/output ports and digital signal processing. True rack size means this amplifier fits within standard rack mounts and can be turned on/off remotely when integrated into your control system. Designed for flexibly, DCi power all loads on a channel-by-channel basis, allowing drive in either one or two speakers in low-Z mode or multiple in high-Z mode (70 Vrms or 100 Vrms). Even in 100 Vrms mode, the DCi Series channels are bridgeable—which means more adaptability for higher power applications such as subwoofers. With advanced versatility, DCi Series amplifiers are also compact and highly energy-efficient to exceed the demands of your installed sound needs.FeaturesDirect Drive Constant VoltageChannel Independent Hi-Z/Low-Z SelectionBridgeable Channel PairsRemote On/Off InterfaceEfficient Cooling DesignAdvanced Power Factor Correction (PFC) Universal Power SupplySpecificationsChannels: FourPower:2 Ohms: 150W4 Ohms: 300W8 Ohms: 300W16 Ohms: 150W70 Vrms: 300W100 Vrms: 300WFrequency Response: (8 Ohms, 20 Hz - 20 kHz): +/- 0.25 dBSignal To Noise Ratio (A-weighted): >108 dBTotal Harmonic Distortion (at full rated power, 20 Hz - 20 kHz): 0.35%Voltage Gain: 34 dBDamping Factor (20 Hz to 100 Hz): >1000Input Impedance (nominal balanced, unbalanced): 10 kOhms, 5 kOhmsMaximum Input Level before Compression: +20 dBuMaximum Input Level before Clipping: +26 dBuLoad Impedance (Stereo/Dual Mode): 2 - 16 Ohms; 70Vrms and 100VrmsLoad Impedance Bridge Mono: 4 - 16 Ohms; 140Vrms and 200VrmsCooling: Continuously variable speed forced air, front to back airflowMaximum Fan Noise (re dBA SPL @ 1M): 45Required AC Mains (+/- 10%): 100V-240V ~ 50/60 HzDimensions: 19" x 3.5" x 14.25"Weight: 20.1lbsIEC Power Connector: 15A Crown DCi 4 300 4-Channel Power Amplifier, 300W at 4 Ohms, 70V.
Fullcompass.com
Delivery: in USA
Report
$2,650.00
Part of Crown’s DriveCore series, DCI4-300 is a high performance installation amplifier based on the proprietary DriveCore technology. Engineered to provide the flexibility required for 21st century installed sound applications, DCI4-300 is loaded with advanced features including analog & digital inputs, networking monitoring and control, programmable general purpose input/output ports and digital signal processing. True rack size means this amplifier fits within standard rack mounts and can be turned on/off remotely when integrated into your control system. Designed for flexibly, DCi power all loads on a channel-by-channel basis, allowing drive in either one or two speakers in low-Z mode or multiple in high-Z mode (70 Vrms or 100 Vrms). Even in 100 Vrms mode, the DCi Series channels are bridgeable—which means more adaptability for higher power applications such as subwoofers. With advanced versatility, DCi Series amplifiers are also compact and highly energy-efficient to exceed the demands of your installed sound needs.FeaturesDirect Drive Constant VoltageChannel Independent Hi-Z/Low-Z SelectionBridgeable Channel PairsRemote On/Off InterfaceEfficient Cooling DesignAdvanced Power Factor Correction (PFC) Universal Power SupplySpecificationsChannels: FourPower:2 Ohms: 150W4 Ohms: 300W8 Ohms: 300W16 Ohms: 150W70 Vrms: 300W100 Vrms: 300WFrequency Response: (8 Ohms, 20 Hz - 20 kHz): +/- 0.25 dBSignal To Noise Ratio (A-weighted): >108 dBTotal Harmonic Distortion (at full rated power, 20 Hz - 20 kHz): 0.35%Voltage Gain: 34 dBDamping Factor (20 Hz to 100 Hz): >1000Input Impedance (nominal balanced, unbalanced): 10 kOhms, 5 kOhmsMaximum Input Level before Compression: +20 dBuMaximum Input Level before Clipping: +26 dBuLoad Impedance (Stereo/Dual Mode): 2 - 16 Ohms; 70Vrms and 100VrmsLoad Impedance Bridge Mono: 4 - 16 Ohms; 140Vrms and 200VrmsCooling: Continuously variable speed forced air, front to back airflowMaximum Fan Noise (re dBA SPL @ 1M): 45Required AC Mains (+/- 10%): 100V-240V ~ 50/60 HzDimensions: 19" x 3.5" x 14.25"Weight: 20.1lbsIEC Power Connector: 15A Crown DCi 4 300 4-Channel Power Amplifier, 300W at 4 Ohms, 70V.
Product description is based on database from online stores. Be sure to verify all information directly with seller before purchasing.

How to place an order?How to add store?
Remember that online store is responsible for accuracy of information about price, warranty and delivery!
Filters