JBL 306P MkII Powered Studio Monitor with 6-inch Woofer LSR306P-MKII

Making legendary JBL performance available to every studio, the 306P MkII is a bi-amplified (dual onboard Class-D 56 watt rms Amplifiers: one for Low Frequency [LF], one for High Frequency [HF]) next-generation studio monitor unit with magnetically-shielded 6” LF Transducer and 1” Soft-Dome HF Transducer and Image Control Wave Guide. Includes balanced XLR and ¼" Inputs with Dented Level Control, New LF Boundary Control; HF Trim Controls.A room's dimensions and acoustics can strongly affect sonic accuracy, so the 306P MkII lets you adjust the response to fit your studio. The Boundary EQ attenuates the LF boost that can occur when monitors are placed directly on a desktop or near walls. The 3-position HF Trim switch allows you to tailor the monitor's HF response to room acoustics or personal tastes.Ready for the most demanding production right out of the box, its 112 watts total power from dual, integrated Class-D power amplifiers, custom designed by JBL for each transducer, give you generous dynamic range for any project. From music production to podcasting to cinematic sound design or daily vlogging, enjoy the output and power to hear exceptional detail at any volume—even at peak SPL. Simply plug in, power on, and start creating.306P MkII FeaturesPatented Image Control WaveguidePatented Slip Stream™ LF portNext-generation JBL transducersDual Class-D power amps3-position HF Trim switchBoundary EQSpecificationsLF Driver Size: 165mm (6.5")HF Driver Size: 25mm (1")HF Driver Type: Soft domeCrossover: 1425 Hz 4th-order acoustic Linkwitz-RileyInput Sensitivity: (-10 dBV INPUT): 92 dB / 1mPower Configuration: Bi-amplifiedHF Driver Power Amp: 56 W, Class-DLF Driver Power Amp: 56 W, Class-DFrequency Response: (±3 dB): 47 Hz to 20 kHzFrequency Range: (-10 dB): 39 Hz to 24 kHzLow Frequency Extension: (-10 dB): 39 HzMaximum Continuous SPL: 92 dBMaximum Peak SPL: 110 dBMaximum Peak Input Level: (-10 dBV / +4 dBu): +6 dBV / +20.3 dBuSystem Distortion CriteriaElectrical Distortion Criteria: 0.2% THD @ 1 kHz / 2.83 VRMS output;Signal to Noise Ratio: 75 dBA (A-Weighted), 70 dBr (unweighted), relative to 2.83 VRMS outputCoverage (Horizontal x Vertical): 120° x 90°Analog Input Types: 1 x XLR female, 1 x TRS female, balancedHF Trim Control: -2 dB, 0 dB, +2 dBBoundary EQ: LF Shelf @ 50 Hz: -3 dB, -1.5 dB, 0 dBAC Input Voltage: 100 – 240 VAC (±10%), 50 / 60HzEnclosure Type: PortedEnclosure Construction: 15mm MDFEnclosure Finish: Matte black PVCBaffle Construction: Injection-molded structural ABSDimensions(H x W x D): 361 x 224 x 282mm (14.2" x 8.8" x 11.1")Weight: 6.1 kg (13.42 lbs.)Note: further information can be found within the items located under the "Documentation" tab above. JBL 306P MkII Powered Studio Monitor with 6-inch Woofer.