Electro-Harmonix 1440 Stereo Looper Pedal 1440LOOPER

High-quality stereo looping with powerful performance features like Reverse and Octave effects, and 1-Shot playback for creative looping!The EHX 1440 Stereo Looper is a compact powerhouse that provides 1440 seconds of high-quality, uncompressed, stereo recording time plus the ability to store 20 different loops. It can tempo sync to an external MIDI device and is packed with features you'll want. Unlimited overdubbing means you can lay down as many parts as you like while variable tempo playback plus Reverse and Octave speed effects really enhance creative control.Also included are a 1 Shot function, adjustable fadeout times and optional external footswitch control for selecting loops and Undo/Redo. The affordable 1440 Stereo Looper puts a ton of looping power on your pedalboard.The EHX 1440 Loop Manager app allows you to import your 1440 loops to your computer for back up or to use in other software.Level KnobControls the output level of the loop being played.Tempo KnobControls a loop's playback and overdub speed.Overdub KnobThis knob acts like a feedback control for the looper during overdubs.Mode Knob And ButtonThe MODE knob has two functions:1.Cycling through the available modes2. Adjusting the value of the selected mode. All modes and values are shown on the 4-digit display. The MODE knob has no pointer because it can be continuously rotated in either direction and can also be pushed like a button.FC JackUse this jack with the Electro-Harmonix Triple Foot Controller to control the 1440 bank up, bank down, and instant undo-redo.MONO/L Output JackThe Left output signal is sent through this jack. The dry signal present at the Left input will be output on the MONO/L Output jack only. The source impedance of the MONO/L Output is approximately 370 Ohm.R Output JackThe Right output signal is sent through this jack. The dry signal present at the Right input jack is output to the R Output jack only. The source impedance of the R Output is 370 Ohm.Reverse ButtonPress the REVERSE button to play the loop in reverse. The REVERSE button glows green when enabled. Reverse can be initiated at any time: during playback, overdub or even before recording a new loop. If REVERSE is enabled upon ending a new loop recording, the loop will immediately playback or overdub in reverse.Octave ButtonPressing the OCTAVE button causes the speed of the loop to drop by half so that the pitch of the loop goes down one octave and the tempo is halved. If a loop is overdubbed during half-speed mode, returning to normal speed playback causes the pitch of the overdub to go up one octave and the tempo is doubled.The OCTAVE button glows green when enabled. OCTAVE can be used at any time during playback or while overdubbing a loop. If OCTAVE is enabled prior to new loop recording, the loop will immediately playback or overdub at half-speed.1 Shot ButtonPressing the 1 SHOT button enables or disables 1 SHOT mode. When 1 SHOT is enabled and its button is lit, the loop plays back once