Rolls RM67 Microphone / Source Mixer, 1 Rack Unit

Rolls' RM67 is a single-rackspace mixer designed for the install/contractor market. The unit mixes three balanced microphones with four stereo sources to mono or stereo balanced outputs. The XLR Microphone Inputs have Mic/Line level switches, a send/return Insert jack, and individually switchable +12 VDC phantom power. Priority talkover, with variable Duck Sensitivity is available on one microphone for paging, and on one Source input for use on a jukebox. telephone system, etc. Each Microphone input has a level and tone control, and each Source input has a level control. Bass and Treble controls have been provided for all the sources, and a Master Output Level control adjusts the level of all mixed signals. Source One has an added front-panel 3.5mm input. A pre-Master RCA output has been provided for recording, and a Remote Volume output jack is provided for connection to a 100K ohm linear taper potentiometer and used as an external master level control.FeaturesThree XLR mic inputs with switchable phantom power and input paddingFour stereo RCA line/consumer level inputsMic insert jack for adding signal processing to the mic inputsPriority ducking/talkover for mic paging and jukeboxStereo record outSpecificationsInput Impedance, Mic: 600 Ohms XLR balancedInput Impedance, Line: 22K OhmsSource: 22K Ohms gold plated RCAMic Insert: 22K Ohms 1/4" TS unbal.Max Input Level, Mic: -14 dBV Mic level, +20 dB Line levelSource: 24 dBVConnectors: 3: XLR, 6: Stereo RCA, 3: 1/4" TRS, 1:1/4" TS, 1: 3.5mmPhantom Power: +12 VDCOutput Level: +17 dBV maxOutput Impedance: 51 OhmsMax Gain: Mic 60 dB, Source 26 dBTone Controls: +/-12 dB 100 Hz Bass, +/-12 dB 11kHz TrebleNose Floor: - 80 dB, THD:< .025%, S/N Ratio: 96 dBDimensions: 19" x 1.75" x 6" (48.3 x 4.5 x 15 cm)Weight: 5 lbs. (2.3 kg) Rolls RM67 Microphone / Source Mixer, 1 Rack Unit.