Rolls RA62c 6-Channel , 1 Rack Unit
 |
 |
Close
The Rolls RA62c is a six-channel headphone/earphone amplifier for professional audio monitoring. A variety of input options are available including 1/4", RCA, and balanced XLR. Since the MONO/STEREO switch is after the pan control, it will mix two mono signals and their balance can be adjusted with the pan control. With the addition of rear panel Direct Input connectors, each channel may mix a second stereo signal.Rolls RA62c Features:Six Channels of clean, quiet headphone/earphone amplificationIndividual Direct Inputs to mix separate stereo signal with Main Input signals1/4" and 3.5mm Headphone/Earphone OutputsLED Clip indicationStereo/Mono operationRolls RA62c Specifications:Input Impedance: 10k Ohms unbalancedMax Input Level: +18 dBVInput Connectors:1/4" TRS stereo, R & L bal. / unbal. 1/4"RCA, R & L balanced XLR6: 1/4" TRS Direct Input jacksOutput Connectors:12: 1/4" TRS Stereo jacks6: 1/8" (3.5 mm) TRS Stereo jacksMax Gain: 20 dB/ChannelMax Output Power: Up to 300 mW/side, 600mW/Channel (@ 16 Ohms)Frequency Response: DC - 30 kHzS/N Ratio: 90 dBTHD:< .008%IMD:< .008%Phase Shift (In to Out): 0°Slew Rate: 25 V per microsecondCrosstalk: -65 dBPower: 12 VAC (Rolls Model PS12)Dimensions: 19" x 1.75" x 6.5" (48 x 4.5 x17cm)Weight: 7 lbs (3 kg) Rolls RA62c 6-Channel Headphone Amplifier, 1 Rack Unit.
The product description is generated based on data from online stores. Before purchasing be sure to verify all information directly with the seller.
DAC for Hi-Fi audio: what is it and how to choose the right one?What is a DAC, why is it needed and what characteristics should be taken into account when choosing a device
All About Headphone Noise Canceling Technology: ANC, Talk Through, Ambient Aware and Adaptive Noise CancelingUnderstanding the intricacies of active noise cancellation in headphones
We recommendCompare using chart →
stationary, DAC: AKM AK4452, 384 kHz, 32 bit, headphone output: 32 – 300 Ohm, mini-Jack 3.5 mm, 330 мВт at 32 Ohm, 120 мВт at 300 Ohm, signal/noise 93 dB
stationary, headphone output: 30 – 600 Ohm, Jack 6.35 mm, 10 – 100000 Hz, signal/noise 100 dB
portable, DAC: Asahi Kasei AK4490, 382 kHz, 32 bit, headphone output: 8 – 300 Ohm, Jack 6.35 mm, 500 мВт at 32 Ohm, 20 – 20000 Hz, signal/noise 112 dB
stationary, headphone output: 30 – 600 Ohm, Jack 6.35 mm, 500 мВт at 32 Ohm, 20 – 20000 Hz, signal/noise 90 dB
stationary, DAC: Burr-Brown PCM5102, 96 kHz, 24 bit, headphone output: 16 – 150 Ohm, mini-Jack 3.5 mm, 200 мВт at 32 Ohm, 20 – 20000 Hz, signal/noise 105 dB
portable, DAC: CS43131, 384 kHz, 32 bit, headphone output: mini-Jack 3.5 mm, Pentaconn 4.4 mm, 20 – 50000 Hz, signal/noise 122 dB
Bluetooth-amplifier, portable, DAC: AK4191EQ+AK4499EX, 768 kHz, 32 bit, headphone output: 8 — 350 Ohm, mini-Jack 3.5 mm, Pentaconn 4.4 mm, input USB C, 1250 мВт at 32 Ohm, 170 мВт at 300 Ohm, 20 — 80000 Hz, signal/noise 123 dB
stationary, DAC: AK4493S, 384 kHz, 32 bit, headphone output: 16 – 300 Ohm, Jack 6.35 mm, Pentaconn 4.4 mm, 2440 мВт at 32 Ohm, 280 мВт at 300 Ohm, 20 – 20000 Hz, signal/noise 120 dB
Bluetooth-amplifier, portable, DAC: Cirrus Logic CS43131, 96 kHz, 24 bit, headphone output: mini-Jack 3.5 mm, Pentaconn 4.4 mm, input USB C, 165 мВт at 32 Ohm, 20 – 45000 Hz, signal/noise 117 dB
