Glade Automatic Spray Battery-Operated Holder for Automatic Spray Refill

DIRECTIONS FOR USE: OPERATION: Please read and retain all safety use instructions. TO OPEN UNIT: Press button at top, while pulling sides of holder apart. When unit is open, always make sure the timer is set to OFF position and keep spray nozzle pointed away from face. TO INSERT CAN: Open unit. Pull out red tab to activate batteries. Remove the cap from the can and insert the can with the nozzle facing out. Turn the unit on by selecting your desired time setting in minutes, and close the unit. A spray will occur at the selected time interval. For an instant burst of Glade fragrance anytime, press the boost button on the back of the unit. REPLACING THE BATTERY: Open unit and remove the can to access the batteries. Remove old batteries and replace with two new alkaline batteries. Replace can, set timer, and close unit. USES: Use in any room where an instant releasing fragrance burst is needed. WARNINGS: CONTENTS UNDER PRESSURE. Contains propellants. Do not expose to heat or store at temperatures above 120°F. Do not puncture or incinerate container. EYE IRRITANT. Contains acetone. Avoid contact with eyes. FIRST AID: EYES: Immediately rinse eyes with plenty of water for at least 15 minutes. If irritation persists, get medical attention. Do not use in small confined pet areas without adequate ventilation. KEEP OUT OF REACH OF CHILDREN AND PETS. INGREDIENTS: Glade® fragrance spray sold separately.