USA

Peavey IPR2 5000 Power 03004350

Photos - Amplifier Peavey IPR2 5000 Power  03004350
Peavey IPR2 5000 Power Amplifier 03004350
from $1,000.00 

Buy Peavey IPR2 5000 Power 03004350

When you make a purchase through links on our site, we may earn an affiliate commission.

Peavey IPR2 5000 Power Amplifier 03004350

Peavey IPR2 power amplifier, designed for years of reliable, flawless operation under rigorous use. The groundbreaking IPR2 series utilizes an advanced design that allows Peavey engineers to dramatically reduce weight while increasing output power, reliability and thermal efficiency. IPR2 Series amplifiers are designed with a resonant switch-mode p... moreower supply and a high-speed class D topology that yields the highest audio resolution and efficiency available. This revolutionary amplifier offers the sonic superiority and unsurpassed reliability for which Peavey is famous, in an extremely efficient and lightweight design. Advanced technology and extensive protection circuitry allow operation with greater efficiency into difficult loads and power conditions. The DDT (Distortion Detection Technique) circuitry ensures trouble-free operation into loads as low as 2 ohms. DDT protects drivers and ensures that sonic integrity is maintained, even in extreme overload conditions. The IPR2's high-efficiency design allows the amplifier to operate at very low temperatures and does not require massive heat sinks to cool.
Adorama.com
Delivery: in USA
On order
Report
$999.99

Peavey IPR2 5000 2-Channel Power Amplifier, 1510W per Channel PV-IPR5000-I

The IPR2™ 5000 from Peavey® boasts 2,525 watts per channel at 2 Ω and weights in at under 7 kg. It features 2-channel independent 4th-order Linkwitz-Riley crossovers, a variable-speed fan housed in a lightweight aluminum chassis, DDT speaker protection, and the revolutionary IPR-2 class D topology.Features2900 W RMS x 1 at 2 Ω... more1780 W RMS x 1 at 4 Ω975 W RMS x 1 at 8 Ω2525 W RMS x 2 at 2 Ω1510 W RMS x 2 at 4 Ω890 W RMS x 2 at 8 Ω2-channel independent, 4-order Linkwitz-Riley crossoversDDT protectionRevolutionary IPR class D topologyDetented input controlsCombination XLR-¼" inputs4 pole twist-lock output connectorsUltra-light weightIndividual signal pass ¼" jacks on each channelLED illuminatedStandby, LED power present indicationSpecificationsRated Watts:2-ch x 2 Ω 3230 Watts 20ms repetitive burst / 2530 Watts 1% THD both channels driven @ 1 kHz.2-ch x 4 Ω 1985 Watts 20ms repetitive burst / 1700 Watts 1% THD / 1470 Watts 0.15% THD, both channels driven @ 1 kHz.2-ch x 8 Ω 1175 Watts 20ms repetitive burst / 1025 Watts 1% THD / 880 Watts 0.15% THD, both channels driven @ 1 kHz.Minimum Load Impedance: 2 ΩMaximum RMS Voltage Swing: 105 voltsFrequency Response:20 Hz - 22 kHz; +/- 0.5dB at 1 Watt20 Hz - 20 kHz 2-ch x 2 Ω:- 75 dB @ 1 kHz.Voltage Gain: x 40 (+32 dB)Crossover: 100Hz switchable 2nd-order high pass and 3rd low pass per channel.Crosstalk: >-60 dB @ 1 kHz @ 700 Watts power @ 8 ΩHum and Noise: >-105 dB, “A” weighted referenced to rated power @ 4 ΩSlew Rate: >12V/µsDamping Factor (8 Ω): >210:1 @ 20 Hz - 1 kHz @ 8ΩInput Sensitivity: 1.95 volts +/- 3% for 1 kHz 4 Ω rated power, 1.83 volts +/- 3% for 1 kHz 2 Ω rated powerInput Impedance: 20 kΩ, balanced and 10 kΩ unbalanced.Current Draw @ 1/8 in VA (Watts): 1435 (890) @ 2 Ω, 920 (525) @ 4 Ω, 625 (335) @ 8 ΩCurrent Draw @ 1/3 in VA (Watts): 3050 (2155) @ 2 Ω, 1880 (1200) @ 4 Ω, 1200 (715) @ 8 ΩIdle Consumption: 195 VA, 90 WattsCooling: 3 temperature dependent variable speed fans.Controls: 2 front panel attenuators, crossover select switch for HPF, Normal and LPFIndicator LED: Five LED indicators per channel: Active, Signal, DDT, Temperature and DCProtection: Thermal, DC, subsonic, incorrect loads, under and over voltageConnectors:Inputs: Dual combination ¼"-XLROutputs: Dual ¼" thru, one 2-pin and one 4-pin twist-lock connectorConstruction: 0.062” thick aluminumDimensions: 3.5" x 19" x 17" behind front panel + 0.6" for handleNet Weight: 6.2 kg (13.6 lbs.*)Gross Weight: 7.9 kg (17.4 lbs.)Weight, Unpacked: 13.67 lbs. (6.2 kg)Weight, Packed: 17.42 lbs. (7.9 kg)Width, Packed: 21" (53.34 cm)Height, Packed: 21.2" (53.848 cm)Depth, Packed: 6" (15.24 cm) Peavey IPR2 5000 2-Channel Power Amplifier, 1510W per Channel.
Fullcompass.com
Delivery: in USA
Report
$999.99
Peavey IPR2 power amplifier, designed for years of reliable, flawless operation under rigorous use. The groundbreaking IPR2 series utilizes an advanced design that allows Peavey engineers to dramatically reduce weight while increasing output power, reliability and thermal efficiency. IPR2 Series amplifiers are designed with a resonant switch-mode power supply and a high-speed class D topology that yields the highest audio resolution and efficiency available. This revolutionary amplifier offers the sonic superiority and unsurpassed reliability for which Peavey is famous, in an extremely efficient and lightweight design. Advanced technology and extensive protection circuitry allow operation with greater efficiency into difficult loads and power conditions. The DDT (Distortion Detection Technique) circuitry ensures trouble-free operation into loads as low as 2 ohms. DDT protects drivers and ensures that sonic integrity is maintained, even in extreme overload conditions. The IPR2's high-efficiency design allows the amplifier to operate at very low temperatures and does not require massive heat sinks to cool.
Product description is based on database from online stores. Be sure to verify all information directly with seller before purchasing.

How to place an order?How to add store?
Remember that online store is responsible for accuracy of information about price, warranty and delivery!
Filters