8 in. Long Nose Pliers PGF10008-D

Fine Tipped Jaws: Tapering to a fine tip just at the nose, the jaws are thick and wide at the base so they won't roll over each other or separate when you are aggressively pulling or twisting. Crosscut Teeth: Oriented at 120° to each other 60° to each side of the jaw centerline the serrations are cut in 2 passes to form regularly-spaced, diamond-shaped teeth. Unlike single serrations that are cut straight across the jaw, this pattern creates uniform contact across the jaw surface, allowing you to grasp, pull and twist evenly in any direction. Induction-Hardened Side Cutter for Soft Wire: Machining to an optimized 65° angle allows the blades to be strong yet sharp, producing a satisfyingly smooth, clean cut that requires minimal effort. After the full pliers have been heat treated, a secondary induction-heating process hardens just the blades to 58 HRC to 64 HRC, making them extremely durable and able to cut tougher materials. Lean and Practical Grips: Single-layer vinyl grips offer a bit of comfortable cushion and provide a smooth, yet nonslip surface. They're slim, not thick and bulky, so they stay out of the way when space is tight and are always easy to handle, even with gloves on.